Skip to main content

6 Result(s)

within Bingge Zhao Remove this filter Materials Science Remove this filter Nanotechnology Remove this filter

and

  1. No Access

    Article

    Cooling rate dependent undercooling of Bi in a Zn matrix by differential fast scanning calorimetry

    We presented the investigation on the cooling rate dependent undercooling of the microsized and nanosized Bi droplets in the Zn matrix via differential fast scanning calorimetry at scanning rates ranging from ...

    Linfang Li, Bingge Zhao, Bin Yang, Quanliang Zhang… in Journal of Materials Research (2015)

  2. No Access

    Article

    Highly spherical, mono-sized SnAgCu droplets by pulsated orifice ejection method

    Spherical Sn0.3Ag0.7Cu (wt.%) solder droplets with diameter ranging from 70.6 to 334.0 ώm were prepared using pulsated orifice ejection method. Compared with conventional atomization, these droplets are almost...

    Bingge Zhao, Wei Dong, Huijun Ji, Quanliang Zhang, Ling Zhang… in MRS Communications (2017)

  3. No Access

    Article

    Failure Transition Mechanism of Stress Rupture Performance of the Inconel 625/9 Pct Cr Steel Dissimilar Welded Joint

    Based on a series of stress rupture tests at 620 °C under 110 to 170 MPa and at 650 °C under 80 to 110 MPa, the relationship between the stress and rupture time was obtained to evaluate the long-term performan...

    Kai Ding, Shangfei Qiao, Shu** Liu… in Metallurgical and Materials Transactions A (2019)

  4. No Access

    Article

    Role of the V-Notch Location in the Impact Toughness of 9 Pct Cr-CrMoV Dissimilar Welded Joints

    The location of the V-notch in a weld metal (WM) can have a significant influence on the impact toughness of a 9 weight percent (9 pct) Cr-CrMoV dissimilar welded joint. The specimens with the V-notch at posit...

    Kai Ding, Bingge Zhao, **n Huo, Manjie Fan… in Metallurgical and Materials Transactions A (2020)

  5. No Access

    Article

    Influence of dealloying solution on the microstructure of nanoporous copper through chemical dealloying of Al75Cu25 ribbons

    In this article, Al75Cu25 (at.%) ribbons were dealloyed by HCl, H2C2O4, H3PO4, and NaOH solutions, respectively, to prepare nanoporous copper (NPC). The dealloying behavior is varied with dealloying solutions, al...

    Hailan Ma, Bingge Zhao, Kai Ding, Yuanheng Zhang… in Journal of Materials Research (2020)

  6. No Access

    Article

    Glass transition and crystallization of Ce68Al10Cu20Co2 bulk metallic glass studied by Flash DSC

    In this study, glass transition and crystallization of Ce68Al10Cu20Co2 bulk metallic glass at heating rates ranging from 0.083 to 14,000 K/s, covering six orders of magnitude, are investigated. For the glass tran...

    Zikang Wei, Chenhui Wang, Luojia Zhang, **tao Luo… in Journal of Materials Research (2024)