Search
Search Results
-
Bulging Distortion of Austenitic Stainless Steel Sheet on the Partially Penetrated Side of Non-Penetration Lap Laser Welding Joint
Non-penetration laser welding of lap joints in austenitic stainless steel sheets is commonly preferred in fields where the surface quality is of...
-
Effect of bottom sheet thickness on weld properties during laser lap welding of aluminum and copper
Continuous laser lap welding for a dissimilar combination of aluminum (Al) and copper (Cu) was achieved successfully. The successful welding was...
-
Optimization of laser beam spot welding (LBSW) parameters to maximize the load bearing capability of AHS-DP1000 steel lap joints
Laser beam spot welding (LBSW) is a high energy density fusion welding process in which laser beam (LB) is used to spot weld two metal sheets. The...
-
Hole inhibition mechanisms of Mg/steel lap joint by pinless friction stir spot welding
Pinless friction stir spot welding (P-FSSW) was performed to manufacture Mg/steel lap joints. Orthogonal tests for P-FSSW of Mg/steel were...
-
Joining of AA5052 to CF/PEEK by friction lap welding
The joining of aluminum alloy AA5052 and carbon-fiber-reinforced polyether ether ketone (CF/PEEK) by friction lap welding was investigated under...
-
Laser Welding of Lightweight Alloys
In this modern era, the importance of using light alloys in various manufacturing sectors such as automotive, military, biomedical, and aerospace has...
-
Application of laser welding to STS301L side structure of railway vehicles(I) - vertical incidence welding conditions for laser beam based on multiple regression analysis
In this study, the vertical incidence welding conditions of laser welding was tested to improve the finished appearance by replacing the resistance...
-
Numerical Analysis of Conduction Mode Laser Welding of Aluminium 2024 Alloy in Lap Joint Configuration
Aluminium alloys are one of the most difficult materials to weld, but those are in great demand across a wide range of industrial sectors. A...
-
Mechanism of Gap Bridgeability in Lap-Fillet Laser-Arc Hybrid Welding
Laser-arc hybrid welding is known for its superior joint strength relative to arc welding and its ability to fill the gap that laser welding cannot...
-
Plasma Arc Welding of 780CP High Strength Steel Sheet Lap Joint for Tensile Strength of 100% Compared to Base Metal
Homogeneous and heterogeneous PAW (plasma arc welding) experiments were conducted to obtain weld beads with tensile strength of 100% or more compared...
-
Dissimilar Metal Joining by Laser Welding
This chapter presents the fundamentals of laser welding, commons mode of laser welding, issues encountered during laser welding of dissimilar metals....
-
Similar and dissimilar lap friction stir welding of titanium alloys: on the elimination of the hook defect
This work investigates similar and dissimilar lap FSW of commercially pure titanium (CP-Ti) and Ti6Al4V sheets welded with two different tool shapes,...
-
Study of Dissimilar Laser Welding: A Review
Laser beam welding (LBW) is an advanced welding technique having high-power density and a small focal spot that has been widely applied to join...
-
Improvement of electrical and mechanical properties of laser welded lap joints via dimensional optimization
With the proliferation of electric drivetrains, the development and optimization of joining techniques for the fabrication of battery packs became a...
-
Effect of spiral welding path and laser power on weld in laser welding of aluminum tab for lithium-ion battery
This study reports aluminum tab-to-tab laser welding for connecting components in lithium-ion batteries. In this study, laser welding was conducted...
-
Laser Visual Sensing and Process Control in Robotic Arc Welding of Titanium Alloys
Sensor errors arise from detecting the weld seam profile of titanium alloys with laser-based vision sensors because the surface of such a material is...
-
Application of laser welding to STS301L side structure of railway vehicles (II) - incidence angle welding conditions for laser beam based on multiple regression analysis of dummy variables
This study was conducted to determine the applicability of welding by the incidence angle of a laser beam to prevent laser head interference when a...
-
Optimization of ultrasonic welding parameters to maximize the tensile shear fracture load bearing capability of lap welded ABS plastic sheets
ABS is a popular material for structural applications in automotive sector because of its low cost, high apparent shine and finishing, ease of...
-
Laser Wobble Welding Process: A Review on Metallurgical, Mechanical, and Geometrical Characteristics and Defects
The laser wobble welding process has emerged as a novel welding technique designed to overcome the limitations of the conventional laser welding...
-
Study of beam wobbling technique and porosity formation in laser welding of ultra-thin AA1050 sheet—microstructural and mechanical analysis
The fabrication of lightweight components has been at the forefront of technological advancements in present-day electrical vehicle components....
