Search
Search Results
-
Features of contraction of solids: cooling vs pressing
Contraction of solid elements and compounds by cooling from room temperature to 0 K or by mechanical pressing to the same volume at 298 K is...
-
Optical Ceramics Obtained by Hot Pressing of CVD-ZnSe Powder
AbstractThe influence of mechanical grinding conditions of high-purity chemical vapor deposition (CVD) zinc selenide (ZnSe) powders on their particle...
-
Effect of pressing pressure on the capacity of recycled graphite anode
Due to the increasing demand for lithium-ion batteries, there is an urgent requirement for environmentally friendly and efficient means of recycling...
-
Optimization of oil recovery from oilseed rape by cold pressing using statistical modeling
Cold pressing is frequently used to produce high-quality vegetable oils, especially from seeds with high oil content, such as rapeseeds. But, it...
-
Effect of the pressing velocity of powdered materials on the product of the external friction and lateral pressure coefficients
This paper presents the developed mathematical model that describes the influence of pressure and velocity factors on changes in the product of the...
-
Investigation of Hot Pressing Process of High-Speed Steel Powder Mixture with Diffusion-Alloyed Additive
AbstractThe paper notes the problems of high-speed steel production and proposes an alternative to the traditional sprayed powder—a powder mixture...
-
Enhancing the energy storage performance of PVDF films through optimized hot-pressing temperatures
Poly(vinylidene fluoride) (PVDF) polymers have garnered significant interest due to their dielectric tunability and applications in micro-electric...
-
Cold-Pressing Processing of a Fluoropolymer-Based Composite Material
AbstractExternal friction–assisted single-action cold pressing is theoretically analyzed as applied to powder polymer composite materials based on a...
-
Optical measurement of paper moisture content with application in paper pressing
We present a novel non-contact method for measuring the moisture content of paper. In the method, paper is illuminated obliquely by light from an IR...
-
Hot Isostatic Pressing-Induced Structural Changes in MgAl2O4 Ceramics
Abstract—Magnesium aluminate spinel (MgAl 2 O 4 ) ceramics have been subjected to hot isostatic pressing. The process led to a 0.28% increase in the...
-
Si3N4/TiN Ceramic Composites Produced by Hot Pressing
Abstract—Si 3 N 4 /TiN ceramic composites have been prepared by hot pressing in a nitrogen atmosphere using fine Si 3 N 4 and Ti powders and CaO–Al 2 O 3 ...
-
Drum Pressing Machine for Pressing Moisture-Containing Industrial Waste
The article presents the layout and technical data of the developed small-sized two-roll pressing machine for pressing moisture-containing industrial...
-
Manipulation of crystallization and dielectric relaxation dynamics via hot pressing and copolymerization of PVDF with Hexafluoropropylene
PVDF and its copolymers have gained much interest recently as they can be utilized in a wide range of technological applications. In present work the...
-
Hot pressing a high loading FeS2 all-solid-state composite cathode improves initial cycle performance
This study reports that hot pressing a high loading (9.375 mg cm −2 ; > 5 mAh cm −2 ) all-solid-state FeS 2 composite cathodes at 240 °C and 47 MPa...
-
The Influence of Hot Isostatic Pressing on the Phase Composition and Porosity of Plasma-Sprayed Ceramics of Pure Alumina
AbstractThe changes in the phase composition and porosity of plasma-sprayed Al 2 O 3 ceramic before and after its treatment by hot isostatic pressing...
-
Structure of the Aluminum-Fluoroplastic Framed Composites Produced by Explosive Pressing
AbstractThe structures of composites obtained from aluminum powders (50 and 70 vol %) and fluoroplastic-4 by explosive pressing in ampoules and by...
-
Study of Structure Formation in Polytetrafluoroethylene Filled with Aluminum after Explosive Pressing
AbstractThe features of structure formation in polytetrafluoroethylene filled with 10 and 30 vol % of aluminum after static and explosive pressing...
-
Features of the Grain-Subgrain Structure of Ti49.8Ni50.2 Alloy after Megaplastic Deformation by abc Pressing and Subsequent Annealing
AbstractUsing the backscattered electron diffraction method, the features of grain-subgrain structure of the Ti 49.8 Ni 50.2 (at %) alloy after...
-
Composite Planks Consisting of High Resilience Buffer Nonwoven Fabrics and Conductive Elastic Polymer Films via Hot Pressing Lamination: Manufacturing Techniques and Mechanical, Buffer, and Electrical Properties
Polymer-based composites are commonly used in a variety of fields because they offer many advantages. In this study, hot pressing lamination is used...
-
Change in key mechanical properties from postprocess hot pressing of commercial wood-plastic composites with different fibre contents
Wood-plastic composites contain a high proportion of wood fibres with a reduced dependence on mineral oil. In addition to decking boards, linear...