-
Chapter and Conference Paper
Understanding the Heat Transfer Characteristics and Axis Switching Phenomenon in High Aspect Ratio Elliptical Orifice Im**ing Synthetic Jets
The present experimental study focuses on analyzing the heat transfer characteristics and understanding the axis switching phenomenon for im**ing elliptic jets with high aspect ratios. The hot-wire anemometr...
-
Article
Modeling and Optimization of Process Parameters during Grooved Hot Rolling of SAE 1541 Steel
SAE 1541 grade steel bars are widely used in automobile sector, mining, ship** and forging industry due to their affordability and adaptability. Steel industries have been striving for productivity and bette...
-
Article
Process Variable Optimization for Hot-Profiled Rolling of SAE 52100 Steel
SAE 52100 steel bars are extensively employed in the mining, ship**, forging, and bearing industries. During manufacturing of bars, the roll force (RF), roll torque (RT), crop** loss (CL), and drive energy...
-
Article
Torrefaction of agro-wastes (palmyra palm shell and redgram stalk): characterization of the physicochemical properties and mechanical strength of binderless pellets
To increase the utilization of agro-waste as solid fuel, torrefaction is an important process to improve the fuel properties. In the present investigation, palmyra palm shell (PPS) and redgram stalk (RS) were ...
-
Article
Effect of process parameters on roll separating force, driving torque, and end crop length during grooved hot rolling of SAE 1541 steel
The medium carbon steel bars are widely used in automobile sector, mining, ship**, and forging industry. The use of SAE 1541 grade bars is quite common due to their affordability and adaptability. Basic prod...
-
Chapter and Conference Paper
Recent Trends in the Amelioration and Prediction of Surface Roughness in Turning Process: A Bibliometric Analysis
Turning is widely used manufacturing process in industries. Quality assurance of turned products includes dimensional accuracy and surface finish. A considerable number of research papers have been published o...
-
Article
Characterization and Processing of Aluminium 4032-Based Hybrid Composite Material Through Liquid Route Manufacturing
Aluminium metal matrix composites (AMCs) are known for their superior properties, such as light weight, high stiffness with superior strength, high impact toughness, and wear resistance. Production industries ...
-
Article
Microstructural, Mechanical and Machining Studies of Al-4032 Alloy Based Hybrid Composite
This paper presents fabrication, microstructural examination, mechanical and machining (turning) characterization of Al-4032/ 3%SiC/ 3%GMP (granite marble powder, wt.%) hybrid composite. Optical micrographs (O...
-
Article
Assessing the role of glaucousness in imparting tolerance to moisture and heat stress in wheat
Wheat production, productivity, and quality has been severely affected by drought and heat stresses across the world. Glaucousness, a light bluish appearance on flag leaf, stem, and spikes, is one of the adapt...
-
Article
Parametric modeling and optimization of electrochemical machining of EN-31 alloy steel
Electrochemical Machining (ECM) is an important advanced machining process useful to obtain good quality finish with a stress-free and crack free machined surface. Machining performance of the process is indep...
-
Article
A novel approach for prediction of surface roughness in turning of EN353 steel by RVR-PSO using selected features of VMD along with cutting parameters
The abrupt changes in tool-workpiece interaction during machining process induce variation in the surface quality of work material. These interactions include built-up edge formation and their break-off, envir...
-
Article
Structural and thermal properties of vitrain lithotype in coal-inferences from TG-DTG-DSC, Rock-Eval and X-ray diffraction
Vitrain is one of the most important lithotype for the end utilization of humic coals in relevant industries. In this work, we examine the thermal, structural and pyrolysis properties of vitrains, manually iso...
-
Article
Physical, Morphological, and Mechanical Characterization of Al-4032/GMP Composite Fabricated Through Stir Casting
The disposal of waste granite marble powder (GMP) causes environmental problems. The present work reports the impact of waste GMP as a reinforcement to produce composites. The Al-4032/GMP composites with 0%, 4...
-
Article
Impact of Particle Crush-Size and Weight on Rock-Eval S2, S4, and Kinetics of Shales
The Rock-Eval technique in the last few decades has found extensive application for source rock analysis. The impact of shale particle crush-size and sample weight on key Rock-Eval measurements, viz. the S2 curve...
-
Article
Impact of the Combined Application of Biochar and Compost on Mine Soil Quality and Growth of Lady’s Finger (Abelmoschus esculentus)
Amelioration of mine soil is challenging because of the lack of biologically active organic matter. The study was aimed to recycle yard waste into compost and biochar and to use them to reclaim mine soil. Bioc...
-
Article
Effect of Control Parameters on Tribological Performance of Al-4032/GP Composites
This paper presents the study on effect of control parameters (composition, normal load, sliding time and sliding speed) on dry sliding wear properties (tribological behaviour) of the aluminium alloy (Al-4032)...
-
Article
Investigation on the combustion characteristics of different plant parts of Cassia siamea by DSC-TGA
Plant parts like root, wood, twig and leaf of Cassia siamea, a fast-growing tree in the abandoned mines of Jharkhand, India, have been considered here as a possible fuel source for decentralized power generation....
-
Article
Stay-green trait serves as yield stability attribute under combined heat and drought stress in wheat (Triticum aestivum L.)
The present study was conducted to evaluate the effect of a stay-green trait to stabilize the yield responses under combined heat and drought stress on wheat. Ten Recombinant Inbred Lines (RILs) of wheat along...
-
Article
Protection from terminal heat stress: a trade-off between heat-responsive transcription factors (HSFs) and stress-associated genes (SAGs) under changing environment
Terminal heat stress (HS) has adverse effect on the quantity and quality of wheat grains, as evident from the reduction in the yield. Plant has inherited tolerance mechanism to protect itself from the environm...
-
Article
Nasal Mucoadhesive Microspheres of Lercanidipine with Improved Systemic Bioavailability and Antihypertensive Activity
The current study entails the design, development, and optimization of nasal mucoadhesive microspheres of lercanidipine with improved systemic bioavailability for the management of hypertension.
