Skip to main content

16 Result(s)

within Yu. A. Pak Remove this filter

and

  1. No Access

    Article

    Converter smelting of steel with preliminary scrap heating to reduce hot-metal consumption

    The consumption of hot metal in slag preparation and slag-coating application in the converter may be reduced by scrap heating. The thermal equivalents of the coke additions and coke consumption in smelting to...

    Yu. A. Pak, G. A. Filippov, M. V. Glukhikh in Steel in Translation (2016)

  2. No Access

    Article

    Two-Strand Tundish with Chambers for Plasma Heating of Liquid Metal

    An improved design of tundish which has chambers for the plasma heating of liquid steel has been developed and tested. The design of the tundish improves heat and mass transfer processes inside it. The new des...

    Yu. A. Pak, G. A. Filippov, D. I. Yusupov, A. S. Tyuftyaev… in Metallurgist (2014)

  3. No Access

    Article

    Influence of steel temperature in continuous casting on its structure and properties

    The macrostructure, mechanical properties, and defect distribution in steel are investigated as a function of its temperature in the tundish of the continuous-casting machine. In casting, the steel temperature...

    E. Kh. Isakaev, A. S. Tyuftyaev, V. B. Mordynskii, G. A. Filippov… in Steel in Translation (2014)

  4. No Access

    Article

    New continuous-casting equipment

    New equipment for plasma heating of steel in the intermediate ladle is discussed. Experiments have been conducted on continuous-casting machine 4 at OAO Magnitogorskii Metallurgicheskii Kombinat, in collaborat...

    Yu. A. Pak, D. V. Rabadzhi, T. S. Masal’skii, A. V. Filippov… in Steel in Translation (2012)

  5. No Access

    Article

    Effect of additions on the production cost of steel and the cost-effectiveness of converter steelmaking

    This article examines the effect of additional blowing on performance indices and production costs for the production of steel in the converter shop at the Chelyabinsk Metallurgical Combine. It is shown that d...

    Yu. A. Pak, E. Kh. Shakhpazov, G. A. Filippov, A. G. Levada, E. Yu. Vaganov in Metallurgist (2011)

  6. No Access

    Article

    Effect of carbon content and stressed state on the corrosion rate of pipe steel in heating systems

    An increase in the carbon content of steel increases the corrosion rate. Comparative corrosion tests for specimens without prior deformation and in a stressed state shows that deformation leads to an increase ...

    V. G. Pleshivtsev, G. A. Filippov, Yu. A. Pak, O. V. Livanova in Metallurgist (2009)

  7. No Access

    Article

    Energy- and resource-saving technology for performing hydraulic tests on the pipes of large central heating systems

    A new energy-saving, low-waste technology is proposed for conducting hydraulic tests. The technology was developed with consideration of the processes that take place in the metal of pi** that has undergone ...

    V. G. Pleshivtsev, I. P. Pulner, Yu. A. Pak, O. V. Livanova, G. A. Filippov… in Metallurgist (2009)

  8. No Access

    Article

    Influence of hydraulic tests and the temperature of hot water on the properties of pipe metal

    V. G. Pleshivtsev, Yu. A. Pak, G. A. Filippov, A. A. Burzhanov… in Steel in Translation (2007)

  9. No Access

    Article

    Efficiency of the Conversion of Low-Silicon Pig Iron with a Low Manganese Content in Oxygen Converters

    A technology – the first of its kind in oxygen converter steelmaking – has been developed to make steel from low-silicon, low-manganese pig iron in 350-ton converters. Results are presented from a study of the...

    R. S. Aizatulov, Yu. A. Pak, V. V. Sokolov, A. B. Yur'ev, V. A. Buimov… in Metallurgist (2002)

  10. No Access

    Article

    Conversion of High-Phosphorus Low-Silicon Pig Iron with Scrap Preheating in Oxygen Converters

    R. S. Aizatulov, Yu. A. Pak, V. V. Sokolov, V. A. Buimov, A. V. Amelin… in Metallurgist (2001)

  11. No Access

    Article

    Use of Low-Silicon High-Phosphorus Pig Iron in Converter Steelmaking

    R. S. Aizatulov, Yu. A. Pak, V. V. Sokolov, V. A. Buimov, A. V. Amelin… in Metallurgist (2001)

  12. No Access

    Article

    Effect of corrective actions on the production indices and cost of converter steel

    R. S. Aizatulov, Yu. A. Pak, V. V. Sokolov, V. A. Buimov, M. V. Glukhikh in Metallurgist (2000)

  13. No Access

    Article

    Converter steel production with the use of fluoritized limestone and a combination blow

    Yu. A. Pak, V. S. Kolpakov, V. D. Kuleshov, A. K. Smirnov in Metallurgist (1989)

  14. No Access

    Article

    Crystalline structure of (Ti, Mo)C phase

    A. M. Bogomolov, G. T. Dzodziev… in Soviet Powder Metallurgy and Metal Ceramics (1988)

  15. No Access

    Article

    Refining low-manganese pig irons in the converter with a prepared slag

    P. I. Yugov, Yu. A. Pak, E. N. Ivashina in Metallurgist (1978)

  16. No Access

    Article

    Technological principles of blowing metal in a converter

    P. I. Yugov, Yu. A. Pak, E. Kh. Shakhpazov, E. M. Vorozhtsova… in Metallurgist (1978)