Skip to main content

11 Result(s)

within Ze-Ming Yuan Remove this filter Materials Engineering Remove this filter

and

  1. No Access

    Article

    Development and Application of Hydrogen Storage

    Hydrogen, as a secure, clean, efficient, and available energy source, will be successfully applied to reduce and eliminate greenhouse gas emissions. Hydrogen storage technology, which is one of the key challen...

    Yang-huan Zhang, Zhi-chao Jia, Ze-ming Yuan… in Journal of Iron and Steel Research Interna… (2015)

  2. No Access

    Article

    Structure and electrochemical properties of LaMgNi4−x Co x (x = 0–0.8) hydrogen storage electrode alloys

    LaMgNi4−x Co x (x = 0–0.8) electrode alloys used for MH/Ni batteries were prepared by induction melting. The structures and electrochemical hydrogen storage prop...

    Tai Yang, Ting-Ting Zhai, Ze-Ming Yuan, Wen-Gang Bu, Yan Qi, Yang-Huan Zhang in Rare Metals (2018)

  3. No Access

    Article

    Microstructure and hydrogen storage properties of Mg-based Mg85Zn5Ni10 alloy powders

    Mg85Zn5Ni10 ternary alloy was synthesized through vacuum induction melting for the first time. Phase compositions and microstructures of Mg85Zn5Ni10 alloy powders were analyzed by X-ray diffraction (XRD) and scan...

    Yi Yin, Bo Li, Ze-ming Yuan, Yan Qi… in Journal of Iron and Steel Research Interna… (2018)

  4. No Access

    Article

    Improved hydrogen storage performance of as-milled Sm–Mg–Ni alloy by adding CeO2

    To investigate the influence of adding CeO2 on the hydrogen storage characteristics of Sm–Mg–Ni-based SmMg11Ni-type alloy, mechanical milling was utilized to synthesize SmMg11Ni and SmMg11Ni + 5 wt.% CeO2 (named ...

    Yang-huan Zhang, Kai-feng Zhang… in Journal of Iron and Steel Research Interna… (2018)

  5. No Access

    Article

    Hydrogen storage properties of La1−xPrxMgNi3.6Co0.4 (x = 0–0.4) alloys with annealing treatment

    The as-cast RE–Mg–Ni-based AB2-type La1−xPrxMgNi3.6Co0.4 (x = 0–0.4) alloys were prepared by vacuum induction melting followed by annealing treatment. The phase composition and structure were characterized by X-r...

    Ting-Ting Zhai, Sheng Xu, Tai Yang, Ze-Ming Yuan, Yang-Huan Zhang in Rare Metals (2019)

  6. No Access

    Article

    Influence of melt spinning and annealing treatment on structures and hydrogen storage thermodynamic properties of La0.8Pr0.2MgNi3.6Co0.4 alloy

    La0.8Pr0.2MgNi3.6Co0.4 alloys were prepared by induction melting, annealing and melt spinning techniques. The influences of annealing treatment and melt spinning on phase structure and hydrogen storage properties...

    Ting-ting Zhai, Ze-ming Yuan, Feng Hu… in Journal of Iron and Steel Research Interna… (2020)

  7. No Access

    Article

    Influence of annealing on microstructure and hydrogen storage properties of V48Fe12Ti15Cr25 alloy

    V48Fe12Ti15Cr25 alloy was prepared using vacuum arc melting and was subsequently annealed for 10 h at 1273 K. The effects of annealing on the hydrogen storage properties and microstructure of the V48Fe12Ti15Cr25 ...

    Long Luo, Xuan Bian, Wen-yuan Wu… in Journal of Iron and Steel Research Interna… (2020)

  8. No Access

    Article

    Electrochemical hydrogen storage behaviors of as-cast and spun RE–Mg–Ni–Co–Al-based AB2-type alloys applied to Ni–MH battery

    Preparation of La–Mg–Ni–Co–Al-based AB2-type alloys La0.8−xCe0.2YxMgNi3.4Co0.4Al0.1 (x = 0, 0.05, 0.10, 0.15, 0.20) was performed using melt spinning technology. The influences of spun rate and Y content on struc...

    Yang-Huan Zhang, Gang Huang, Ze-Ming Yuan, Shi-Hai Guo, Yan Qi… in Rare Metals (2020)

  9. No Access

    Article

    Structure and electrochemical hydrogen storage characteristics of nanocrystalline and amorphous MgNi-type alloy synthesized by mechanical milling

    Both element substitution and surface modification were utilized to enhance the electrochemical performances of Mg–Ni-based alloys. Nanocrystalline and amorphous Mg1−xCexNi0.9Al0.1 (x = 0–0.08) + 50 wt.% Ni hydro...

    Yang-huan Zhang, Wei Zhang, Ze-ming Yuan… in Journal of Iron and Steel Research Interna… (2020)

  10. No Access

    Article

    Structure and electrochemical characteristics of Mg–Ti–Ni-based electrode alloys synthesized by mechanical milling

    The vacuum induction melting was adopted to fabricating Mg50−xTixNi45Al3Co2 (x = 0, 1, 2, 3, 4 at.%) composites protected by the high-purity helium atmosphere. Subsequently, the surface modification treatment of ...

    Zhong-hui Hou, **n Wei, Wei Zhang… in Journal of Iron and Steel Research Interna… (2021)

  11. No Access

    Article

    Research progress of TiFe-based hydrogen storage alloys

    After being activated, TiFe alloys are widely concerned for their high hydrogen storage density due to their large reversible absorption and desorption capacity of hydrogen at room temperature, low price, abun...

    Yang-huan Zhang, Chen Li, Ze-ming Yuan… in Journal of Iron and Steel Research Interna… (2022)