Search
Search Results
-
Thickness dependence of high volumetric energy density lithium ion battery based on Sn–Zn eutectic alloy foil anode
Lithium ion batteries (LIBs) with high volumetric energy density and intrinsic safety features are highly desirable for portable electronics. Herein,...
-
Interface Characterization, Thermal and Mechanical Properties Evaluation of Cu, Zn, and Sn Interlayered Al5.2Si alloy-SS 304 Bimetallic Castings
Al-5.2Si is a wrought aluminium alloy having very strong corrosion resistance with high specific strength and good fluidity during casting process....
-
Porous metallic structures by de-alloying microcrystalline melt-spun ternary Zn70(Sn,Bi)30
A rapid solidification method (melt-spinning technique) was applied to produce a series of Zn 70 Sn 30 − x Bi x (x = 5,15,30) ribbons with homogeneous...
-
Study of the Structure and Properties of Rapidly Solidified Tin–Zinc Eutectic Alloys Doped with Antimony
Abstract—The phase composition, microstructure, and mechanical properties of rapidly solidified foils of Sn–Zn eutectic alloys doped with antimony...
-
Kinetic properties and electro-separation of U on binary liquid Ga–Al eutectic alloy cathode
The binary Ga–Al alloy cathode has been proven to be a prospective candidate for the separation of actinides over lanthanides (Lns) in the dry...
-
Influence of Microstructural Characteristics on the Mechanical and Wear Behavior of Wire Arc Additive Manufactured and Cast Eutectic Al-Si Alloy
The present study investigates the dry sliding wear behavior of Wire arc additive manufactured (WAAM) eutectic Al-Si alloy, with a particular focus...
-
Rare Earth and Critical Base Metals Electrodeposition Using Urea-Choline Chloride Ionic Liquids
The electrodepositionElectrodeposition of critical base metalsBase Metal and rare earthRare earth metals using a eutectic mixture of urea and choline...
-
Heat treatment Effect of Mg-5Sn-3Zn-1Mn Alloy with different Silicon addition
The Mg-5Sn-3Zn-1Mn alloy with varying silicon addition samples were casted as per the calculated weight percentage. The present work is to study and...
-
Study on electrodeposition and corrosion resistance of Cu-Sn alloy prepared in ChCl-EG deep eutectic solvent
The paper presents several experimental results regarding the electrodeposition of Cu-Sn alloy coatings prepared in ChCl-EG deep eutectic solvents...
-
Microstructure and Mechanical Behavior of Multidirectional Forge SIMA Process Al- Si Hypereutectic Alloy
During Strain Induced Melt Activation (SIMA) process, the mechanical and microstructural characteristics of the hypereutectic alloy having...
-
Enthalpies of mixing for alloys liquid below room temperature determined by oxidative solution calorimetry
Fusible alloys, in particular gallium-based alloys liquid below room temperature (Ga-LMA), have applications in soft robotics, microelectronics,...
-
Influence of Si Addition on the Microstructure and Mechanical Behaviour of Mg-5Sn-3Zn-1Mn Alloy
A new alloy Mg-5Sn-3Zn-1Mn-xSi (x = 0.5, 1, 1.5, 2wt %) with varied composition is investigated. Morphological behavior of as-cast Mg-5Sn is studied...
-
An Experimental Study on Microstructural, Mechanical and Machinability Properties of As-Cast and Heat-Treated Al-7Si-Mg Alloy
The automotive industry is constantly striving for targets for the development of lightweight materials for less fuel consumption and carbon...
-
Characteristics Study of Mechanical and Tribological Behaviour of Gr/Sn Dispersed Al-7Si Alloy Matrix Composite Processed Through Bottom Pouring Stir Casting Technique
The present study deals with the effect of the Gr, and Sn particulates in the mechanical and wear resistance of Al-7Si alloy based composites. The...
-
Microstructural, Mechanical and Wear Characteristics of Industrial Waste (Brass Slag) Reinforced LM30 Alloy-Based Composite
The present work explained the effect of brass slag reinforcement on the microstructural, mechanical and wear characteristics of Al-Si alloy (LM30)...
-
Effect of Multidirectional Forging and SIMA Process on Mechanical and Tribological Behavior of Hypereutectic Al-18 Wt.% Si Alloy
In the present work microstructure, mechanical and tribological characteristics of Al-18 wt.% Si alloy produced using the traditional gravity...
-
Possibility of Complete Collecting Eutectic Si and Primary Si as Purified Si During Al-Si Solvent Refining with Zr Additions
The possibility of complete collecting eutectic Si and primary Si as purified Si during Al-Si solvent refining with Zr additions has been studied....
-
Electrochemical separation of uranium from dysprosium on liquid Ga and liquid Cd electrodes in molten LiCl–KCl–CsCl eutectic at recycling of high-level waste
The equilibrium potentials of Me(III)/Me (Me = Dy, U) couples and the double Me–Ga, Me–Cd alloys vs. Cl − /Cl 2 reference electrode were measured at the...
-
Thermal conductance at Sn-0.5mass%Al solder alloy/substrate interface as a factor for tailoring cellular/dendritic growth
The use of Al for replacing high-cost alloying metals, like Ag, Bi, and Cu, as the second major element in Sn-based alloys, arises as a promising...
-
Study of the Effect of the Fractional Composition of a SiC Reinforcing Phase on Mechanical and Thermophysical Characteristics of a Metallic Composite Material Based on an Aluminum Al–Si Alloy
AbstractThis article presents the results of a study of the effect of a matrix alloy on the thermophysical characteristics of a metallic composite...
