Search
Search Results
-
Thermal conductivity and specific volume heat capacity of bentonite–fly ash-based fluidized thermal backfill
Thermal characteristics such as thermal conductivity and specific volume heat capacity are the significantly important parameters for the backfill...
-
Heat Capacity of Oil Systems at High Pressures
The heat capacity per unit volume ρ c p of four crude oil samples were measured at pressure up to 1 GPa and ambient temperature using the transient...
-
High-Temperature Heat Capacity and Thermodynamic Functions of the LiNaGe4O9 Germanate
Abstract—Lithium sodium tetragermanate, LiNaGe 4 O 9 , has been prepared by solid-state reaction, by sequentially firing stoichiometric mixtures of Li 2 CO
-
Ways of Estimating the Heat Capacity of Crystalline Phases
AbstractA brief review is presented of contemporary ways of estimating heat capacity and determining their main advantages and disadvantages....
-
Thermohydraulic performance of MXene-based nanofluid in a microchannel heat sink: effect of volume fraction
Technological advancements necessitate efficient electronic heat management, driving the need for effective cooling solutions. This study...
-
Calculation of the Heat Capacity Baseline in a Model of a Two-Phase Region in the Absence of Phase Transformations and Other Transitions
Abstract —This paper presents calculations of the heat capacity baseline in a model of a two-phase locally equilibrium region for various inorganic...
-
Thermal Expansion, Heat Capacity, and Thermodynamic Properties of Monoclinic Lanthanide Orthotantalates: A Review
AbstractThis review summarized the literature data published from 1962 to the present time on the thermal expansion and thermodynamic properties of...
-
Cost-effective formaldehyde assay platform for multi-sample analysis in one run based on pervaporation coupled with a biodegradable sensor and a simple heat control unit
A novel, cost-effective platform using a biodegradable sensor and a simple heat control unit was proposed for multi-sample formaldehyde (FA) assay in...
-
Heat Transfer: Unsteady State
We have shown how heat travels through materials. However, the movement of heat does not necessarily imply a movement of temperature changes. In... -
Enhancing heat transfer efficiency and energy improvement through novel biosynthesized aqua-based silver nanofluid from leaf extract in a helical double pipe heat exchanger: a comprehensive investigation
This study investigated the convective heat transfer coefficient and friction coefficient in a copper helical double pipe heat exchanger utilizing...
-
Effect of using a ZnO-TiO2/water hybrid nanofluid on heat transfer performance and pressure drop in a flat tube with louvered finned heat exchanger
This study used an experimental setup consisting of a flat tube with a louvered finned crossflow configuration to examine the effects of utilizing a...
-
Capacity Estimation of Circulating Water-Cooling Systems Equipped with Polymeric Fills under Film Flow Conditions
A calculation method is presented for determining the capacity of small-scale cooling towers equipped with polymeric fills under film flow...
-
Heat Transfer: Steady-State Convection
In Chap. 7 , we introduced the idea of heat transport, concentrating on steady-state conduction through various... -
Investigating the effect of external heat flux and atomic structure on the thermal behavior and phase change process of sodium sulfate/magnesium chloride hexahydrate and paraffin with molecular dynamics simulation
Phase change materials (PCMs) are capable of thermal energy storage since they have a set melting point and a high latent heat of melting. PCMs offer...
-
Performance improvement of solar-assisted air-conditioning systems by using an innovative configuration of a desiccant dehumidifier and thermal recovery unit
The present study aims to construct an innovative configuration of a desiccant air conditioner that achieves thermal comfort conditions with the...
-
Heat Transfer: Radiation, Dielectric and Ohmic
As we learned in the previous chapters, in conventional thermal processes, heat is generated outside of the object to be heated and is then... -
Effects of Nanofluid Concentration on Heat Transfer Performances in Cryogenic Nanofluid Minimum Quantity Lubrication Grinding
Recently, new green processing modes of NMQL and CA have attracted high attention from Chinese and foreign researchers and have been studied... -
Heat and Mass Transfer in Spray Drying Processes with Convective-Radiant Energy Supply
AbstractThe article presents a mathematical model, numerical simulation results, and experimental investigations of heat- and mass-transfer...
-
Modification of natural clinoptilolite zeolite to enhance its hydrogen adsorption capacity
In this study, natural clinoptilolite was treated with HCl, HNO 3 , and C 2 H 2 O 4 at various concentrations (0.1, 0.5, and 1.0 M) at different...
-
Investigation of the effect of fins and magnetic field on flow maldistribution and two-phase mixture model simulation of nanofluid heat transfer in microchannel heat sink
Many attempts were made in recent years to create effective heat exchange devices in an effort to save energy and raw resources while also taking...