Search

Search Results

1. Effect of the CrB₂ Additive Content on the Structure, Mechanical Properties, and Performance Characteristics of Diamond-Containing C_diamond–(WC–Co) Composite Materials Formed by Spark Plasma Sintering

   Abstract

   The structure and mechanical properties (hardness Н , elasticity modulus Е , estimative parameters for determining the resistance to elastic H /

   B. T. Ratov, V. A. Mechnik, ... D. L. Korostyshevskiy in Journal of Superhard Materials

   Article 01 June 2023
   

2. Influence of the Rate of Gas Pressure Growth during Vacuum Compression Sintering on the Structure and Properties of the VK6M Hard Alloy

   Abstract

   Using the technology of vacuum compression sintering, which makes it possible to obtain hard alloys with a high level of mechanical and...

   M. M. Prokopiv, Yu. P. Ushchapovskyi, ... H. P. Kysla in Journal of Superhard Materials

   Article 01 April 2023
   

3. In situ micropillar compression of an anisotropic metal-organic framework single crystal

   Understanding of the complex mechanical behavior of metal-organic frameworks (MOF) beyond their elastic limit will allow the design of real-world...

   Zhixin Zeng, Yuan **ao, ... **-Chong Tan in Communications Chemistry

   Article Open access 04 April 2023
   

4. Effect of the ZrO₂ Content on the Strength Characteristics of the Matrix Material of C_diamond–(WC–Co) Composites Synthesized by Spark Plasma Sintering

   Abstract —For structurally homotypical specimens different in the ZrO ₂ content from the (94WC–6Co) + ZrO ₂ matrix material used in diamond-containing С _diamond...

   B. T. Ratov, E. Hevorkian, ... M. D. Sarbopeeva in Journal of Superhard Materials

   Article 01 June 2024
   

5. Phase Formation and Physicomechanical Properties of WC–Co–CrB₂ Composites Sintered by Vacuum Hot Pressing for Drill Tools

   Abstract

   Some new data on the effect of chromium diboride additives (within a range from 0 to 10 wt %) on the phase formation and physicomechanical...

   B. T. Ratov, V. A. Mechnik, ... A. A. Shukmanova in Journal of Superhard Materials

   Article 01 January 2022
   

6. Measurement of Strength and Fracture Load of Weathered Samples of Polymer Composite Materials

   Abstract

   The aging of a series of aviation fiberglass and carbon fiber reinforced plastics based on epoxy binders after three years of exposure in...

   O. V. Startsev, I. M. Veligodsky, ... M. A. Gorbovets in Polymer Science, Series D

   Article 14 June 2024
   

7. Numerical and Experimental Investigation of Static Four-point Bending Response of Honeycomb Sandwich Structure: Failure Modes and the Effect of Structural Parameters

   The aim of this study is to characterize and assess failure modes and the effect of structural parameters of honeycomb sandwich structure. The...

   Yan Li, Fusheng Wang, ... Yuxue Zhang in Fibers and Polymers

   Article 27 March 2021

8. The improvement of mechanical properties of repair and construction compositions based on epoxy resin with mineral fillers

   The mechanical properties of repair composites and P-concretes based on epoxy diane resin binder (ED-20, 100% wt) + (L-20, 90% wt) modified with...

   Sergey Savotchenko, Ekaterina Kovaleva, Aleksei Cherniakov in Journal of Polymer Research

   Article 18 June 2022
   

9. A Mathematical Model of Flexural-Creep Behaviour for Future Service Expectancy of a GFRP Composite Cross-Arm with the Influence of Outdoor Temperature

   Exposure to high temperatures can damage GFRP laminates’ mechanical properties and, as a result, degrade their long-term performance, leading to...

   Abdulrahman Alhayek, Agusril Syamsir, ... M. R. M. Asyraf in Fibers and Polymers

   Article 06 July 2023
   

10. A Study of the Mechanical Properties of Biaxial and Triaxial Braided Composites for an Automotive Propeller Shaft

    Composite materials using braided fiber reinforcements have received a great deal of interest for the realization of a lightweight, energy-saving...

    Haejoong Na, Luis Trueba Jr., Byoung-Hee You in Fibers and Polymers

    Article 21 August 2022

11. Jersey from Synthetic Yarns as a Construction Composite Filler

    Composite samples obtained based on gypsum and jersey were subjected to bending tests. The jersey fabric was made of para-aramid filament and...

    A. V. Truevtsev, E. S. Tsobkallo, ... A. A. Anisimova in Fibre Chemistry

    Article 01 September 2023
    

12. Cross-linking network topology and durability in silicone rubber sealants for PEMFCs: the impact of curing systems and nanosilica interactions

    This study investigates the durability of silicone rubber compounds employed as sealants in polyelectrolyte membrane fuel cells (PEMFCs), focusing on...

    Mohammadhossein Norouznezhad, Hamed Janani in Journal of Polymer Research

    Article 12 February 2024
    

13. Progressive Damage Analysis of Carbon Fabric-reinforced Polymer Composites under Three-point Bending

    Damage evolution of carbon fabric-reinforced polymer composite with various off-axis angles during the progressive bending tests was monitored by...

    Kang-ning Han, Wei Zhou, ... Lian-Hua Ma in Fibers and Polymers

    Article 19 January 2021

14. Influence of a Sealing Layer on the Physical and Mechanical Properties of the Shell of a High-Pressure Vessel for Hydrogen Storage

    Abstract

    A method for improving the hermeticity of hydrogen storage tanks made of polymer composite materials by introducing thin metal layers into...

    A. M. Kuperman, A. Yu. Sergeev, ... V. I. Solodilov in Russian Journal of Physical Chemistry B

    Article 01 December 2022
    

15. Mechanical, Thermal, Morphological, and Fibre Characteristics During Injection Moulding of Green Composites

    The current work demonstrates the mechanical, thermal, and morphological characteristics of green composites processed by injection moulding. Bamboo...

    G. Surya Rao, K. Debnath, R. N. Mahapatra in Fibers and Polymers

    Article 03 December 2023
    

16. Static Deflection and Free Vibration behavior of Sandwich Plates Made of Hybrid Flax/Glass Fiber Composite Skins and PLA Core

    In the current work, the vibration and bending behaviour of hybrid sandwich plates is analysed using the finite element (FE) method. The sandwich...

    A. N. Shankar, Mattipally Prasad, ... A. Yvaz in Fibers and Polymers

    Article 27 June 2023
    

17. Effect of Curing Process on Tensile and Flexural Properties of 3D Woven Structural Polymer Composites

    The unstable meso-structure of preform affects the mechanical properties of 3D angle-interlock woven composites, which restricts the application in...

    Zhenyu Ma, Ruidong Man, ... Chenhui Jia in Fibers and Polymers

    Article 27 June 2023
    

18. Egg white/gelatin/carboxymethylcellulose superbly bonded and biocompatible flexible self-adhesive multifunctional sensor

    The egg white (EW)-gelatin-sodium carboxymethylcellulose (CMC) hydrogel has excellent self-adhesive properties and can adhere stably to various...

    Shuang Sun, Yizhe Xu, **eraili Maimaitiyiming in Cellulose

    Article 22 June 2024
    

19. Plant fiber-reinforced polymer composites: a review on modification, fabrication, properties, and applications

    Reducing energy consumption and minimizing environmental impacts have been significant factors in expanding the applicability of plant...

    Mahmuda Akter, Md. Haris Uddin, Habibur Rahman Anik in Polymer Bulletin

    Article 17 February 2023
    

20. How Corroded Pipelines Fail and How Are They Modeled?

    Corrosion represents a reduction of the effective wall thickness designed to support the operating conditions of the pipeline. This metal loss may...

    Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, ... Felipe Muñoz in Corrosion and Reliability Assessment of Inspected Pipelines

    Chapter 2024