Skip to main content

and
  1. No Access

    Article

    Effects of dynamic strain aging on mechanical properties of SA508 class 3 reactor pressure vessel steel

    An as-received reactor pressure vessel (RPV) steel SA508 class 3 (SA508 Cl.3) has been subjected to uniaxial tension tests in the strain-rate range of 6.67 × 10−5 s−1 to 1.2 × 10−2 s−1 and the temperature range o...

    S. Xu, X. Q. Wu, E. H. Han, W. Ke in Journal of Materials Science (2009)

  2. No Access

    Article

    Role of dynamic strain aging in corrosion fatigue of low-alloy pressure vessel steel in high temperature water

    Low cycle fatigue (LCF) behavior of an A533B-type low-alloy pressure vessel steel was investigated in 200 °C and 288 °C water. Major attention was paid to the role of dynamic strain aging (DSA) on corrosion fa...

    X. Q. Wu, Y. Katada in Journal of Materials Science (2007)

  3. No Access

    Article

    Strain-amplitude dependent fatigue resistance of low-alloy pressure vessel steels in high-temperature water

    Low cycle fatigue resistance of low-alloy pressure vessel steels was investigated in 561 K air and water over a wide strain amplitude range. It was found that fatigue resistance of the steels was enhanced in h...

    X. Q. Wu, Y. Katada in Journal of Materials Science (2005)

  4. No Access

    Article

    Influence of strain rate change on corrosion fatigue behavior of A533B steel in simulated BWR water

    X. Q. Wu, Y. Katada in Journal of Materials Science (2004)

  5. No Access

    Article

    Study on high-temperature naphthenic acid corrosion and erosion-corrosion of aluminized carbon steel

    High-temperature naphthenic acid corrosion (NAC) and erosion-corrosion (NAEC) behaviors of pack-aluminized carbon steel have been investigated in laboratory to evaluate the resistance of aluminized layer to th...

    X. Q. Wu, H. M. **g, Y. G. Zheng, Z. M. Yao, W. Ke in Journal of Materials Science (2004)

  6. No Access

    Article

    Morphologies of coke deposited on surfaces of pure Ni and Fe-Cr-Ni-Mn alloys during pyrolysis of propane

    Morphologies of coke deposited on pure Ni and Fe-Cr-Ni-Mn alloy surfaces during pyrolysis of propane at 750–1000°C have been investigated in detail. It is found that surface scales developed initially on pure ...

    X. Q. Wu, Y. S. Yang, W. Y. He, Q. Zhan, Z. Q. Hu in Journal of Materials Science (2000)

  7. No Access

    Article

    Difference in As-cast Structures of Centrifugal Casting Heat- Resistant Alloy Caused by Exerted Electromagnetic Field and Cooling Conditions

    X. Q. Wu, Q. Zhan, Y. S. Yang, Z. Q. Hu in Journal of Materials Science Letters (1998)