Skip to main content

6 Result(s)

within S. S. Mohamed Nazirudeen Remove this filter

and

  1. No Access

    Article

    Development and Characterization of Functionally Gradient Al–Si Alloy Using Cast-Decant-Cast Process

    A cylindrical component of functionally gradient Al alloy with high silicon in the outer and low silicon in the core was produced using cast-decant-cast (CDC) process. The preparation of the component consiste...

    B. Anandavel, S. S. Mohamed Nazirudeen… in Transactions of the Indian Institute of Me… (2015)

  2. No Access

    Article

    Influence of Intermetallic Precipitates on Pitting Corrosion of High Mo Superaustenitic Stainless Steel

    Influence of intermetallic phases on the pitting corrosion of aged high Mo superaustenitic stainless steel is studied. To form the intermetallic phases the alloy was aged for 1 and 10 h at different temperatur...

    M. Balakrishnan, J. Anburaj… in Transactions of the Indian Institute of Me… (2015)

  3. No Access

    Article

    Solubility of Nitrogen in Superaustenitic Stainless Steels During Air Induction Melting

    The amount of nitrogen contained in super austenitic stainless steels (SASS) influences their properties significantly. The effect of maximum amount of nitrogen in the highly alloyed Cr and Ni SASS containing ...

    A. Chandrasekar, J. Anburaj, R. Narayanan… in Journal of Materials Engineering and Perfo… (2013)

  4. No Access

    Article

    Multi-Response Optimization of Carbidic Austempered Ductile Iron Production Parameters using Taguchi Method

    Carbide Austempered Ductile Iron (CADI) is the family of ductile iron containing wear resistance alloy carbides in the ausferrite matrix. This CADI is manufactured by selecting and characterizing the proper ma...

    P. Dhanapal, S. S. Mohamed Nazirudeen… in Journal of The Institution of Engineers (I… (2012)

  5. No Access

    Article

    A study of the structure and properties of high-strength bainite-carbide cast iron with globular graphite

    The structure and mechanical properties of two high-strength bainitic cast irons with carbon equivalent close to the eutectic one are studied. Additional alloying of one of the metals with chromium is used to ...

    P. Dhanapal, S. S. Mohamed Nazirudeen in Metal Science and Heat Treatment (2012)

  6. No Access

    Article

    Studies on Production and Thermo-Mechanical Treatment of 0.32% Nitrogen Alloyed Duplex Stainless Steel

    Duplex stainless steel with nitrogen content 0.32% was produced using a conventional induction furnace under normal ambient atmosphere. The samples were subsequently hot forged to various size reductions (23-5...

    P. Chandramohan, S.S. Mohamed Nazirudeen… in Journal of Materials Engineering and Perfo… (2008)