![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
204 Result(s)
-
Article
Numerical Simulation of In Situ Reaction Synthesis of TiC-Reinforced Steels from Elemental Fe-Ti-C Powders
This research presents a study of the thermal synthesis of titanium carbide (TiC) within the Fe-Ti-C system, utilizing a physically grounded semi-empirical mathematical model. The model enables estimation of T...
-
Article
Correction: Microstructures and Mechanical Behaviors of Ni-Based Single-Crystal Superalloy DD90 Joints Brazed with a Co-Based Interlayer
-
Article
Microstructures and Mechanical Behaviors of Ni-Based Single-Crystal Superalloy DD90 Joints Brazed with a Co-Based Interlayer
A third-generation nickel-based single-crystal superalloy, DD90, was brazed with a Co-based filler alloy under vacuum conditions. The microstructural evolution of the joints brazed with different processing pa...
-
Article
Study of Structural-Phase Transformations and Kinetics of Decomposition of Supersaturated Solid Solution of Fire-Resistant Magnesium Alloy VML26
The results of a study of structural-phase transformations and kinetics of decomposition of supersaturated solid solution that occur during heat treatment (aging) of a new-generation magnesium alloy with an el...
-
Article
Numerical Simulation of In Situ Reaction Synthesis of TiC Reinforced Aluminum Matrix Composite from Elemental Al-Ti-C Powders
Thermodynamic equilibria in the Al-Ti-C ternary system are considered as applied to synthesizing titanium carbides in an aluminum medium using the CALPHAD method. A set of calculated isothermal sections of the...
-
Article
Effect of Grain Boundary Engineering on the Work Hardening Behavior of AL6XN Super-Austenitic Stainless Steel
To examine the influence of grain boundary engineering (GBE) on the work hardening behavior, the tensile tests were carried out on the non-GBE and GBE AL6XN super-austenitic stainless steel (ASS) samples with ...
-
Article
Effects of Brazing Temperature on Microstructure and High-Temperature Strength of Joints Using a Novel Fourth-Generation Nickel-Based Single Crystal Superalloy
A novel fourth-generation nickel-based single crystal superalloy was bonded by vacuum brazing at 1230 °C, 1260 °C and 1290 °C for 60 min using a new type of Co-based filler alloy. The effects of the brazing te...
-
Article
Effect of Heat-Treatment Conditions on the Structure and Properties of a Fireproof Cast Magnesium Alloy of the Mg–REM–Zr System
The results of development of a next-generation Mg–REM–Zr fireproof cast magnesium alloy are presented. Commercially available magnesium alloys do not have a high strength at room temperature and a sufficient ...
-
Article
Study on the Calculation Method of Correlation Length of Power Spectral Density Function of Two-Phase Flow in Heat Transfer Tube of Steam Generator
In nuclear reactors, turbulent excitation is an essential mechanism of flow-induced vibration. Turbulence exists everywhere in the heat transfer tubes, fuel rods and valves. Among three main research methods f...
-
Chapter
Dynamic Compressive Behavior of Shear Thickening Fluid Based Composites
In this study, the dynamic behavior of shear thickening fluid (STF) and its composites are investigated. First, the dynamic shock response and compressive behavior of STF are studied. The results demonstrated ...
-
Article
Study on Foreign Object Damage Law of Titanium Alloy Blade of an Aero-Engine Impacted by Sandstone
Using ANSYS/LS-DYNA software and plastic follow-up hardening constitutive model, a simulation model of foreign object impact damage of the first stage TC4 titanium alloy rotor blade of an aero-engine low-press...
-
Chapter
Recent Applications of Microfluidics in Bionanotechnology
systems provide many advantages for biological studies, such as rapid and precise control of the cellular microenvironment, multiplexed analysis and integration of multiple experimental steps on a single plat...
-
Article
Numerical study of thermal effect in silicone rubber filled with carbonyl iron powder under microwave radiation
Thermal effect in absorbing composite is concerned gradually due to electromagnetic environment tends to high power, high frequency and wide bandwidth. Microstructure characteristics and some basic material pr...
-
Article
Enhanced Corrosion Resistance of an Alumina-forming Austenitic Steel Against Molten Al
The development of corrosion resistant steel for molten Al has always attracted the interests from die casting industry for several decades. In this paper, we reported the enhanced corrosion resistance in 750 ...
-
Article
An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission
As a non-destructive technique, Acoustic emission (AE) can be employed to detect the damage inside the material passively and then locate the damage source. However, fatigue loading poses challenges to AE sign...
-
Article
Foreign Object Damage Effect on the Fatigue Strength of Ti–6Al–4V Specimens
The fatigue strength deterioration in Ti–6Al–4V specimens impacted by steel sphere was experimentally investigated. Based on the test data of Peterson’s formula and the fatigue notch factor, the relationships ...
-
Article
Cavitation Erosion and Corrosion Behavior of NiTi Cladding with Cu and Nb Interlayers
Cavitation erosion resistance of NiTi claddings by tungsten inert gas with/without Cu, Nb and Cu + Nb interlayers was investigated. The NiTi-TIG and NiTi-Nb-TIG claddings cannot resist the cavitation erosion d...
-
Article
Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates Under Different Loading Rates Using Acoustic Emission
This work studies delamination behaviors of carbon fiber/epoxy composite laminates under different loading rates using acoustic emission (AE) that shows large advantage for dynamic monitoring of instantaneous ...
-
Article
Experimental investigation of phase equilibria in the Al–Ni–Sc system
Phase equilibria in Al–Ni–Sc ternary system have been measured through alloy sampling. According to the results from electron probe microanalysis and X-ray diffraction techniques, isothermal sections of Al–Ni–...
-
Article
New Universal Flaky Flux for Cast Magnesium Alloys
The composition and the process of production of the fluxes that are used for melting magnesium alloys are corrected. A universal flaky flux, which is based on domestic raw materials and is being developed in ...