-
Article
Correction: Thermophysical properties and heat transfer in mono and hybrid nanofluids with different base fluids: an overview
-
Article
Transfer learning based epileptic seizure classification using scalogram images of EEG signals
Epilepsy is a common neurological disorder that occurs due to an abnormality of the nerve cells in the brain. Electroencephalogram (EEG) analysis is one of the most vital tools used to detect seizure events. N...
-
Article
Thermophysical properties and heat transfer in mono and hybrid nanofluids with different base fluids: an overview
Hybrid nanofluids are a promising class of fluids that combine the advantages of nanoparticles with a base fluid to enhance heat transfer performance. They have potential applications in various fields and are...
-
Article
Three-dimensional Moho depth model of the eastern Indian shield and its isostatic implications
The Singhbhum Craton, Singhbhum Mobile Belt along its northern, eastern, and western edges, and Chotanagpur Gneissic Complex farther north are all parts of the Precambrian eastern Indian shield. Modern isotope...
-
Article
Optical response of Eu3+-activated MgAl2O4 nanophosphors for Red emissive
Eu3+-activated magnesium aluminate phosphors were successfully synthesized by nitrate–citrate gel combustion method and thermally treated at 650, 750, 850, and 950oC. The powder X-ray diffraction pattern showed t...
-
Chapter and Conference Paper
The Influence of Baffle Cut and Baffle Distance on a Shell-Side Fluid Flow of a Shell-and-Tube Heat Exchanger
The research examines a shell-and-tube heat exchanger with segmental baffle to determine the effect of baffle cut and baffle spacing along with three-dimensional numerical simulation by using software ANSYS 19...
-
Article
Dielectric relaxation in layer-structured SrBi2−xGdxNb2O9 (x = 0.0, 0.4, 0.6, and 0.8) lead-free ceramics
The gadolinium (Gd3+)-doped SrBi2Nb2O9 (SBN) ceramics with the chemical formula SrBi2−xGdxNb2O9 (x = 0.0, 0.4, 0.6, and 0.8) have been prepared through traditional solid-state sintering method. X-ray diffraction ...
-
Article
Effect of Mg do** on the electrical, dielectric and relaxation properties of LiMnPO4 nanoparticles
LiMnPO4 and LiMn0.9Mg0.1PO4 nanostructures were synthesized by a rapid microwave-assisted solvothermal method. Powder X-ray diffraction (XRD) studies confirmed the orthorhombic crystal structure of LiMnPO4 and Li...
-
Chapter and Conference Paper
Review on the Application of CGP to Improve AZ31 Mg Alloy Properties
Constrained groove pressing (CGP) is a method of severe plastic deformation (SPD) techniques. It is being used to enhance mechanical properties and reduction in grain size. In CGP method, the specimen of sheet...
-
Article
Experimental Investigation and Numerical Simulation on the Strength of Carbon-Fiber-Reinforced Polymer–Metal Bolted and Bonded Interfaces
Composite laminated structural members in segmented cylindrical composite pressure vessels are integrated with metallic counterparts using mechanical fasteners. Load transfer in such structures will be through...
-
Article
A Short Walk through Gravity Studies at CSIR-NGRI, India
The Earth’s gravity field measurements and their applications for resource exploration and geodynamic studies form an important part of geophysical studies initiated at the CSIR-National Geophysical Research I...
-
Article
Open AccessNovel and accurate non-linear index for the automated detection of haemorrhagic brain stroke using CT images
Brain stroke is an emergency medical condition which occurs mainly due to insufficient blood flow to the brain. It results in permanent cellular-level damage. There are two main types of brain stroke, ischemic...
-
Chapter and Conference Paper
Design and Analyzing Vibration with Acoustic—Structural Coupling of Muffler for Four-Stroke Diesel Engine
Muffler is one of the important devices in the exhaust system. This plays a key role in reducing the exhaust gas noise and pressure, before when they are expelled from the exhaust system. This noise comes from...
-
Article
Rational design of SnO2 nanoflakes as a stable and high rate anode for lithium-ion batteries
The SnO2 nanoflakes were prepared by simple one-step facile microwave-assisted solvothermal synthesis. The as-prepared SnO2 nanoflakes were systematically studied using X-ray diffraction (XRD), field emission sca...
-
Article
Comparative performance and emission studies of the CI engine with Nodularia Spumigena microalgae biodiesel versus different vegetable oil derived biodiesel
Biodiesel is a renewable diesel fuel that can be burned in any unmodified diesel engine at any concentration. Biodiesel from Nodularia Spumigena microalgae produced by transesterification is used in the presen...
-
Chapter and Conference Paper
Computational Modeling and Analysis of Intake Taper Manifold of an Internal Combustion Engine
The intake manifold is a key part of an i.c engine to feed the input air. It maybe a casting or fabricated of relatively light material. The air passes through the passage and enters into cylinder, due to bent...
-
Chapter and Conference Paper
Heat Transfer Enhancement with Different Nanofluids in Heat Exchanger by CFD
Nanofluids play a prominent role in heat transfer applications. The thermophysical phenomenon is additionally necessary for these fluids. Many researchers’ have been measured these fluids, in terms of preparat...
-
Article
Enhanced energy storage performance of nanocrystalline Sm-doped CoFe2O4 as an effective anode material for Li-ion battery applications
A simple modified combustion method was demonstrated in the development of cobalt ferrite (CoFe2O4) and samarium (Sm)-doped CoFe2O4 nanostructures. The Sm3+-doped CoFe2O4 can significantly affect their crystallit...
-
Article
Efficiency and economic optimization of shell and tube heat exchanger using bacteria foraging algorithm
Shell and tube heat exchanger (STHE) is widely used in the industries for various purposes due to its capacity to withstand pressure. STHE has the drawback of more cost and lower efficiency. Many existing meth...
-
Article
Optimal laser welding process parameters and expected weld bead profile for P92 steel
P92 steel is classified as one of the creep strength enhanced ferritic steels, whose welding plays a crucial role in power industries. The best choice for such materials is the laser welding in open atmosphere...
