111 Result(s)
-
Article
Open AccessColorimetric sensor to monitor the temperature with in situ synthesized silver nanoparticles embedded in carboxymethyl cellulose metallogel
A colorimetric sensing platform based on carboxymethyl cellulose-silver nanoparticles (CMC-AgNPs) metallogel was proposed to monitor the temperature history and quality of perishable products stored at low tem...
-
Article
Correction: Impact of Ultrasonic Surface Rolling Processes on Microstructures and Fatigue Properties of 300M Steel Laser-Cladding-Repaired Components
-
Article
Correction to: Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells
-
Article
Open AccessEvaluation of Sensitization Behaviors on the Heat-Affected Zone of Austenitic Stainless Steel Weld by Thermal Cycles of Actual Multi-pass Welding
The sensitization behavior of the welding heat affected zone (HAZ) in austenitic stainless steels (SSs) was investigated through simulated thermal cycles emulating actual multi-pass welding processes using the...
-
Article
Correction to: Manipulation of Hole and Exciton Distributions in Organic Light-Emitting Diodes with Dual Emission Layers
-
Article
Correction: Microstructure-controlled Electrodeposition of Mechanically Reliable Double-layered Thin Foils for Secondary Batteries
-
Article
Open AccessCharacterization of Formed TRIP1180 Steel Sheet Surface After Stam** with PVD-Coated Tools
The wear tests are conducted on bending punches deposited with PVD CrN and AlTiCrN coatings using the newly proposed progressive die. Then, the surface quality of the formed product is characterized through th...
-
Article
Correction: High Temperature Oxidation Resistance of NiCoCrAl High Entropy Alloy Coating on the TiAl Alloy
-
Article
Open AccessEnhancing Strength-Ductility Synergy of CoCrNi-Based Medium-Entropy Alloy Through Coherent L12 Nanoprecipitates and Grain Boundary Precipitates
The L12-strengthened Co34Cr32Ni27Al4Ti3 medium-entropy alloy (MEA) with precipitations of grain boundaries has been developed through selective laser melting (SLM) followed by cold rolling and annealing, exhibiti...
-
Article
Open AccessThe innate interfacial elastic strain field of a transformable B2 precipitate embedded in an amorphous matrix
When a transformable B2 precipitate is embedded in an amorphous matrix, it is often experimentally observed that the crystalline-amorphous interface not only serves as an initiation site for the martensitic tr...
-
Article
Correction: Influence of Hydrogen on the Passive Behavior of Eutectic High-Entropy Alloy AlCoCrFeNi2.1 in a Sulfuric Acid Solution
-
Article
RETRACTED ARTICLE: Investigation for the Influence of CO2 on the Corrosion Behavior of 42CrMo Steel through Heat Treatment
-
Article
Open AccessDriving forces for ultrafast laser-induced sp2 to sp3 structural transformation in graphite
Understanding the microscopic mechanism of photoinduced sp2-to-sp3 structural transformation in graphite is a scientific challenge with great importance. Here, the ultrafast dynamics and characteristics of laser-...
-
Article
Comparison of Creep Mechanisms Between Co-Al-W- and CoNi-Based Single Crystal Superalloys at Low Temperature and High Stresses
TO further understand the creep performance of γ′-strengthened Co-based superalloys at low temperatures, the creep behaviors and mechanisms of a Co-Al-W-based and a CoNi-based single crystal superalloys (alloy...
-
Article
Open AccessFirst-Principles Calculations of Elastic and Thermodynamic Properties for Multi-component Co-based Superalloys
First-principles calculations were performed to investigate the elastic and thermodynamic properties for multi-component Co-based superalloy systems and explored the effect of alloying on stabilizing the γ′ phase...
-
Article
Interface Passivation of Perovskite Solar Cells by Fmoc-Ala-OH Amino Acids
Carrier recombination at the interfaces of perovskite solar cells (PSCs) has always been one of the main limitations of device performance. How to restrain the generation of defect state on the perovskite film...
-
Article
Open AccessPeriodic plane-wave electronic structure calculations on quantum computers
A procedure for defining virtual spaces, and the periodic one-electron and two-electron integrals, for plane-wave second quantized Hamiltonians has been developed, and it was validated using full configuration...
-
Article
Open AccessComparing Relative Bond Characteristics Between Spherical and Elongated Morphologies for Cold Spray Process Using SPH Simulation
Under cold spray conditions, the modified Johnson–Cook model was adopted to perform single and multiple particle simulation for spherical and elongated aluminum alloy- Al-6061 feedstock particles. The splat fo...
-
Article
Open AccessSimultaneous enhancement in electrical conductivity and Seebeck coefficient by single- to double-valley transition in a Dirac-like band
SnTe possesses a single- to double-valley transition in the conduction band minimum when a compressive strain is applied. Through a tight-binding analysis, it is shown that the variation of the band structure ...
-
Article
Open AccessSolid-phase sintering and vapor-liquid-solid growth of BP@MgO quantum dot crystals with a high piezoelectric response
Low-dimensional piezoelectric and quantum piezotronics are two important branches of low-dimensional materials, playing a significant role in the advancement of low-dimensional devices, circuits, and systems. ...