Skip to main content

22 Result(s)

within F. C. Liu Remove this filter

previous disabled Page of 2
and

  1. No Access

    Article

    Recent progress of aluminum alloys and aluminum matrix composites produced via laser powder bed fusion: a review

    Al alloys and aluminum matrix composites (AMCs) are characterized by high specific strength, high specific modulus, and low density. As one of the most promising advanced lightweight materials, Al alloys and A...

    H. Zhang, D. R. Ni, B. L. **ao, F. C. Liu, Z. Y. Ma in Journal of Materials Science (2024)

  2. No Access

    Article

    Preparation and investigation of structure, magnetic, and dielectric properties of (1 − x)Bi2Fe4O9–xMgFe2O4 bicomponent ceramics

    Crystal structure, morphology, magnetic, and dielectric properties of (1 − x)Bi2Fe4O9–xMgFe2O4 bicomponent ceramics are investigated in detail. The material has been synthesized via sol–gel method. Analysis of X-...

    L. G. Wang, G. B. Yu, C. M. Zhu, F. Z. Lv… in Journal of Materials Science: Materials in… (2019)

  3. No Access

    Article

    Enhanced room-temperature magnetoelectric effect in xBi0.5Na0.5TiO3-(1-x)NiFe2O4 ceramics by magnetic field annealing

    The polycrystalline xBi0.5Na0.5TiO3-(1-x)NiFe2O4 solid solutions with different ratios have been synthesized by sol-gel method. The samples are respectively annealed with nonmagnetic and magnetic field annealing ...

    L. G. Wang, C. M. Zhu, S. L. Yuan, F. C. Liu, Y. He, H. Yang… in Journal of Electroceramics (2019)

  4. No Access

    Article

    Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of Dissimilar Metal Weld Used in Power Plants

    High base metal dilution (50 pct) dissimilar metal weld between A508 low-alloy steel and 309L clad layer was fabricated to investigate the effect of extended post-weld heat treatment (PWHT) on microstructure a...

    F. C. Liu, T. W. Nelson, S. L. McCracken in Metallurgical and Materials Transactions A (2019)

  5. No Access

    Chapter and Conference Paper

    Promising High-Speed Welding Techniques for Joining Polymers to Metals and Underlying Joining Mechanisms

    Strong (DMW) of PA66 and 6061 Al was produced by (FLW) at welding speeds as high as 5 m/min. The temperature difference at various locations of the welds did not affect the local joining strength. In an at...

    F. C. Liu, P. Dong in Friction Stir Welding and Processing X (2019)

  6. No Access

    Article

    Blood pressure is associated with tea consumption: A cross-sectional study in a rural, elderly population of Jiangsu China

    Tea has long been hypothesized to possess hypotensive effects. However, there is uncertainty regarding the association of tea consumption with arterial blood pressure (BP). We aimed to examine the association ...

    Jieyun Yin, Shengyu Duan, F.-C. Liu, Q.-K. Yao… in The journal of nutrition, health & aging (2017)

  7. No Access

    Article

    Superplastic Constitutive Equation Including Percentage of High-Angle Grain Boundaries as a Microstructural Parameter

    Fifteen Al-Mg-Sc samples with subgrain/grain sizes in the range of 1.8 to 4.9 μm were prepared through the processing methods of friction stir processing (FSP), equal-channel-angular pressing (ECAP), rolling, ann...

    K. Wang, F. C. Liu, P. Xue, D. Wang… in Metallurgical and Materials Transactions A (2016)

  8. No Access

    Article

    Effects of heating rates on microstructure and superplastic behavior of friction stir processed 7075 aluminum alloy

    The effects of heating rate prior to tension on the microstructure and superplastic behavior of friction stir processed (FSP) 7075Al alloy, with an initial grain size of 6.2 μm, were investigated. Under both s...

    K. Wang, F. C. Liu, P. Xue, B. L. **ao, Z. Y. Ma in Journal of Materials Science (2015)

  9. No Access

    Article

    Microstructural evolution and superplastic behavior in friction stir processed Mg–Li–Al–Zn alloy

    A Mg–Li–Al–Zn alloy was friction stir processed (FSP) under water, and the microstructures and superplastic behavior in the FSP alloy were investigated. The FSP Mg–Li–Al–Zn alloy consisted of a mixed microstru...

    F. C. Liu, M. J. Tan, J. Liao, Z. Y. Ma, Q. Meng, K. Nakata in Journal of Materials Science (2013)

  10. No Access

    Article

    Synthesis and crystal structure characterization of supramolecular complex [Cd2(Bipy)2(L)2(H2O)2] · 9H2O (H2L = 2,2′-bipyridyl-6,6′-dicarboxylic acid)

    In the complex [Cd2(Bipy)2(L)2(H2O)2] · 9H2O, the center atom Cd(II) presents a seven-coordinated pentagonal bipyramidal geometry with seven coordination bonds, four Cd-N bonds, and three Cd-O bonds. X-ray struct...

    E. J. Gao, Z. Wen, M. C. Zhu, Y. Wang… in Russian Journal of Coordination Chemistry (2010)

  11. No Access

    Article

    A novel 3D lead(II) organometallic framework with four lead(II) nuclei as a secondary building unit: Synthesis and characterization

    A new 3D layered compound, [Pb2(L)2H2O] n (L is phenylmalonic acid) was hydrothermally synthesized and characterized by single-crystal X-ray diffraction. In the compound, lead h...

    E. J. Gao, H. Y. Liu, M. C. Zhu, F. C. Liu… in Russian Journal of Coordination Chemistry (2009)

  12. No Access

    Article

    Synthesis and crystal structure of a Cu(II) complex Cu2(Endc)2(Bipy)2 and its photoluminescence properties

    A novel Cu(II) complex Cu2(Endc)2(Bipy)2 has been synthesized by the reaction of Cu(NO3)2 · 3H2O, Endc (endo-norbornene-cis-5,6-dicarboxylic acid), and Bipy (2,2-bipyridine) at room temperature. Elemental analysi...

    E. J. Gao, S. Ma, Y. Huang, H. Y. Liu… in Russian Journal of Coordination Chemistry (2009)

  13. No Access

    Article

    Achieving high strain rate superplasticity in cast 7075Al alloy via friction stir processing

    Cast 7075Al alloys under as-cast and homogenized conditions were subjected to single-pass friction stir processing (FSP). FSP converted the coarse as-cast structure to the fine-grained structure with a grain s...

    F. C. Liu, Z. Y. Ma in Journal of Materials Science (2009)

  14. No Access

    Article

    Influence of Tool Dimension and Welding Parameters on Microstructure and Mechanical Properties of Friction-Stir-Welded 6061-T651 Aluminum Alloy

    Six-millimeter-thick 6061Al-T651 plates were friction stir welded with varied welding parameters and tool dimensions. The low hardness zones (LHZs), determined by constructing the hardness distribution maps ar...

    F.C. Liu, Z.Y. Ma in Metallurgical and Materials Transactions A (2008)

  15. No Access

    Article

    Whispering gallery mode biosensors in the low-Q limit

    Whispering gallery modes (WGM) of dye-doped polystyrene beads with diameters from 20 down to 1.5 μm are studied with respect to their appearance and linewidth by excitation of the entire mode spectrum within t...

    A. Weller, F.C. Liu, R. Dahint, M. Himmelhaus in Applied Physics B (2008)

  16. No Access

    Article

    Dynamic and Gravitational Effects on the Correlation Volume: Experimental Methods

    We report on the design of a new prototype flight instrument that will be used to repeat previous Earth-based measurements of nonlinear heat transport near the superfluid transition in the microgravity laborat...

    R. V. Duncan, D. A. Sergatskov, S. T. P. Boyd… in Journal of Low Temperature Physics (2000)

  17. No Access

    Article

    Gravitational Effects on Nonlinear Heat Transport Near the Superfluid Transition in 4He

    We have recently observed nonlinear heat transport within 30 nK of the superfluid transition temperature using heat flux, Q, in the range 0.1 < Q < 2 erg/(s cm 2 ). While Haussmann and Dohm (HD) accurately predi...

    R. V. Duncan, P. K. Day, S. S. McCready, W. A. Moeur… in Journal of Low Temperature Physics (1998)

  18. No Access

    Article

    Effect of gravity on the thermal conductivity measurement of4He nearT λ

    Precision measurements near the superfluid (λ) transition of4He is limited by a gravity induced inhomogeneity inT λ. Critical Dynamics in Microgravity (DYNAMX, a NASA preproject) will study the th...

    F-C Liu, R. Duncan, U. Israclsson, T. Chui, D. Hensinger… in Czechoslovak Journal of Physics (1996)

  19. No Access

    Article

    Characterization and analysis of low-temperature superplasticity in 8090 Al-Li alloys

    The 8090 Al-Li alloys, after a special thermomechanical process (TMP), exhibited low-temperature superplasticity (LTSP) from 350 °C to 450 °C and behaved differently from the conventional high-temperature supe...

    H. P. Pu, F. C. Liu, J. C. Huang in Metallurgical and Materials Transactions A (1995)

  20. No Access

    Article

    Heat capacity of H2 adsorbed on Ne and on D2 preplated graphite

    We have performed heat capacity measurement on H2 adsorbed on graphite preplated with either a monolayer of Ne or a monolayer of D2, to search for low temperature 2D liquid H2. We find evidence indicating that up...

    F. C. Liu, Y. M. Liu, O. E. Vilches in Journal of Low Temperature Physics (1992)

previous disabled Page of 2