-
Article
Modeling for ultrasonic vibration-assisted helical grinding of SiC particle-reinforced Al-MMCs
Silicon carbide (SiC) particle-reinforced aluminum matrix (SiCp/Al) composites are increasingly finding applications across a range of industries due to their exceptional mechanical properties. However, these com...
-
Article
Investigation of electrostatic-assisted ultrasonic atomization and spraying
Ultrasonic atomization technology has recently been widely used in industry due to its higher atomization efficiency. This paper proposes a method of electrostatic-assisted ultrasonic atomization spraying and ...
-
Article
Optimization of processing parameters for waterjet-guided laser machining of SiC/SiC composites
Interactions between light and matter during short-pulse water-jet guided laser materials processing are highly nonlinear, and acutely sensitive to laser machining parameters. Traditionally, the physical simul...
-
Article
Investigation on the machined surface quality and removal mechanism of SiCf/SiC composites in ultrasonic-assisted grinding
SiCf/SiC composites have been applied in numerous fields owing to their excellent out-of-plane properties, impact resistance, and delamination resistance. However, such composites are hard and brittle, and thus r...
-
Article
Analytical modelling of side grinding of orthogonal laminated SiCf/SiC composites based on effective elastic properties
SiCf/SiC composites have been applied in numerous fields owing to their outstanding properties including high specific strength and high specific modulus. However, defects can be produced during grinding because ...
-
Article
Influence of input signal on injection performance for needle driven piezoelectric micro-jet device
Due to the fast response, high precision and high working frequency, needle driven piezoelectric micro-jet devices have been applied in various industrial fields. The injection performance is important for the...
-
Article
Experimental observation of oil mist penetration ability in minimum quantity lubrication (MQL) spray
Minimum quantity lubrication (MQL) is an eco-friendly cooling and lubricating method that has its importance in machining sustainability. However, the behavior of the MQL droplets remains questionable. The pre...
-
Article
Correction to: Mathematical modeling and experimental studies on axial drilling load for rotary ultrasonic drilling of C/SiC composites
Fig. 2, Eq. (8), and Eq. (26) have been updated.
-
Article
A Cutting Force Prediction Model, Experimental Studies, and Optimization of Cutting Parameters for Rotary Ultrasonic Face Milling of C/SiC Composites
Ceramic matrix composites of type C/SiC have great potential because of their excellent properties such as high specific strength, high specific rigidity, high-temperature endurance, and superior wear resistan...
-
Article
Mathematical modeling and experimental studies on axial drilling load for rotary ultrasonic drilling of C/SiC composites
Ceramic matrix composites of type C/SiC have great potential in space applications because of their superior properties such as low density, high wear resistance, and high-temperature resistance. However, due ...
-
Article
A cutting force prediction model for rotary ultrasonic side grinding of CFRP composites considering coexistence of brittleness and ductility
Cutting force has a great effect on the machining surface/subsurface damage. The prediction model of cutting force is necessary to optimize input variables. During rotary ultrasonic side grinding (RUSG), the i...
-
Article
A cutting force model based on kinematic analysis in longitudinal and torsional ultrasonic vibration drilling
The longitudinal and torsional ultrasonic machining (LTUM) is an emerging ultrasonic vibration machining method, which is an innovation method based on rotary ultrasonic machining (RUM). Compared with one-dime...
-
Article
Numerical and experimental optimizations of nozzle distance in minimum quantity lubrication (MQL) milling process
Minimum quantity lubrication (MQL) is the efficient and environmentally friendly technology, which is desirable to achieve sustainability during machining process. The nozzle distance has its significance in d...
-
Article
Experimental Investigation on the Compatibility of Nanoparticles with Vegetable Oils for Nanofluid Minimum Quantity Lubrication Machining
Several health and environmental related issues caused by the application of traditional cutting fluids in machining can be solved by implementing eco-friendly technologies such as minimum quantity lubrication...
-
Article
A cutting force model based on kinematics analysis for C/SiC in rotary ultrasonic face machining
Ceramic matrix composites (CMC) have superior properties and are used in the harsh conditions of high temperature and pressure, in aerospace, and other industries. However, due to inhomogeneous and anisotropic...
-
Article
Research into the transition of material removal mechanism for C/SiC in rotary ultrasonic face machining
Ceramic matrix composites of type C/SiC with superior properties have got increasing importance in many fields of industry, especially in the aerospace area. Rotary ultrasonic machining is a high-efficiency pr...
-
Article
Development of cutting force prediction model for vibration-assisted slot milling of carbon fiber reinforced polymers
Carbon fiber reinforced polymers (CFRP) have got rapidly increased applications in aerospace/aircraft and other fields due to their attractive properties of high specific strength/stiffness, high corrosion res...
-
Article
Development of a generalized cutting force prediction model for carbon fiber reinforced polymers based on rotary ultrasonic face milling
Carbon fiber reinforced polymers (CFRP) have got paramount importance in aircraft, aerospace, and other fields due to their attractive properties of high specific strength/stiffness, high corrosion resistance,...
-
Article
Modeling of tool blockage condition in cutting tool design for rotary ultrasonic machining of composites
Although superior in properties, composite materials still have problems in machining, such as delamination, cracking, burning, tool blockage, and cost and efficiency issues. These problems can prevent wide ap...
-
Article
A polynomial equation-based interpolation method of NURBS tool path with minimal feed fluctuation for high-quality machining
Due to the approximation errors of interpolation methods in non-uniform rational b-spline (NURBS) interpolation, feed fluctuation is inevitable, which has great effects on the machining quality and should be m...
