33 Result(s)

Article

Correction to: Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells

Mengting Zhang, Chen Song, Kaisheng Lin, Min Liu… in Journal of Thermal Spray Technology (2024)

Article

Comparison of Creep Mechanisms Between Co-Al-W- and CoNi-Based Single Crystal Superalloys at Low Temperature and High Stresses

TO further understand the creep performance of γ′-strengthened Co-based superalloys at low temperatures, the creep behaviors and mechanisms of a Co-Al-W-based and a CoNi-based single crystal superalloys (alloy...

Song Lu, Zhuoer Luo, Longfei Li, Qiang Feng in Metallurgical and Materials Transactions A (2023)

Article

First-Principles Calculations of Elastic and Thermodynamic Properties for Multi-component Co-based Superalloys

First-principles calculations were performed to investigate the elastic and thermodynamic properties for multi-component Co-based superalloy systems and explored the effect of alloying on stabilizing the γ′ phase...

Yingchun Tang, Wei Li, Changle Li, Song Lu… in Metallurgical and Materials Transactions A (2023)

Article

Comparing Relative Bond Characteristics Between Spherical and Elongated Morphologies for Cold Spray Process Using SPH Simulation

Under cold spray conditions, the modified Johnson–Cook model was adopted to perform single and multiple particle simulation for spherical and elongated aluminum alloy- Al-6061 feedstock particles. The splat fo...

Wesley Kean Wah Tai, Rohan Chakrabarty… in Journal of Thermal Spray Technology (2022)

Article

Peridynamic Simulation of Particles Impact and Interfacial Bonding in Cold Spray Process

Cold spray has recently emerged as a promising new technology for various coating, additive manufacturing, and on-site repair needs. One key challenge underlying cold spray is the proper simulation of the depo...

Baihua Ren, Jun Song in Journal of Thermal Spray Technology (2022)

Article

A soft gripper with contamination resistance and large friction coefficient

With the development of soft gripper systems, food processing, packaging, and processing technology has seen a significant advancement. The soft gripper must be protected from surface contamination and liquid ...

Zuodong Wang, Yali Wu, Jiayi Yang, Honglie Song, Khuong Ba Dinh… in Applied Physics A (2022)

Article

CFD Modeling of Multiphase Flow in an SKS Furnace with New Tuyere Arrangements

There has been a great deal of focus on the optimization of tuyere arrangements in SKS bottom blown copper smelting furnaces since the last decade, as the improved furnace operation efficiency of SKS technolog...

Kezhou Song, Ari Jokilaakso in Metallurgical and Materials Transactions B (2022)

Article

Fabrication of Porous Aluminum Coating by Cored Wire Arc Spray for Anchoring Antifouling Hydrogel Layer

Biofouling has been persisting as a worldwide problem due to the difficulties in finding efficient environment-friendly antifouling coatings for long-term applications. Develo** novel coatings with desired a...

Jianxin Wen, Ziheng Song, **uyong Chen, Hua Li in Journal of Thermal Spray Technology (2022)

Article

CFD Modeling of Multiphase Flow in an SKS Furnace: The Effect of Tuyere Arrangements

The emerging bottom blown copper smelting (SKS) technology has attracted growing interest since it came into production. To further reveal the agitation behavior inside the bath and optimize the variable param...

Kezhou Song, Ari Jokilaakso in Metallurgical and Materials Transactions B (2021)

Article

Multiphase-field simulation of austenite reversion in medium-Mn steels

Medium-Mn steels have attracted immense attention for automotive applications owing to their outstanding combination of high strength and superior ductility. This steel class is generally characterized by an u...

Yan Ma, Rui Zheng, Ziyuan Gao, Ulrich Krupp… in International Journal of Minerals, Metallu… (2021)

Article

Modeling Viscosity of High Titania Slag

TiO₂-FeO-Ti₂O₃ slag system is the dominant system for industrial high-titania slag production. In the present work, viscosities of TiO₂-FeO and TiO₂-FeO-Ti₂O₃ systems were experimentally determined using the conc...

Kai Hu, Kai Tang, Xuewei Lv, Jafar Safarian… in Metallurgical and Materials Transactions B (2021)

Article

Editorial for special issue on high-temperature molten salt chemistry and technology

Shu-qiang Jiao, Ming-yong Wang, Wei-li Song in International Journal of Minerals, Metallu… (2020)

Article

Correction to: Preparation of MCrAlY–Al₂O₃ Composite Coatings with Enhanced Oxidation Resistance Through a Novel Powder Manufacturing Process

In the Results section, under As-sprayed Composite Coatings, in the first paragraph, there is a correction to “which is approximately 3–5 μm for MCrAlY.”

Mingwen Bai, Bo Song, Liam Reddy, Tanvir Hussain in Journal of Thermal Spray Technology (2020)

Article

Correction to: Effect of Dry-Ice Blasting on Structure and Magnetic Properties of Plasma-Sprayed Fe-40Al Coating from Nanostructured Powders

The authors erroneously omitted.

Bo Song, Shujuan Dong, Bernard Hansz, Hanlin Liao… in Journal of Thermal Spray Technology (2019)

Article

Correction to: Formation Mechanisms and Leachability of Hexavalent Chromium in Cr₂O₃-Containing Refractory Castables of Electric Arc Furnace Cover

Due to an error introduced during the production process, the corresponding author’s e-mail address was incorrect. It should have read: songs@wust.edu.cn.

Yingjiang Wu, Shengqiang Song, Zhengliang Xue… in Metallurgical and Materials Transactions B (2019)

Article

Correction to: Effect of Sr²⁺ do** on the preparation and properties of γ-Ce₂S₃ red pigment

The author found a spelling mistake in author information.

YueMing Li, Qi Liu, FuSheng Song, ZhuMei Wang, ZongYang Shen… in Applied Physics A (2019)

Article

Preparation of MCrAlY–Al₂O₃ Composite Coatings with Enhanced Oxidation Resistance through a Novel Powder Manufacturing Process

MCrAlY–Al₂O₃ composite coatings were prepared by high-velocity oxygen fuel thermal spraying with bespoke composite powder feedstock for high-temperature applications. Powder processing via a suspension route was ...

Mingwen Bai, Bo Song, Liam Reddy, Tanvir Hussain in Journal of Thermal Spray Technology (2019)

Article

An ICME Framework for Incorporating Bulk Residual Stresses in Rotor Component Design

Integrated Computational Materials Engineering (ICME) is an emerging discipline that aims to integrate computational materials science tools into a holistic system that can accelerate materials development, tr...

Vasisht Venkatesh, Ralph Green… in Integrating Materials and Manufacturing In… (2018)

Article

Delineation of Prior Austenite Grain Boundaries in a Low-Alloy High-Performance Steel

Characterization of prior austenite grain size is important for understanding the microstructure–property relationships in steels. The prior austenite grain size plays an important role in defining the microst...

V. Sinha, E. J. Payton, M. Gonzales… in Metallography, Microstructure, and Analysis (2017)

Article

Hydrogen storage properties of MgH₂ co-catalyzed by LaH₃ and NbH

To improve the hydrogen storage properties of Mg-based alloys, a composite material of MgH₂ + 10wt%LaH₃ + 10wt%NbH was prepared by a mechanical milling method. The composite exhibited favorable hydrogen desorptio...

Jian-zheng Song, Zi-yang Zhao, **n Zhao… in International Journal of Minerals, Metallu… (2017)