Search

Search Results

1. Thermal curing behavior of phenol formaldehyde resin-impregnated paper evaluated using DSC and dielectric analysis

   This research article discusses composite panel manufacturers’ challenges in finding an optimum pressing time to achieve a trade-off between the...

   Nitin Gupta, Arunjunai Raj Mahendran, ... Mohammed Khalifa in Journal of Thermal Analysis and Calorimetry

   Article 01 February 2024
   

2. A trifunctional active ester for curing DGEBA: synthesis, curing behavior, and properties of its cured product

   A trifunctional active ester curing agent, triacetoxytriphenylmethane (TATPM), which was dissolvable in diglycidyl ether of bisphenol A (DGEBA), was...

   An **ng, Chenchen Gao, ... Wantai Yang in Journal of Polymer Research

   Article 20 February 2024
   

3. Boron-containing Phthalonitrile Resin: Synthesis, Curing Behavior, and Thermal Properties

   A novel boron-containing monomer, (4-(3,4-dicyanophenoxy)phenyl)boronic acid (BPhPN) was synthesized and used to promote the curing process of...

   Shu-Yi Zhan, Yue Han, ... Tong Zhao in Chinese Journal of Polymer Science

   Article 18 June 2022

4. The hydration behavior of polymer-incorporated calcium aluminate cement mortars at different curing temperatures

   The potential degradation of calcium aluminate cement (CAC) concrete due to the conversion of thermodynamically metastable compounds into stable...

   Maria Idrees, Ozgur Ekincioglu, Muhammad Sarmad Sonyal in Journal of Thermal Analysis and Calorimetry

   Article 10 October 2022
   

5. Nanofiller Effects on the Isothermal Curing Kinetics of Epoxy Resin

   Abstract

   This study aims to optimize curing conditions and delays the curing time by mixing nanoparticles of different sizes and types in commercially...

   G. Kabakçı, M. Kılınçel, G. B. Tezel in Theoretical Foundations of Chemical Engineering

   Article 01 December 2023
   

6. Study the Process of Siloxane Curing by Experimental and Numerical Simulation

   Abstract

   Curing process of siloxane polymer was studied by determining rate of heat released during Dynamic DSC analysis. Utilizing thermokinetics...

   F. Nazari, S. Tavangar Roosta, ... H. Moghimi Rad in Theoretical Foundations of Chemical Engineering

   Article 01 December 2023
   

7. A Novel Rare Earth Enhanced Epoxy Composites: Mechanical Properties, Thermal Stability and Curing Kinetics

   Abstract

   The curing kinetics of the epoxy resin/nano rare earth oxides system were studied by non-isothermal differential scanning calorimetry. Curing...

   Junwei Li, Wenxue Lu, ... Yongke Zhao in Polymer Science, Series B

   Article 02 July 2024
   

8. Study on curing kinetics of epoxy system and DFT simulation

   Epoxy asphalt has emerged as a high-performance pavement material. However, research on its curing mechanism and kinetics remains limited. This study...

   Fenglei Zhang, Lei Zhang, ... Kai Huang in Journal of Thermal Analysis and Calorimetry

   Article 12 August 2023
   

9. Non-isothermal Curing Kinetics of Isosorbide Based on Epoxy with Anhydrides

   Diglycidil ether of isosorbide (DGEISO), a potential biobased substitute for petro-based epoxy resin, such as to diglycidil ether of bisphenol A...

   Nichollas Guimarães Jaques, Pedro Henrique Medeiros Nicácio, Renate Maria Ramos Wellen in Journal of Polymers and the Environment

   Article 29 November 2023
   

10. Enhancement of Biobased Epoxy Through the Curing and Thermal Stability Control with Carboxylic Acids

    Epoxy thermosets, sourced from plant oils and compatible curing agents, have emerged as environmentally friendly alternatives to fossil-based...

    Ana Barros, Neymara Nepomuceno, ... Renate Wellen in Journal of Polymers and the Environment

    Article 06 December 2023
    

11. A piecewise kinetic model consistent with curing cycle of epoxy/amine composite

    Curing kinetic model is a crucial basis for the processing analysis and simulation of resin matrix composites. The existing dynamic and isothermal...

    Linhai Zhang, **fa Feng, ... Feng Feng in Journal of Thermal Analysis and Calorimetry

    Article 06 October 2023
    

12. The Influence of the Content of Halogen-Containing Oligomer in the Composition of VSK-14-6 Adhesive Binder on the Kinetics of the Curing Process of Prepregs on Different Fillers and a Comparative Analysis of the Curing Kinetics of Prepregs Based on VSK-14-1 Adhesive Binder

    Abstract

    Using the differential scanning calorimetry method, the influence of the halogen-containing oligomer in the composition of VSK-14-6 adhesive...

    N. V. Antyufeeva, A. I. Starkov in Polymer Science, Series D

    Article 24 December 2023
    

13. Comparative experiments on amine vs. acid anhydride curing agents for epoxy resin required for automotive parts

    A high-pressure resin transfer molding injector has a limitation in that it can use only one type of curing agent—an amine or an acid anhydride...

    Manseok Yoon, Choong-Sun Lim in Journal of Polymer Research

    Article 05 December 2022
    

14. Effect of Curing Process on Tensile and Flexural Properties of 3D Woven Structural Polymer Composites

    The unstable meso-structure of preform affects the mechanical properties of 3D angle-interlock woven composites, which restricts the application in...

    Zhenyu Ma, Ruidong Man, ... Chenhui Jia in Fibers and Polymers

    Article 27 June 2023
    

15. Fabrication of microcapsule particles by electrospray and their use as latent curing agent for epoxy resin

    The epoxy–imidazole resin is a component to form an anisotropic conducting film for use in the printed circuit board (PCB), LCD modules, which...

    Chung Thi Kim Nguyen, Hung Hai Nguyen, ... Hieu Trung Bui in Iranian Polymer Journal

    Article 14 July 2023
    

16. Thermal curing kinetics of urea-formaldehyde resin modified by hydroxyapatite

    In this study, hydroxyapatite (HA) was surface modified with silane coupling agent. The modified HA was named HA-APTES, and its structure was...

    Kexin Chen, Wenyu Zheng, ... Hui **ao in Journal of Thermal Analysis and Calorimetry

    Article 02 December 2023
    

17. Simultaneous Analysis of Formaldehyde and Methanol Emissions During Curing Reactions of Polyester-melamine Coatings

    This paper introduces a new derivatization agent for the simultaneous quantification of formaldehyde and methanol during curing reactions of complex...

    Elias Rippatha, Clemens Schwarzinger in Chromatographia

    Article Open access 03 April 2024
    

18. The Effect of Curing and Post-curing Processes on Physical and Mechanical Behaviors of Jute Fabric Reinforced AESO/Epoxy Based Bio-composites

    Today, depending on the interest in finding ways to reduce dependence on fossil raw materials, the search for alternative bio-based materials to...

    Semih Ozkur, Hande Sezgin, Ipek Yalcin-Enis in Fibers and Polymers

    Article 11 April 2022

19. Mechanical properties and curing kinetics of bio-based benzoxazine–epoxy copolymer for dental fiber post

    Biocopolymers based on vanillin/fufurylamine–biobenzoxazine (V-fa) and epoxide castor oil (ECO), a bioepoxy, were prepared for application as dental...

    Phattarin Mora, Sarawut Rimdusit, ... Chanchira Jubsilp in Bioresources and Bioprocessing

    Article Open access 16 September 2023
    

20. The Preparation of a Novel Moisture-Curing Silicone Conformal Coating

    In this research, high molecular weight hydroxyl-terminated polydimethylsiloxane (PDMS-OH) was successfully synthesized through a hydroxyl...

    Zhaoqun Pan, Min Zhong, Liangwei Lin in Silicon

    Article 02 July 2024