Search
Search Results
-
Effect of Multipass FSP and (SiC + TiB2) Nanoparticles on the Mechanical and Metallurgical Characteristic of the Hybrid Metal Matrix Composite
In this work, a defect-free AA7050 (TiB 2 + SiC) hybrid surface composites was fabricated using multipass friction stir processing (MPFSP). The...
-
Effect of Multipass FSP on Si-rich TIG Welded Joint of Dissimilar Aluminum Alloys AA8011-H14 and AA5083-H321: EBSD and Microstructural Evolutions
In this analysis, friction stir processing (FSP) was applied to the Si rich TIG welded joint to study the influence of multi-pass FSP (MPFSP) on...
-
Influence of FSP Parameters on Wear and Microstructural Characterization of Dissimilar TIG Welded Joints with Si-rich Filler Metal
The welding process is used to join similar or dissimilar alloys, resulting in severe joint softening, uneven grain structure, and inevitable...
-
Phytochemical, phase transition, FTIR, and antimicrobial characterization of defatted Trigonella foenum graecum seed extract as affected by solvent polarity
This study focused on the fenugreek seed powder extract (FSP-Ex) obtained using four selected solvents based on polarity differences (acetone,...
-
Influence of heat assisted friction stir processing on the mechanical properties and cell viability in PLA/basalt/graphene nanocomposites
Polylactic acid (PLA) composites have been widely used in biomedical implants because of biocompatibility and improved mechanical properties. The aim...
-
Microstructure Study of Friction Stir Processed Hypereutectic Al-20Si Alloy and Analysis of the Wear Behaviour using Machine Learning Algorithms
Al–20Si alloy was subjected to friction stir processing to find its effect on the microstructure and wear behaviour. The microstructures of as-cast...
-
Exploring the Influence of SiC Particles on Temperature Variations, Microstructural Evolution, and Mechanical Characteristics in the Friction Stir Processing of AA6061-T6 Plates
This study investigates the temperature distribution behavior during friction stir Processing (FSP) of AA6061-T6 plates with varying SiC particle...
-
Utilization of Silicon Enriched Natural Halloysite Nano Tube: Mechanical, Tribological, and Corrosion Behaviour in Magnesium Matrix Composites
Natural tubular clay nanoparticles called halloysite nano tube (HNTs) are constructed of aluminosilicate kaolin sheets that have been repeatedly...
-
Influence of particle size on physical, mechanical, thermal, and morphological properties of tamarind- fenugreek mucilage biodegradable films
The preparation of biodegradable films using, tamarind seed powder (TSP) and fenugreek seed powder (FSP) has been reported herein. The tamarind seed...
-
Influence of Silicon Carbide on Microhardness and Corrosion Behavior of AZ91/SiC Surface Composites Processed through Friction Stir Processing: Multi-Response Optimization Using Taguchi-Grey Relational Analysis
Incorporating Silicon Carbides (SiC) particles as reinforcement has become a common practice to elevate surface properties and augment mechanical...
-
Effect of Dynamic Recrystallization Mode on Texture Components and Hardness for Nano-SiC Particles Reinforced Aluminum Matrix Composites Prepared Via Friction Stir Processing
Evolution of microstructure and texture in the stir zone (SZ), advancing side thermomechanically affected zone (AS-TMAZ), retreating side...
-
Investigation on Mechanical and Wear Properties of ZE43 Magnesium Composites Reinforced with Silicon Nitride by Friction Stir Processing
The primary objective of this work is to fabricate ZE43 magnesium surface composites using friction stir processing (FSP) with various volume...
-
Investigating the Effect of Multi-pass Friction Stir Processing of SiC Particles on Temperature Distribution, Microstructure and Mechanical Properties of AA6061-T6 Plate
In this paper, silicon carbide (SiC) particles were successfully inserted into AA6061-T6 aluminium matrix using multi-pass friction stir processing...
-
Pulp delignification and refining: impact on the supramolecular structure of softwood fibers
The effect on softwood fiber wall nanostructure of kraft cooking, oxygen delignification and refining was evaluated by X-ray scattering. A recently...
-
Fracture mechanisms and failure analysis of PA6/NBR/graphene nanocomposites by essential work of fracture
Polyamide 6 (PA6) is extensively used in many industrials due to its chemical and wear resistance, stiffness, excellent strength properties, low...
-
On the corrosion behavior and microstructural characterization of Al2024 and Al2024/Ti2SC MAX phase surface composite through friction stir processings
In this paper, aluminum composites reinforced by the Ti 2 SC MAX phase were fabricated through friction stir processing (FSP). The effects of FSP and...
-
Investigation on the Effects of Silicon Carbide and Cooling Medium during Multi-Pass FSP of Al-Mg/ SiC Surface Composites
In present work, friction stir processing (FSP) is utilized for fabrication of aluminium based metal matrix surface composites by incorporating...
-
Investigation on Mechanical and Tribological Characteristics Cu/Si3N4 Surface Composite Developed Through Friction Stir Processing
Copper surface composite are gaining attention in recent years because of its tailor made properties. The current work emphasized on characterization...
-
Improvement of Mechanical and Corrosion Properties of Al/SiC Functionally Graded Material Using a Novel Hybrid Tool in Friction Stir Processing
In the present investigation, Al-SiC functionally graded materials (FGM) were produced via. Friction stir processing (FSP) through a novel approach....