Search
Search Results
-
The Effect of Vacuum Ion–Plasma Treatment on the Strength of an Adhesive Joint
AbstractThis paper presents the results of a study of the effect of vacuum ion–plasma treatment on the strength of the adhesive joint of the samples...
-
Thermogravimetric Analysis of a Weld-Bonded Joint with Various Types of Adhesive Materials
AbstractAn experimental evaluation of the thermal transitions in steel and aluminum weld-bonded joints fabricated using various types of adhesive...
-
-
The Scale Factor When Testing Adhesive Joints of Heteroaramid Threads Using the “Loop” Method
AbstractThe role of the scale factor has been studied when testing the strength of the adhesive joint of heteroaramid fibers using the method of...
-
Heat Resistance of Adhesive Joints of Heterocyclic Aramid Fibers under Static Load
AbstractThe heat resistance of adhesive joints of SVM heterocyclic aramid fibers and cyanoacrylate glue has been studied based on the adhesion...
-
Complex Thermoanalytical Studies of K-800 Organosilicon Adhesive
AbstractThis paper presents the results of a complex thermoanalytical study of K-800 organosilicon adhesive. The temperatures of curing of the...
-
Deformation Properties of Elastic Adhesive in Adhesive Joints under Quasi-Static Low-Cycle Mechanical Loads
AbstractThe results of an analysis of the mechanical properties of an elastic adhesive in metal–ceramic adhesive joints under quasi-static low-cycle...
-
Characteristics of Film Adhesive of VK-105 Brand Designed for Manufacture of Parts for Structural Purpose
AbstractTechnological and operational characteristics of the VK-105 film adhesive developed by the All-Russian Research Institute of Aviation...
-
Synthesis of a Polyurethane Hot-Melt Adhesive Based on Hydroxypropylated Diphenylolpropane and Properties of Adhesive Joints Based on It
AbstractA polyurethane hot-melt adhesive has been developed that involves the use of hydroxypropylated diphenylolpropane with a molecular weight of...
-
The Influence of Technological Conditions for Forming Adhesive Primer on Coating Properties As Well As the Strength of Adhesive Joints Made with the Use of Adhesive Primer
AbstractAn anticorrosion primer based on an epoxy oligomer modified with acrylonitrile butadiene carboxylate rubber cured with an organosilicon amine...
-
Ultrasonic Technologies in Producing Adhesive Joints: A Review
AbstractAn overview of the current state of research on intensifying the processes of obtaining adhesive joints using ultrasonic vibrations is...
-
A Heat-Resistant Film Adhesive on the Basis of Cyane Ethers
AbstractA film adhesive based on dicyanoether of diphenylolpropane and polysulfone has been developed. The strength characteristics of the film have...
-
The Influence of Adhesive Characteristics on the Stress–Strain State of Glue-Welded Joints
AbstractWe have evaluated the influence of adhesive-material type on the stress–strain state variation of a glue-welded joint. Compositions of...
-
Deformation Properties of an Elastic Adhesive in Glue Joints under Quasi-Static Low-Cycle Mechanical Loads
AbstractSome results of analyzing the thermomechanical properties of an elastic adhesive in glue metal–ceramic joints under quasi-static low-cycle...
-
Corn starch blended polyvinyl alcohol adhesive chemically modified by crosslinking and its applicability as polyvinyl acetate wood adhesive
Environmental considerations coupled with fossil fuel depletion encouraged research community to implement green protocol by partially or fully...
-
New Hybrid Sublayers for Heat- and Water-Resistant Adhesive Joints of Cast Polyurethane with Metals
AbstractNew hybrid epoxyurethane adhesive compositions for attaching cast polyether urethane to the surface of AMg6 aluminum alloy are presented....
-
Production and characterization of an ecofriendly polystyrene waste adhesive made with toluene–acetone solvent
Polystyrene waste was converted into an ecofriendly adhesive using a toluene–acetone solvent system and compared to that of toluene solvent. The bond...
-
Adhesive Strength Formation of the Epoxy-Anhydride Matrix–Fiber Systems
AbstractAdhesive strength formation is studied for the epoxy-anhydride matrix–fiber systems under different curing conditions. It is shown that...
-
Application of MS-Polymer Based Adhesive–Sealants for Glazing and Glass Sealing
AbstractIn a continuation of previous studies, the possibilities of using Advaflex-3201 hybrid adhesive–sealant for the installation and sealing of...
-
The Influence of Reinforcing Fibrous Filler on Properties of VK-36 Epoxy Polysulfon Adhesive
AbstractThis work shows the influence of BMD-20 ultrathin staple fiber filler on the properties of VK-36 epoxy polysulfon adhesive and the quality of...
