Search

Search Results

1. Viscoelastic Moduli and Path-Dependent Hardness Across Four Decades of Timescale in Semicrystalline Polymers from Berkovich Nanoindentation

   Berkovich nanoindentation was used to characterize viscoelastic and viscoplastic deformations in the semicrystalline polymers, poly(ether ether...

   Joseph E. Jakes, Jane O’dell, Donald S. Stone in JOM

   Article 08 May 2024
   

2. Analysis of the Microstructure and Hardness of Flake Graphite Cast Iron Using the Barkhausen Noise Method and Conventional Techniques

   The new brake disc was evaluated for microstructure and hardness by the conventional destructive tests and non-destructive Barkhausen noise method...

   Katarzyna Makowska, Zbigniew L. Kowalewski in Journal of Nondestructive Evaluation

   Article Open access 27 April 2024
   

3. Enhancing Wear Behavior and Hardness of D5 Cold Work Tool Steel through TiCrN Multilayer Nanocoating via Physical Vapor Deposition

   Abstract

   The purpose of this research was to enhance the wear behavior and hardness of cold work D5 tool steel by depositing a TiCrN multilayer...

   Amirhossein Meysami, Reza Amini Najafabadi, ... Taghi Isfahani in Surface Engineering and Applied Electrochemistry

   Article 01 February 2024
   

4. Modeling and optimization of bead geometry and hardness of bead on plate TIG welds of Stainless Steel SS202

   The quality and load-carrying capacity of weldments mainly depends on selecting suitable levels of input welding parameters. Current research intends...

   Anand Baghel, Chaitanya Sharma, ... Vikas Upadhyay in International Journal on Interactive Design and Manufacturing (IJIDeM)

   Article 14 July 2023
   

5. Investigating the influence of single and multicomponent activated fluxes on macrostructure, microstructure, and hardness of ATIG welded SS304

   This study investigates the effect of activated fluxes TiO ₂ , SiO ₂ , and Fe ₂ O ₃ and their mixtures on the microstructure and hardness of tungsten inert...

   Anand Baghel, Chaitanya Sharma, ... Rajat singh in International Journal on Interactive Design and Manufacturing (IJIDeM)

   Article 25 November 2023
   

6. Heat Treatment Effects on Microstructure and Hardness of Low-Carbon AISI 1020 Steel

   Heat treatment can change the properties of any metal by changing its size and orientation of grain structure. Structural steel is particularly...

   P. Pavan Kumar Reddy, Saurabh Dewangan, ... Amrita Biswas in Journal of The Institution of Engineers (India): Series D

   Article 12 April 2024
   

7. Correlation Between Tribological Behaviour and Hardness of Mollusc Shell-UHMWPE Composite

   This study addresses the effect of hardness in the tribological behaviour of Mollusc Shell (MS)-UHMWPE composite. FTIR analysis was performed for the...

   Besma Sidia, Walid Bensalah in Advances in Integrated Design and Production II

   Conference paper 2023
   

8. Adding WC Nano-particles to Nickel-Based Coating Deposited by PTA Process: Microstructure and Nanoindentation Hardness Characteristics

   The influence of the introduction of tungsten carbide nanocrystalline on the microstructure and mechanical characteristics of Ni-WC composite...

   Mahmoud Abbasi, Ali Tahaei, ... Ana Arizmendi-Morquecho in JOM

   Article 27 June 2024
   

9. Janka hardness of hardwood species evaluated by the nondestructive sclerometric method

   The physical and mechanical properties are essential to exploring the potential applications of each wood species. Janka hardness allows us to...

   Ingrid Zacharias Martins, Leonardo Roso Deldotti, ... Douglas Lamounier Faria in Materials and Structures

   Article 20 October 2022
   

10. A numerical model for total bending fatigue life estimation of carburized spur gears considering the hardness gradient and residual stress

    The paper introduces a novel three-dimensional numerical model considering hardness gradient and residual stress to predict carburized gears’ total...

    **anshun Sun, Jun Zhao, ... Huiyang Sun in Meccanica

    Article 21 June 2024
    

11. A Study on Effect of Severe Plastic Deformation Process on Hardness of Aluminum Alloys

    Aluminum alloys have a wide range of applications mainly because of its high specific strength, easy to process, anti-erosion, and eco-friendly in...

    Mansi Chavan, Mayuri Abhangrao, ... Sandeep Wangikar in Techno-societal 2022

    Conference paper 2024
    

12. Experimental Investigations on Micro Hardness and Surface Morphology of Zn–TiO₂ Nano Particle Coating on Mild Steel

    The present study investigates ZnTiO ₂ coating on mild steel specimen using electro deposition technique. The specimen’s surface morphologies were...

    Sushma A. Patil, Thippeswamy Ekbote, ... A. G. Shankarmurthy in Journal of The Institution of Engineers (India): Series D

    Article 04 July 2024
    

13. Investigation of the effect of indentation spacing, edge distance and specimen thickness on the measurement of hardness

    Indentation hardness tests are widely used in engineering to test the hardness of a material, which can be performed on a macroscopic scale or...

    Luo Li, Tariq Khraishi, Yu-Lin Shen in Journal of Mechanical Science and Technology

    Article 28 January 2023

14. Analysing Microstructure and Hardness of SS-304 Under Annealed, Normalized, Quenched and Step Cooled Conditions

    SS-304 is austenitic stainless steel that possesses γ-austenite, δ-ferrite, and different carbides at room temperature. The properties of austenitic...

    Saurabh Dewangan, Shrey Mishra in Journal of The Institution of Engineers (India): Series D

    Article 24 July 2023
    

15. Age- and Strain-Hardening Effects on Internal Thread: Tensile, Hardness and Pull-Out Tests

    The aim of this paper is to compare the effects of age and strain-hardening on the mechanical behavior of aluminum internal thread obtained through...

    Hela Soussi, Anis Swissi, ... Abdelkader Krichen in Proceedings of the 2nd International Conference on Innovative Materials, Manufacturing, and Advanced Technologies

    Conference paper 2024
    

16. Investigation on the forming quality and hardness of hollow filter rods using water vapor forming method

    In this work, we describe experimental water vapor forming of hollow filter rods. The morphology, microstructure and mechanical property of hollow...

    Sanwen Peng, Gang Ouyang, ... Fengxiang Xu in Journal of Mechanical Science and Technology

    Article 03 June 2023

17. Wire-and-Arc-Additive-Manufacturing of a Component with a Pre-defined Hardness Profile

    Wire-and-arc-additive-manufacturing (WAAM) can be employed with Gas-Metal-Arc-Welding, Gas-Tungsten-Arc-Welding or Plasma-Welding to manufacture...

    Lennart Hölscher, Torben Carstensen, Thomas Hassel in Innovative Product Development by Additive Manufacturing 2021

    Conference paper 2023
    

18. Explaining hardness modeling with XAI of C45 steel spur-gear induction hardening

    This work presents an interpretability study with XAI tools to explain an XGBoost model for hardness prediction in the simultaneous double-frequency...

    Sevan Garois, Monzer Daoud, Francisco Chinesta in International Journal of Material Forming

    Article 29 August 2023
    

19. Effect of wire arc additive manufacturing parameters on geometric, hardness, and microstructure of 316LSi stainless steel preforms

    Additive manufacturing (AM) is a manufacturing process based on the creation of a component layer by layer, with the wire arc additive manufacturing...

    Jefferson Segundo de Lima, Júlio Feitosa da Silva Neto, ... Tiago Felipe de Abreu Santos in The International Journal of Advanced Manufacturing Technology

    Article 05 March 2024
    

20. Influence of the Contact Pliability and Relative Hardness of the Components on the Load Capacity of Bolts

    Abstract

    The load capacity of a preliminarily tightened bolt is analyzed as a function of the pliability of the components at contact (with...

    M. M. Matlin, V. A. Kazankin, E. N. Kazankina in Russian Engineering Research

    Article 27 July 2023