171 Result(s)
within
Conference Paper
Yu** Zhou
Characterization and Evaluation of Materials
-
Chapter and Conference Paper
Laser Ablation of Thin Films for Flexible Sensor Manufacturing
This study investigates a mask-free and inkless method using nanosecond pulsed UV laser ablation for sensor manufacturing. This method greatly simplifies the patterning process into a single step and allows fo...
-
Chapter and Conference Paper
Analysis of Solidification and Thermal-Mechanical Behaviors in Continuous Casting
(CC) is the most utilized making process today, but knowledge on the many complex phenomena that occur within the process could be gained. Issues such as transient flow patterns and immoderate amounts of ...
-
Chapter and Conference Paper
Characterization and Metallurgical Performance of Titangarnet
(Ca3Fe2Si1·58Ti1·42O12), mineral phase in sinter with vanadium–titanium magnetite (VTM), was rarely investigated on its strength and . In this study, high purity (95%) of was firstly prepared by chemica...
-
Chapter and Conference Paper
Heterogeneous Grain Microstructure Reducing/Eliminating Edge Breaks in Low Carbon Steels
initiating at both edges of steel strip are strain lines/ which are unacceptable for surface critical and semi-critical applications. Some steel manufacturers are using de-gassing technology by producing i...
-
Chapter and Conference Paper
The Effect of the Addition of Cobalt Powder on Compressive Properties of Porous Titanium as Bone Substitute Materials
is considered as a potential bone substitute because of its good biocompatibility. In the preparation of , and can be distributed evenly in the matrix of with as an element. Such intermetallic ...
-
Chapter and Conference Paper
Activated Carbon Prepared from Bituminous Coal/Poplar Blends by Direct KOH Activation
(ACs) prepared from the / using KOH as an agent by varying the mass ratio ( / and KOH/carbon materials). The specific 2D-NLDFT surface area and total volume of the prepared ACs are in the ran...
-
Chapter and Conference Paper
Integrating Fluid Simulation with Virtual Die Casting Machine for Industry 4.0 and Operator Training
High Pressure is a complex manufacturing process in which molten metal is forced into a mold cavity under high pressure where it then cools and solidifies. An interactive virtual simulator is being develop...
-
Chapter and Conference Paper
Study on the Interaction Process Between Mold Flux and TiN/TiO2 by Sessile Drop Method
The interfacial property is the key factor to determine the solubility and of solid inclusions by in the process. In this study, the interfacial interactions between droplet and , substrates were in...
-
Chapter and Conference Paper
Analysis of Chemical Activity of Bismuthene in the Presence of Environment Gas Molecules by Means of Ab Initio Calculations
Recent activity in the investigation of new materials with reduced dimensionality resulted in the emergence of interest to two‐dimensional (2D) monoelemental structures, such as monolayer phosphorus, arsenic, ...
-
Chapter and Conference Paper
Magnetite Carbon-Free Sintering Process Based on Electromagnetic Induction
The existing process is to add a certain proportion of water to the raw materials such as ore powder, coke powder, and quicklime. After and pelletizing, the raw materials are sintered on the pallet tra...
-
Chapter and Conference Paper
Prediction of Iron Ore Sinter Strength Using Statistical Technique
Sinter is the main -containing raw material for blast furnaces. As ore resources are gradually depleted, the types of raw materials for sinter are complicated, so their chemical composition often changes. A...
-
Chapter and Conference Paper
A Study of Processing High-Grade Magnetite Concentrates by Combination of Magnetic Separation and Reverse Flotation Separation to Prepare Raw Materials for Ferrite Magnet
Permanent magnets (PM) are critical components for electric motors and power generators. Non-rare earth (non-RE) PMs typically have small supply risks and low cost compared to rare earth element (REE) PMs. The...
-
Chapter and Conference Paper
Numerical Simulation and Optimization of Temperature Field in the Baking of RH Vessel
In order to optimize the of , of gas flow, combustion and heat transfer in vacuum vessel during the process was conducted. The FLUENT code with finite volume and SIMPLEC methods was adopted to investiga...
-
Chapter and Conference Paper
Research Progress of RIOHTRACK in China
For the purposes of develo** long-life pavements in China, in 2015. The Research Institute of Highway Ministry of Transport built a 2.038 km full-scale field pavement testing road named RIOHTRACK. The RIOHTR...
-
Chapter and Conference Paper
Non-isothermal Carbothermic Reduction Kinetics of Calcium Ferrite
the ideal bonding phase with superior strength and reducibility in the iron ore process. In present study, the of CaO · with graphite was studied by a non-isothermal method using thermo-gravimet...
-
Chapter and Conference Paper
Microscopic Appearance Transformation of Bornite During Acid Leaching and Bioleaching
transformation of during and was investigated in this article. experiments, ), (SEM), and energy dispersive spectrometer (EDS) were conducted to investigate the microscopic appearance of in...
-
Chapter and Conference Paper
The Process Parameters Extended Criterion for Laser Engineered Net Sha** of Inconel 738
processing has been an efficient technique for the rapidly manufacturing superalloy parts in recent years. While, for the high crack susceptibility superalloy such as Inconel 738 , the current flawless p...
-
Chapter and Conference Paper
Modification of Inclusions by Adding Mg to 16MnCrS5 Gear Steel
The strength, ductility, and cutting performance can be seriously affected by the size and distribution of in the . Using a tube electric resistance furnace, the effect of Mg addition on the evolution of ...
-
Chapter and Conference Paper
Real-Time Imaging of Melting and Crystallization of Synthetic Ferronickel Slags with Varying B2O3 Content
the production of mineral wool, the and behaviors of are the key issues to determine the final quality of mineral wool. In this study, three with different B2O3 contents have been prepared, and the eff...
-
Chapter and Conference Paper
Temperature Correction Method of Deflection Basin and Stress/Strain Response of Asphalt Pavement
Temperature and load have coupling effect on FWD deflection basin and stress/strain response of asphalt pavement. To get comparable results, and analyze the influence of load on FWD deflection basin and stress...
