Skip to main content

9 Result(s)

within Tien-Long Banh Remove this filter Mechanical Engineering Remove this filter

and

  1. No Access

    Chapter and Conference Paper

    Taguchi Based Process Parameters Optimization in Vibration Assisted Die Sinking Electrical Discharge Machining

    The integration of low frequency vibration with the workpiece can enhance the machining efficiency in die sinking electrical discharge machining. Since the adaptation of vibration increases the complexity in ...

    Huu Phan Nguyen, Tien Long Banh… in Advances in Engineering Research and Appli… (2020)

  2. No Access

    Chapter and Conference Paper

    Performance Analysis of Copper Coated Aluminum Tool in Electrode Discharge Machining of Ti-6Al-4V Alloy

    Electric Discharge Machining (EDM) is one of the most popular nontraditional machining processes applied for machining very hard conductive materials with desired shape, size and dimensional accuracy. In this...

    Huu-Phan Nguyen, Tien-Long Banh… in Proceedings of the International Conferenc… (2022)

  3. No Access

    Chapter and Conference Paper

    Optimization of Machining Parameters Affects Chip Shrinkage Coefficient, Cutting Force, and Von-Mises When Machining Aluminum Alloy

    The FEM (finite element method) is castoff as an alternative to the experimental process and accurately predicts a number of phenomena such as cutting force, cutting heat … in the metal machining process. This...

    Thi-Hoa Pham, Tien-Long Banh, Duc-Thanh Pham in Proceedings of the International Conferenc… (2022)

  4. No Access

    Chapter and Conference Paper

    Tool Rotary Assisted EDM Processing of SKD61 Steel: Influence and Optimizing of Main Process Parameters and Surface Roughness

    Electric discharge machining (EDM) has attracted a lot of interest from researchers. They found solutions to improve machining efficiency, rotary tool electrode assisted EDM (RAEDM) is one of those solutions. ...

    Van Tao Le, Tien Long Banh, Tien Lap Do… in Proceedings of the International Conferenc… (2022)

  5. No Access

    Chapter and Conference Paper

    Thinning Prediction of Sheet Metal in Deep Drawing Process of a Cylindrical Cup Made of SPCC Material

    Sheet metal forming technology has an important role in the industrial field. In particular, it must be mentioned that in the current automobile manufacturing industry, SPCC sheet metal is used to make fuel fi...

    The-Thanh Luyen, Thi-Bich Mac… in Proceedings of the International Conferenc… (2022)

  6. No Access

    Chapter and Conference Paper

    Combined Simulation and Experimental Study on the Fracture Heights of the Cylinder Cup to Predict Forming Limit Curves of SPCC Material at Warm Temperatures

    When researching about the forming limit curves (FLC) of sheet metals, the modified maximum force criterion (MMFC) was proposed by Hora et al. [1] is often used by its accuracy. In this study, uniaxial tensile te...

    The-Thanh Luyen, Thi–Bich Mac… in Proceedings of the International Conferenc… (2022)

  7. No Access

    Chapter and Conference Paper

    Multi Response Optimization on Machining Process Using Taguchi-DEAR Analysis in Powder Mixed EDM Process

    The process parameters of such process should be optimized to improve the quality measures.

    Quang-Dung Le, Huu-Phan Nguyen… in Proceedings of the International Conferenc… (2022)

  8. No Access

    Chapter and Conference Paper

    A Study on Mechanical Properties of SKD11 Steel at Elevated Temperatures

    This paper presents experimental results on the mechanical properties of SKD11 steel at room temperature and elevated temperatures. An experimental system that consists of samples, an electromagnetic induction...

    Thi-Bich Mac, The-Thanh Luyen, Gia-Hai Vuong… in Proceedings of the International Conferenc… (2022)

  9. No Access

    Article

    Investigating the impact of yield criteria and process parameters on fracture height of cylindrical cups in the deep drawing process of SPCC sheet steel

    This study aims to accurately select a yield criterion by utilizing the identification coefficient method to describe anisotropic behavior using material parameters and finite element simulation. The influence...

    The-Thanh Luyen, Thi-Bich Mac… in The International Journal of Advanced Manu… (2023)