Skip to main content

4 Result(s)

within T. Pasang Remove this filter

and

  1. No Access

    Article

    Microstructure and Mechanical Properties of Welded Additively Manufactured Stainless Steels SS316L

    Microstructure and mechanical properties of additively manufactured SS316L has been investigated. The samples produced by selective electron beam melting machine were then subjected to gas tungsten arc welding...

    T. Pasang, A. Kirchner, U. Jehring, M. Aziziderouei… in Metals and Materials International (2019)

  2. No Access

    Article

    Solidification During Selective Laser Melting of Co-29Cr-6Mo Alloy

    Solidification during selective laser melting (SLM) needs to be better understood. In this work, track formation and how it affects grain growth during SLM of Co-29Cr-6Mo alloy over the laser power range of 18...

    Z. W. Chen, T. Guraya, K. Darvish, M. A. L. Phan, T. Pasang in JOM (2019)

  3. No Access

    Chapter and Conference Paper

    Influence of Stir Flow on Joint Quality During Friction Stir Lap Al-to-Cu Welding

    Discontinuity free interface region of Al-to-Cu lap joints are required for high mechanical strength and low electrical resistance. While discontinuity free Al-to-Cu lap joints are difficult to produce using f...

    D. Parningotan, M. Tarrant, Z. W. Chen… in Friction Stir Welding and Processing IX (2017)

  4. No Access

    Article

    Progression of tool deterioration and related cutting force during milling of 718Plus superalloy using cemented tungsten carbide tools

    Understanding how tool deterioration affects total force (F) during milling of Ni-based superalloys is important for the improvement of machinability of the alloys and serves to clarify whether and how an F-based...

    N. H. Razak, Z. W. Chen, T. Pasang in The International Journal of Advanced Manu… (2016)