Search

Search Results

1. Quality improvement of refill friction stir spot welds in 2A12-T42 aluminum alloy with alclad by adjusting sleeve design

   In this study, a modified sleeve was utilized for refill friction stir spot welding (RFSSW) of 2A12-T42 aluminum alloy sheet compared to a...

   Guangda Sun, Yuxuan Li, ... Qiang Meng in The International Journal of Advanced Manufacturing Technology

   Article 13 December 2023
   

2. A fully coupled thermo-mechanical numerical modelling of the refill friction stir spot welding process in Alclad 7075-T6 aluminium alloy sheets

   Refill friction stir spot welding (RFSSW) is a solid state joining technology that has the potential to replace processes such as the open-air fusion...

   Andrzej Kubit, Tomasz Trzepiecinski in Archives of Civil and Mechanical Engineering

   Article Open access 03 October 2020
   

3. Effects of Multipass Additive Friction Stir Processing on Microstructure and Mechanical Properties of Al-Zn-Cu_p/Al-Zn Laminated Composites

   A laminated composite of Al-Zn alloy reinforced with copper powder has been fabricated using friction stir additive manufacturing (FSAM). For this...

   Ahmad Ardalanniya, Salman Nourouzi, Hamed Jamshidi Aval in JOM

   Article 28 June 2021
   

4. Nonferrous Materials and Their Heat Treatment

   Nonferrous metals and alloys are increasingly used today because of their numerous superior properties over ferrous materials. They constitute...

   D. K. Singh in Fundamentals of Manufacturing Engineering

   Chapter 2024
   

5. Review of Retrogression Forming and Reaging for AA7075-T6 Sheet

   RetrogressionRetrogression forming and reaging (RFRA) is a new warm-formingWarm-forming process designed to produce automotive structural components...

   Katherine E. Rader, Jon T. Carter, ... Eric M. Taleff in Light Metals 2021

   Conference paper 2021
   

6. Polyoptimisation of the refill friction stir spot welding parameters applied in joining 7075-T6 Alclad aluminium alloy sheets used in aircraft components

   In the aerospace industry, the refill friction stir spot welding (RFSSW) method is increasingly used to join thin sheets, especially those made of...

   Rafał Kluz, Andrzej Kubit, ... Koen Faes in The International Journal of Advanced Manufacturing Technology

   Article Open access 04 May 2019
   

7. Computational analysis of thermo-mechanical characteristics in refill FSSW of thin AA7075-T6 sheets using smoothed-particle hydrodynamics

   A 3D thermo-mechanical model was developed employing the smoothed-particle hydrodynamics (SPH) technique to simulate the refill friction stir spot...

   Venkata Somi Reddy Janga, Mokhtar Awang, ... Eng Ban Wee in Computational Particle Mechanics

   Article 10 October 2023
   

8. Exploring a novel chamfered tool design for short duration refill friction stir spot welds of high strength aluminium

   This work investigates refill friction stir spot welded joints of AA2024-T3 aluminium alloy, produced with short welding times between 3 s and...

   Jonathan Draper, Sebastian Fritsche, ... Athanasios Toumpis in The International Journal of Advanced Manufacturing Technology

   Article Open access 05 March 2024
   

9. Analysis of the mechanism of fatigue failure of the Refill Friction Stir Spot Welded overlap joints

   The aim of this work is the experimental investigation of fatigue failure in Refill Friction Stir Spot Welding joints. The specimens for the fatigue...

   Andrzej Kubit, Tomasz Trzepiecinski, ... Koen Faes in Archives of Civil and Mechanical Engineering

   Article 09 October 2019

10. Research advances in fatigue behaviour of clinched joints

    In order to meet the increasingly stringent emission standards, a wide variety of lightweight materials are accounting for an increasing proportion...

    Fulong Liu, Wei Chen, ... Limin Dong in The International Journal of Advanced Manufacturing Technology

    Article 10 May 2023
    

11. A

    ABC Analysis An Operations Management term related to inventory; a selective inventory control technique which uses Pareto principle to classify the...

    D. K. Singh in Dictionary of Mechanical Engineering

    Chapter 2024
    

12. X-Ray Computed Tomography of Fracture Paths in AA7075-T6 Sheet Torn at 200 °C

    X-ray computed tomography (XRCT)X-Ray Computed Tomography was used to characterize fractureFracture paths in AA7075-T6 sheet subjected to ductile...

    Danny Nikolai, Philip Noell, Eric Taleff in Light Metals 2024

    Conference paper 2024
    

13. Investigation of optimal solid solution heat treatment temperature and artificial aging time of Al7075 sheet

    Solid solution heat treatment test of Al7075 sheet (300×500×2.5) are performed according to temperature conditions. Peak aging heat treatment tests...

    Min Sik Lee, Chul Kyu ** in Journal of Mechanical Science and Technology

    Article 30 March 2022

14. Consideration Analysis of Stress Distribution Using Automotive Chassis for Heavy Vehicle Transports

    The automotive chassis work to support the body and various parts of the vehicle. Additionally, it needs to withstand the stun, contort, vibration,...

    Manish Saraswat, Pradeep Kumar Singh, Rajat Yadav in Computational and Experimental Methods in Mechanical Engineering

    Conference paper 2022
    

15. Microstructural and Mechanical Characterization of Friction Stir Processed 2024 Aluminium Alloy

    The focus of the work is to present the effect of friction stir processing (FSP) on microstructural and mechanical characterization of 2024 Aluminium...

    M. Sutharsan, K. Ganesa Balamurugan, ... S. Saravanakumar in Recent Advances in Materials and Modern Manufacturing

    Conference paper 2022
    

16. Determining the Fatigue Life of Prismatic Bars Under Uniaxial Asymmetric Tension–Compression

    The number of cycles to fatigue failure of prismatic bars as under uniaxial asymmetrical tension–compression is determined. The solutions are found...

    V. P. Golub, A. V. Plashchyns’ka, O. V. Romanov in International Applied Mechanics

    Article 01 September 2023

17. Co-Extrusion of Dissimilar Al Alloys via Shear Assisted Processing and Extrusion

    Cladded tubes are generally used where two distinct properties are required at the outer and inner parts of a tube, for instance, strength and...

    Mageshwari Komarasamy, Scott Whalen, ... Darrell Herling in Light Metals 2022

    Conference paper 2022
    

18. Friction stir clinching of alclad AA2024-T3 sheets

    In order to improve corrosion resistance, alclad aluminum sheets, which are formed from pure aluminum surface layers cladded on high-strength...

    P.-C. Lin, S.-M. Lo in The International Journal of Advanced Manufacturing Technology

    Article 03 April 2017

19. Upper bound analysis of friction stir spot welding of 6061-T6 aluminum alloys

    Most of the research on friction stir spot welding (FSSW) process has been conducted experimentally. Finite element method (FEM) has been also used...

    Deok Sang Jo, Young Hoon Moon, Ji Hoon Kim in The International Journal of Advanced Manufacturing Technology

    Article 11 May 2022
    

20. Friction stir lap welding of AA2024-T4 with drastically different thickness

    Friction stir lap welding is a promising technology to obtain high-strength joints of Al alloys in aviation and aerospace industries. Despite...

    Yanxin Zhang, Yongxian Huang, ... Qiang Fan in The International Journal of Advanced Manufacturing Technology

    Article 07 January 2020