-
Article
Development and Prospect of Arsenic Removal Technology for Containing Arsenic Copper Minerals
Arsenic is a harmful element that widely exists in various non-ferrous metal minerals including copper. With the depletion of free and low arsenic copper ores, containing arsenic copper ore has become an impor...
-
Article
Open AccessNumerical spectra of the Laplacian for line bundles on Calabi-Yau hypersurfaces
We give the first numerical calculation of the spectrum of the Laplacian acting on bundle-valued forms on a Calabi-Yau three-fold. Specifically, we show how to compute the approximate eigenvalues and eigenmode...
-
Article
Investigation of Fatigue Small Crack Propagation Behavior in Superalloy FGH96 under Different Stress Ratios
The characteristic analysis of fatigue small crack propagation behavior of superalloy FGH96 in a plane stress state was carried out based on a series of in situ scanning electron microscope fatigue tests. The ...
-
Chapter and Conference Paper
Configuration Design and Discrete Optimization of Large Rotatable Parabolic Cylindrical Antenna
In order to solve the problem of performance degradation of large rotatable parabolic cylinder antenna due to excessive weight, a new optimization design method is proposed in this paper, which can reduce the ...
-
Chapter and Conference Paper
Design of a Cable Driving System in Large Rotatable Cylindrical Antenna
With the development of high-tech systems such as aerospace, communications, and navigation, as well as the increasing demand for astronomical observations, the demand for antenna apertures is also increasing,...
-
Chapter and Conference Paper
A Feasibility-Evaluation Method on Antenna Driving Scheme Based on MBSE
In response to the difficulties of traditional antenna collaborative design, high cost of solutions evaluation and ambiguous indexes relationship, we proposed the model-driven system scheme feasibility evalua...
-
Article
Influence of Microstructure Evolution on Mechanical Properties, Wear Resistance and Corrosion Resistance of Ti(C,N)-Based Cermet Tools with Various WC Additions
The effects of tungsten carbide addition on the microstructure, mechanical properties and corrosion resistance of Ti(C,N)-based cermets prepared by the sinter-HIP method are investigated through scanning elect...
-
Article
MiR-130b/TNF-α/NF-κB/VEGFA loop inhibits prostate cancer angiogenesis
Angiogenesis is a critical biological process essential for solid cancer growth and metastasis. It has been shown that microRNAs (miRNAs) play a vital role in a variety of biological processes in cancers. Howe...
-
Article
Influence of Micron WC Addition on the Microstructure and Mechanical Properties of Ultrafine WC–Co Cemented Carbides at the Elevated Temperature
In this paper, the influence of micron-grained WC additions with the different grain sizes on the microstructure and hardness of ultrafine WC–Co cemented carbides at the elevated temperature were investigated ...
-
Article
Reduced prostate cancer risk with green tea and epigallocatechin 3-gallate intake among Hong Kong Chinese men
In vitro and in vivo studies suggested that polyphenol epigallocatechin 3-gallate (EGCG) in tea may have anti-carcinogenic effect on prostate cells, but this protective effect has less been examined in epidemiolo...
-
Article
Histological analysis of somatic embryogenesis in pineapple: AcSERK1 and its expression validation under stress conditions
Somatic embryogenesis receptor-like kinase (SERK) is a small gene family found in plants. SERK is involved in somatic embryogenesis and can be found in various important signal transduction pathways. Research on
-
Article
Preparation and Pore Structure Stability at High Temperature of Porous Fe-Al Intermetallics
Porous Fe-Al intermetallics with different nominal compositions (from Fe-8 wt.% Al to Fe-50 wt.% Al) were fabricated by Fe and Al elemental powders through reaction synthesis. The effects of the Al content on ...
-
Article
The Influence of Microstructure on Superplastic Behaviours of γ-TiAl Alloys
In this work, superplastic behaviours in Ti-33Al-3Cr-0.5Mo (wt%) γ-TiAl alloys with two different initial microstructures of near gamma (NG) and duplex (DM) structure were investigated with respect to the effe...
-
Article
In vitro degradation and cell attachment of a PLGA coated biodegradable Mg–6Zn based alloy
Currently available engineering magnesium alloys have several critical concerns if they are about to be used as biomaterials, particularly the concern about the toxicity of the common alloying elements such as...
-
Article
In vivo quantification of propylene glycol, glucose and glycerol diffusion in human skin with optical coherence tomography
The purpose of study is to quantify and compare diffusion of propylene glycol, glucose, glycerol in the human skin in vivo noninvasively. Optical coherence tomography (OCT) was utilized in the functional imagi...
-
Article
Synthesis and characterization of porous Fe–25 wt.% Al alloy with controllable pore structure
Porous Fe–25 wt.% Al alloy is synthesized by reactive synthesis with Fe and Al powders as the raw materials. Various processing parameters such as the final sintering temperature, pressure during cold pressing...
-
Article
A density-functional study of aluminium, iron, zirconium and cerium microclusters
The geometries and electronic structural properties of AB and ABC (A, B, C = Al, Fe, Zr, Ce) microclusters have been systematically investigated by using a hybrid density-functional method (B3LYP) approach. Th...
-
Article
Structural characteristics and high-temperature oxidation behavior of porous Fe–40 at.%Al alloy
Porous FeAl alloy was prepared by Fe and Al elemental reaction synthesis. The cyclic oxidation evolutions of porous Fe–40 at.%Al alloy at the elevated temperatures of 600 and 800 °C in air were studied and com...
-
Article
Study on Health Effects of Disassembling Imported Electrical Equipment
-
Article
Infrared imaging during low-cycle fatigue of HR-120 alloy