SpringerLink
Log in

Characteristics of Film Adhesive of VK-105 Brand Designed for Manufacture of Parts for Structural Purpose

  • Published:
Polymer Science, Series D Aims and scope Submit manuscript

Abstract

Technological and operational characteristics of the VK-105 film adhesive developed by the All-Russian Research Institute of Aviation Materials, National Research Center “Kurchatov Institute”, have been considered. The results of rheological tests of the binder in dynamic and isothermal modes have been presented. The influence of the conditions for forming the adhesive film on the strength characteristics of the adhesive joint has been studied, and the performance characteristics of VK-105 adhesive have been compared with the existing analogues.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.

REFERENCES

  1. A. S. Kolobkov, “Polymer composite materials for various designs of aircraft,” Trudy VIAM, No. 7, 05 (2020). https://doi.org/10.18577/2307-6046-2018-0-67-38-44

  2. E. N. Kablov, V. T. Minakov, and L. I. Anikhovskaya, “Adhesives and materials based on them for the repair of aircraft structures,” Aviats. Mater. Tekhnol., No. 1, 61–65 (2002).

  3. M. M.Grigoriev, A. V. Khrulkov, Ya. M. Gurevich, and N. N. Panina, “Production of fiberglass sheathing by vacuum infusion using an epoxyanhydride binder and a semi-permeable membrane,” Trudy VIAM, No. 2, 04 (2014). https://doi.org/10.18577/2307-6046-2014-0-2-4-4

  4. E. N. Kablov, L. V. Chursova, A. N. Babin, R. R. Mukhametov, and N. N. Panina, “Developments of FSUE “VIAM” in the field of melt binders for polymer composite materials,” Polym. Mater. Tekhnol. 2, 37–42 (2016).

    Google Scholar 

  5. S. V. Kondrashov, K. A. Shashkeev, G. N. Petrova, and I. V. Mekalina, “Polymer composite materials for structural purposes with functional properties,” Aviats. Mater. Tekhnol., No. S, 405–419 (2017). https://doi.org/10.18577/2071-9140-2017-0-S-405-419

  6. A. P. Petrova, N. F. Lukina, and A. Yu. Isaev, “Performance of adhesive joints on epoxy film adhesives under simultaneous exposure to loads and climatic factors,” Trudy VIAM, No. 5, 07 (2014). https://doi.org/10.18577/2307-6046-2019-0-9-57-63

  7. I. A. Sharova, “Domestic and foreign experience in the development of cold-curing epoxy adhesives,” Trudy VIAM, No. 2, 04 (2014). https://doi.org/10.18577/2307-6046-2014-0-2-4-4

  8. I. A. Sharova, Candidate’s Dissertation (VIAM, Moscow, 2015).

  9. I. A. Sharova, N. F. Lukina, V. M. Aleksashin, and N. V. Antyufeeva, “The influence of the composition on the kinetic and strength properties of fast-curing epoxy adhesive compositions,” Klei. Germetiki. Tekhnol., No. 1, 2–5 (2015).

  10. A. I. Tkachuk, Ya. M. Gurevich, K. N. Moskvitina, and M. A. Guseva, “Technological and operational characteristics of an epoxy binder processed using prepreg technology with a curing temperature of up to 140°C,” Trudy VIAM, No. 2, 04 (2014). https://doi.org/10.18577/2307-6046-2014-0-2-4-4

  11. N. V. Ivanov, Ya. M. Gurevich, M. A. Khaskov, and A. R. Akmeev, “Study of the curing mode of the VSE-34 binder and its effect on mechanical properties,” Aviation Materials and Technologies, No. 2, 50–55 (2017). https://doi.org/10.18577/2071-9140-2017-0-2-50-55

  12. A. I. Starkov, K. E. Kutsevich, T. Yu. Tyumeneva, and A. P. Petrova. “Adhesive prepregs of reduced flammability, intended for the manufacture of integral and three-layer honeycomb structures of aircraft,” Trudy VIAM, No. 5, 04 (2022). https://doi.org/10.18577/2307-6046-2022-0-5-41-52

  13. V. V. Antipov, E. V. Kotova, N. Yu. Serebrennikova, and A. P. Petrova. “Adhesive binders and adhesive prepregs for aluminum-polymer composite materials,” Trudy VIAM, No. 5, 44–54 (2018). https://doi.org/10.18577/2307-6046-2018-0-5-44-54

  14. E. A. Veshkin, R. A. Satdinov, and R. S. Savitsky, “Approach to the choice of technological mode for PCM production,” Trudy VIAM, No. 11, 103–111 (2021). https://doi.org/10.18577/2307-6046-2021-0-11-103-111

  15. GOST R 57066–2016. Polymer composites. Method for determining the shear strength of an adhesive lap joint.

  16. GOST R 56753–2015. Determination of mechanical properties under dynamic loading. Part 11. Glass transition temperature.

  17. GOST R 57739–2017. Polymer composites. Determination of glass transition temperature by dynamic mechanical analysis.

  18. GOST 25271–93. Plastics. Liquid resins, emulsions or dispersions.

  19. A. N. Babin, M. A. Guseva, T. A. Grebeneva, and A. I. Tkachuk, “Study of the rheological and structural characteristics of epoxy binders modified with polyisocyanate,” Trudy VIAM, No. 1, 11 (2016). https://doi.org/10.18577/2307-6046-2016-0-1-90‑98

  20. A. N. Babin and M. A. Guseva, “Rheological method for studying the solubility of components in polymer compositions,” Vse materialy. Entsiklopediya. Spravochnik, No. 4, 67–70 (2016).

  21. A. N. Babin, M. A. Guseva, M. A. Khaskov, and A. I. Tkachuk, “A study of the process of combining epoxy oligomers with thermoplastic modifiers,” Mekhanika Kompozitnykh Materialov i Konstruktsii, No. 14, pp. 524–535 (2016).

Download references

ACKNOWLEDGMENTS

The work was carried out using the equipment of the Center for Collective Use “Climatic Tests” of the All-Russian Research Institute of Aviation Materials, National Research Center “Kurchatov Institute.”

Funding

This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular.

Author information

Authors and Affiliations

  1. All-Russian Research Institute of Aviation Materials, National Research Center “Kurchatov Institute”, 105005, Moscow, Russia

    K. N. Moskvitina, A. I. Tkachuk, K. A. Afanas’eva & Ya. M. Gurevich

Authors
  1. K. N. Moskvitina
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. A. I. Tkachuk
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. K. A. Afanas’eva
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Ya. M. Gurevich
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to A. I. Tkachuk.

Ethics declarations

The authors of this work declare that they have no conflicts of interest.

Additional information

Translated by Sh. Galyaltdinov

Publisher’s Note.

Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Moskvitina, K.N., Tkachuk, A.I., Afanas’eva, K.A. et al. Characteristics of Film Adhesive of VK-105 Brand Designed for Manufacture of Parts for Structural Purpose. Polym. Sci. Ser. D 17, 90–96 (2024). https://doi.org/10.1134/S1995421223700144

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S1995421223700144

Keywords:

Search

Navigation