-
Article
Short Photoperiod Reduces Oxidative Stress by Up-Regulating the Nrf2–Keap1 Signaling Pathway in Hamster Kidneys
Photoperiod can impact seasonal reproduction as well as the expression of antioxidant enzymes and the level of oxidative stress in animals. The kidney is an important metabolic organ, however studies on the ef...
-
Article
Technology Upgrades and Reliability Analysis of a Tribometer for Performance Evaluation of Cylinder Piston Rings
The design of existing tribometers mainly focuses on normal contact and lubricant conditions and aims to evaluate the effect of the load, speed, and environmental conditions on the rubbing pair properties. The...
-
Article
Plasma processed tungsten for fusion reactor first-wall material
Tungsten is one of the prime candidates for a first-wall material near the divertor area due to its high temperature strength, high thermal conductivity, low erosion rate and low tritium retention. The erosion...
-
Article
Open AccessRetraction Note: Disruption of the Bcr-Abl/Hsp90 protein complex: a possible mechanism to inhibit Bcr-Abl-positive human leukemic blasts by novobiocin
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
-
Article
Open AccessAnti-CD30 chimeric antigen receptor T cell therapy for relapsed/refractory CD30+ lymphoma patients
-
Article
Determination and Visualization of Different Levels of Deoxynivalenol in Bulk Wheat Kernels by Hyperspectral Imaging
A hyperspectral imaging system is proposed as a method to rapidly and nondestructively predict mycotoxin deoxynivalenol (DON) levels in FHB-infected wheat kernels. Standard normal variate transformation and mu...
-
Article
Long-term outcomes of HLA-haploidentical stem cell transplantation based on an FBCA conditioning regimen compared with those of HLA-identical sibling stem cell transplantation for haematologic malignancies
A comparison was conducted of 213 patients with haematologic malignancies who underwent HLA-identical sibling (n=108) or HLA-haploidentical (n=105) haematopoietic cell transplantation (haplo-HCT) at our centre. T...
-
Article
Bisphosphonates for prevention of osteopenia in kidney-transplant recipients: a systematic review of randomized controlled trials
We conducted a systematic review of randomized controlled trials (RCTs) of bisphosphonates for the prevention of osteopenia in kidney-transplant recipients. Bisphosphonates improved bone mineral density at the...
-
Article
Open AccessKnockdown of linc-UFC1 suppresses proliferation and induces apoptosis of colorectal cancer
Long intergenic noncoding RNAs (lincRNAs) have important roles in biological functions, molecular mechanisms and prognostic values in colorectal cancer (CRC). In this context, the roles of linc-UFC1 remain to ...
-
Chapter and Conference Paper
Effect of Electric Field Intensity on Atom Diffusion in Cu/Ta/Si Stacks
In this letter, we present a quantitative analysis of different electric field intensity on interface atom diffusion in a Cu/Ta/Si stack at 650 °C annealing. It was found that the external electric field accel...
-
Article
Evaluation of electric field intensity on atom diffusion of Cu/Ta/Si stacks during annealing
Cu/Ta/Si stacks were prepared and, subsequently, annealed at 650 °C with different electric field intensity (0–4.0 kV/cm). The effect of electric field intensity on atomic diffusion was determined from cross-s...
-
Article
Long-term outcome of HLA-haploidentical hematopoietic stem cell transplantation without in vitro T-cell depletion based on an FBCA conditioning regimen for hematologic malignancies
Haploidentical hematopoietic stem cell transplantation (haplo-HSCT) is an alternative for patients who need a transplant without having conventional donors. One hundred and five consecutive patients with hemat...
-
Article
Grinding temperature during high-efficiency grinding Inconel 718 using porous CBN wheel with multilayer defined grain distribution
Porous cubic boron nitride (CBN) wheel with multilayer defined grain distribution was developed based on pore-forming effect of alumina bubbles and sintering technology. High-efficiency grinding experiments we...
-
Article
A comparison between conventional speed grinding and super-high speed grinding of (TiCp + TiBw) / Ti–6Al–4V composites using vitrified CBN wheel
Comparative grinding experiments of (TiCp + TiBw) / Ti–6Al–4V composites were conducted using vitrified CBN wheel at the conventional wheel speed of 20 m/s and the super-high wheel speed of 120 m/s, respectively....
-
Article
Open AccessEfficacy and Safety of 1 % Terbinafine Film-Forming Solution in Chinese Patients with Tinea Pedis: A Randomized, Double-Blind, Placebo-Controlled, Multicenter, Parallel-Group Study
Superficial fungal skin infections are treated using topical antifungals. The aim of this study was to demonstrate the efficacy of a single application of 1 % terbinafine film-forming solution (FFS) versus pla...
-
Article
Influence of electric field annealing on atom diffusion in Cu/Ta/Si stacks
In this letter, we present a quantitative analysis of the influences caused by an electric field annealing on interface atom diffusion in a Cu/Ta/Si stack at a range of temperatures 450∼650 °C. The results ind...
-
Article
Fractal analysis of wear topography of brazed polycrystalline cBN abrasive grains during grinding nickel super alloy
In order to characterize quantificationally the wear topography of the brazed polycrystalline cBN (PcBN) grains during grinding, the reconstruction model of grain topography is established through the photogra...
-
Article
Joining interface and grain fracture of single-layer brazed grinding wheels with binderless CBN grains
Fabrication experiments of single-layer brazed grinding wheels were carried out using binderless cubic boron nitride (CBN) grains, Cu–Sn–Ti alloy and AISI 1045 steel. The brazing temperature was 900 °C and the...
-
Article
Preparation mechanism and grinding performance of single-layer self-lubrication brazed CBN abrasive wheels
In order to fabricate single-layer self-lubrication brazed cubic boron nitride (CBN) abrasive wheels, brazing experiments of graphite particles and AISI 1045 steel were carried out using Ag–Cu–Ti filler alloy....
-
Article
Fabrication and performance of porous metal-bonded CBN grinding wheels using alumina bubble particles as pore-forming agents
Porous metal-bonded cubic boron nitride (CBN) composite blocks and grinding wheels were fabricated using alumina bubble particles as pore-forming agents and Cu-Sn-Ti alloy as bonding material. The influence of...
