-
Article
Open AccessDefect-Correlated Vickers Microhardness of Al-Si-Mg Alloy Manufactured by Laser Powder Bed Fusion with Post-process Heat Treatments
Laser powder bed fusion is an additive manufacturing process characterized by different advantages like the manufacture of samples with complex geometry without the use of tools and/or molds. Generally, the ma...
-
Article
Open AccessEffect of the Distance from Build Platform and Post-Heat Treatment of AlSi10Mg Alloy Manufactured by Single- and Multi-Laser Selective Laser Melting
In the present study, AlSi10Mg samples produced by selective laser melting (SLM) were studied. Samples were machined from two types of bars obtained through different methods: either single laser (SL) or multi...
-
Chapter and Conference Paper
Creep Behavior of a AlSiMg Alloy Produced by Additive Manufacturing
The present study aims at investigating the effect of the peculiar of manufactured samples on the behavior of an . Constant load experiments were carried out between 150 and 205 ℃ on samples produce...
-
Article
The Influence of Ni and V Trace Elements on High-Temperature Tensile Properties and Aging of A356 Aluminum Foundry Alloy
High-temperature tensile properties of unmodified A356 alloy with and without the addition of Ni or V in traces (600 and 1000 ppm of Ni and V, respectively) were investigated by analyzing samples obtained from...
-
Article
Mechanical Properties and Microstructural Evolution of Friction-Stir-Welded Thin Sheet Aluminum Alloys
Friction stir welding of thin aluminum sheets represents a potential goal for aircraft and automotive industries because of the advantages of using this new technological process. In the current work, the micr...
-
Article
An evaluation of the creep properties of two Al-Si alloys produced by rapid solidification processing
Tensile creep tests were conducted on two Al-Si alloys produced by rapid solidification: an Al-Si-Ni-Cr alloy and an Al-Si-Cu-Fe alloy, designated alloys A and B, respectively. The creep curves of these two al...