Search
Search Results
-
A Practical Mix Design Method of Ground Granulated Blast-Furnace Slag-Based One-Part Geopolymer Concrete
The lack of a code for preparing one-part geopolymer concrete (GPC) is one of the major obstacles to its wide use. This study adopted one of the most...
-
Development of Rapid-Setting Repair Materials Through One-Part Geopolymer Technology
The development of geopolymer materials has been over 35 years. Compared with ordinary portland cement (OPC), geopolymer materials have many...
-
Comparison of Microstructural Properties of One- and Two-Part Fly Ash Geopolymer Concretes
Geopolymerization is a chemical process involving reacting raw aluminosilicate minerals with alkali activators such as sodium hydroxide and potassium...
-
Comparison Between Cement-Rice Husk Ash and Cement-Rice Husk Ash One-Part Geopolymer for Stabilized Soft Clay as Deep Mixing Material
This study explored the potential utilization of rice husk ash (RHA) as a pozzolanic material, aiming to enhance the unconfined compressive strength...
-
Investigations on Ambient Cured Alkali-Activated One-Part Geopolymer Concrete
The rapid infrastructure development in the world have constructed necessity for construction materials with sustainability and lesser carbon...
-
Compressive Strength of Mortar Made with One-Part Geopolymeric Binder
One-part geopolymer concrete is an advancement over the conventional two-part geopolymer concrete. In this study, a geopolymeric binder was prepared...
-
Properties of flyash based wood geopolymer composite
Geopolymers are inorganic adhesive synthesized from industrial waste such as fly ash thus the development of wood geopolymer composite would be a low...
-
Characteristic of One-Part Geopolymer as Building Materials
Safety concerns in handling alkali solutions for traditional geopolymers have prompted the development of one-part geopolymer in which solid...
-
Sustainable next-generation single-component geopolymer binders: a review of mechano-chemical behaviour and life-cycle cost analysis
Geopolymer is relatively newer binder developed as an alternative to conventional cementitious binders. It lowers CO 2 emissions, consumes less...
-
Experimental Investigation on Mechanical Properties of Recycled Geopolymer Concrete Aggregates-Based Geopolymer Concrete (M40 Grade)
The present work endeavours an assessment on the performance of geopolymer concrete (GPC) that makes use of Recycled Concrete Aggregates (RCA) as...
-
Mechanical Behavior of Geopolymer Concrete
Geopolymer concrete is a sustainable, economical, environmentally friendly, durable, and high-strength concrete. Geopolymer is the term given to the...
-
Geopolymer Haunch Beam‒Column Connection Behavior
A haunch system improves the performance of a beam-to-column structure, in combination with a geopolymer haunch, the green-concrete concept is...
-
Efficacy of Coal Gangue as a Precursor in Synthesis of Geopolymer
Geopolymers are three-dimensional aluminosilicate binder materials developed from various raw materials such as industrial by-products that are rich...
-
Effects of alkaline concentration on workability and strength properties of ambient cured green geopolymer concrete
Geopolymer concrete, made with by-products from industrial waste, is a promising construction material that reduces carbon dioxide emissions and...
-
Effect of Coarse and Fine Recycled Concrete Aggregates on the Performance of Geopolymer Concrete
This paper examines the performance of geopolymer concrete containing coarse and fine recycled concrete aggregates (RCA) in terms of strength and...
-
Microstructure characteristics of geopolymer aggregate concrete on the effect of liquid/slag ratio
The aggregate demand occurs due to increased growth rate of construction activities. The insufficiency of aggregates is result of demand which arise...
-
Impact of Surface Treatment on the Strengthening of Geopolymer Composites Reinforced with Short Sisal Fibers
This paper presents a first-time investigation into the effects of an eco-friendly sodium bicarbonate fiber treatment on the mechanical properties of...
-
Effect of Synthesis Parameters on Fresh and Hardened Properties of Slag-Waste Glass Binary Geopolymer
Waste glass is a major constituent in municipal solid waste, containing significant amount of silica (55–72%). Its potential usage in geopolymer...
-
Optimal slag content for geopolymer composites under freeze-thaw cycles with different freezing temperatures
Improving the freeze-thaw resistance of geopolymers is of great significance to ensure their durability in cold regions. This study presents an...
-
Performance of nano titania-reinforced slag/basalt geopolymer composites
In Egypt, basalt manufacturing generates waste materials at a rate of about 33%. The disposal of basalt waste through the manufacturing of...
