Search

Search Results

1. Contact Angle Hysteresis on Solid Crystalline Surfaces

   Abstract

   The article presents the results of experimental studying the hysteresis of water contact angles at crystalline surfaces. Receding and...

   N. E. Esipova, S. V. Itskov, V. D. Sobolev in Colloid Journal

   Article 01 April 2023
   

2. Contact Angle Studies on Porous Silicon: Evidence for Heterogeneous Wetting and Implications of Oxidation

   A study of wetting was carried out on porous silicon films with pore diameters spanning three orders of magnitude. Water contact angle measurements...

   Stephen J. Spencer, Christopher G. Deacon, G. Todd Andrews in Silicon

   Article 21 April 2023

3. Influence of Micro- and Nanoporous Silicon Layers with Different Depth and Pore Morphology on Contact Angle, Adhesion and Viability of Cells

   The use of structured silicon substrates as model scaffolds is promising for the systematic study of the role of micro/nanomorphology in cell...

   Artem Iliasov, Vitaly Starkov, Ekaterina Gosteva in Silicon

   Article 21 January 2023

4. Temperature Dependence of Sessile Bubble Contact Angle at a Water–Silicon Interface

   Abstract

   The goal of this work is the experimental verification of a recently formulated thermodynamic theory of the temperature dependence of sessile...

   N. E. Esipova, A. I. Rusanov, V. D. Sobolev in Colloid Journal

   Article 29 September 2020
   

5. Improving the Mechanical Properties, Roughness, Thermal Stability, and Contact Angle of the Acrylic Polymer by Graphene and Carbon Fiber Do** for Waterproof Coatings

   A polymeric coating was enlarged by incorporating carbon-based nanofiller such as graphene (GR), graphene oxide, chopped carbon fibers (CF), etc.,...

   Tabarak M. Abbas, Seenaa I. Hussein in Journal of Inorganic and Organometallic Polymers and Materials

   Article 04 June 2022
   

6. Photothermal efficiency of carbon nanotubes-embedded polysulfone membranes for direct contact membrane distillation

   Membrane distillation (MD) is a highly promising method for desalinating water with high salt content. However, a major challenge faced by this...

   Ahmed M. Hameed, AbdulAziz A. Alayyafi, ... Mohamed E. A. Ali in Iranian Polymer Journal

   Article 31 May 2024
   

7. Effects of carrageenan and metal ions on porous contact lenses

   This study investigated the effects of carrageenan, a natural polysaccharide, and metal ions on the physical properties of porous contact lenses....

   Hye Ji Kim, Hyun Mee Lee in Macromolecular Research

   Article 24 October 2023
   

8. Optimization of Water-Repellent Finishing of Polyester/Viscose Fabric by Plasma Pretreatment Using Response Surface Methodology

   Water-repellent textiles, which resist water penetration while allowing breathability, are crucial in various industries, including clothing,...

   Mohammad Soltani Gerdefaramarzi, Saeed Fattahi, Aminoddin Haji in Fibers and Polymers

   Article 22 May 2024
   

9. Preparation of PVDF Microporous Membranes via Combining TIPS with Rolling Embossing for Water-in-Oil Emulsions Separation

   Superhydrophobic microporous membranes have great application prospects in oil–water separation. The stability of micro-rough structures on the...

   Qichao Sun, Zhensheng Yang, ... Lianying Wu in Korean Journal of Chemical Engineering

   Article 20 May 2024
   

10. Preparation of CCO@M-PP MB for Oil–Water Separation

    Polypropylene melt-blown nonwoven material (PP MB) was first modified by polydopamine to improve the surface hydrophilicity. Then cobalt...

    Yining Sun, Hui Sun, ... Tao Xu in Fibers and Polymers

    Article 12 January 2024
    

11. Preparation of superhydrophobic cellulose aerogel sponge from waste paper and its application in oil-water separation

    The separation of oil and water mixtures has become crucial globally due to the frequent incidents of petroleum substances and organic solvents...

    Soheil Bahraminia, Mansoor Anbia, Arezoo Mirzaei in Journal of Porous Materials

    Article 12 April 2024
    

12. Ionic liquid interactions with cellulose and the effect of water

    Ionic Liquids (ILs) have been used to address issues such as recyclability, cost-effectiveness, and tailored thermophysical properties. This is most...

    Rodrigo Kraemer T., Guillermo Reyes, ... Orlando J. Rojas in Cellulose

    Article Open access 02 July 2024
    

13. Effect of epoxy resin modifications with industrial fillers on wetting and water absorption

    Influence of the composition of the cold cured epoxy diane resin of ED-20 brand and its modifications on the water absorption and wetting properties...

    Sergey Savotchenko, Ekaterina Kovaleva, Aleksei Cherniakov in Colloid and Polymer Science

    Article 27 January 2023
    

14. Superhydrophilic and Oil-Resistant SiO₂/PU Fiber Membrane for Oil-In-Water Emulsion Separation under Gravity

    A polyurethane membrane with interlayer channels was developed through electrospinning to separate oily sewage. To enhance its hydrophilicity,...

    Li Gao, Haihong Gu, ... Chao Ye in Fibers and Polymers

    Article 03 April 2024
    

15. Study on a New System of Water Unlocking in Tight Sandstone Gas Reservoirs

    TIn order to solve the problem of water lock blockage in the wellbore of Daniudi gas field, the main surfactant APG and CG-1, CG-2, WR and other...

    **chang Wang, Dong Zhang, ... **angwei Kong in Chemistry and Technology of Fuels and Oils

    Article 01 January 2024
    

16. Exploring the Oil/Water Separation Efficiency of PU Foam Modified with Magnetic Graphene Oxide

    The removal of oil contaminants and heavy metals from contaminated water has recently become a huge necessity. Magnetic graphene oxide (rGO/Fe ₃ O ₄ )...

    Ayman Madbouly, Mohamed Morsy, Amir Elzwawy in Journal of Inorganic and Organometallic Polymers and Materials

    Article 29 January 2024
    

17. Baked hydrogel from palm starch and modified chitosan for water contaminant removal

    The present study synthesized baked hydrogels by crosslinking reactions from the sugar palm starch and modified chitosan using citric acid as a...

    Witta Kartika Restu, Rista Siti Mawarni, ... Harry Agusnar in Chemical Papers

    Article 14 January 2024
    

18. Multifunctional solar water harvester with high transport selectivity and fouling rejection capacity

    Shortage of clean water continues to grow around the world, and the recent solar-powered interfacial system has emerged as a sustainable, efficient...

    Xuanzhang Hao, Houze Yao, ... Liangti Qu in Nature Water

    Article Open access 30 October 2023
    

19. Food Contact Surfaces, Risk of Contamination, and Solution

    Food contact surfaces come in contact with raw, processed, and finished products while processing any food products. The incorrect material selection...

    Barinderjit Singh, Sahil Chaudhary, ... Rubrinder Singh Sandhu in Microbial Biotechnology in the Food Industry

    Chapter 2024
    

20. Oxidation Modification of Paraffin Wax and Preparation of Water-Repellent Finish Emulsion

    Applying a low surface energy water-repellent finish agents to fabric is one of the effective ways to make it obtain water-repellent function....

    Qifei Tan, Min Zhou, ... Yiren Chen in Fibers and Polymers

    Article 18 May 2024