Search
Search Results
-
Solid State Reduction Driven Synthesis of Mn Containing Multi-principal Component Alloys
In recent years, high entropy alloys (HEAs), also known as multi-principal component alloys (MPCAs) have emerged as a new and exciting class of...
-
A Novel Method to Deposit Vanadium Carbide Interlayer on Tool Steel Substrate Applied to Mitigate CVD Diamond Thermal Stresses
This work shows considerable advance in combining the exceptional properties of chemical vapor deposition (CVD) diamond with the toughness of steel,...
-
Microstructural Characterization of Dual-Phase Low-Carbon Steel as Function of Inter-critical Annealing
Ferritic-martensitic low-carbon steels can be produced by inter-critical treatment with fast cooling, and are commonly referred to as dual-phase...
-
Undercooling and Cracking During Solidification
How the solid fraction f S increases with decreasing temperature T during solidification, i.e ., the f S ( T ) of an alloy, can play a critical role in its...
-
Numerical Investigation of Particle Size on the Performance of Ironmaking Blast Furnace
Coke and ore sizes are important to the efficiency and stability of blast furnace (BF) operation in practice. However, their selection is usually...
-
Shrinkage Investigation of Ductile Iron Castings
It has been a challenging mission to assure that ductile iron castings meet customer internal soundness specifications with acceptable process...
-
Tackling Structured Knowledge Extraction from Polymer Nanocomposite Literature as an NER/RE Task with seq2seq
There is an urgent need for ready access to published data for advances in materials design, and natural language processing (NLP) techniques offer a...
-
Effect of Annealing Time on the Microstructure, Mechanical and Dam** Properties of an As-Rolled ZK60 Alloy
The effects of different annealing times on the microstructure, mechanical and dam** properties of a rolled state ZK60 alloy were investigated. The...
-
Machine Learning Combining High-Temperature Experiments for the Prediction of Wetting Angle of Mold Fluxes
Direct measurement of the wetting angles of the mold fluxes is a strenuous work and time-consuming, and a mathematical model relating the wetting...
-
In Vitro and In Vivo Degradation of the New Dissolvable Surgical Wire, Produced from Zn Based Low Alloy by Hot and Cold Drawing
The biocorrosion of a new surgical wire (0.6, 0.8, and 1.0 mm in diameter) obtained from a ZnMg0.004 alloy by hot and cold drawing was characterized...
-
Cellulose, graphene and graphene-cellulose composite aerogels and their application in water treatment: a review
Due to their unique properties such as outstanding specific surface areas, aerogels can potentially offer a cost-effective and efficient water and...
-
-
Residual Stress Measurement of Laser Powder Bed Fusion Additively Manufactured Hastelloy-X Through Crystal Plasticity Simulations and Neutron Diffraction Experiments
The laser powder bed fusion additive manufacturing (LPBF-AM) technique enables the production of near-net-shaped metal components, but the...
-
Significant Microstructure Refinement and Improved Mechanical Properties of Mg2Si/Al Composites Induced by Nanoscale TiB2 Particles
Aluminum matrix composite have shown the great prospects in improving service performance and life of high-end equipment under harsh conditions due...
-
Influence of Genesis on Mechanochemical Activation and Reactivity of Boehmite Prepared by Thermal and Hydrothermal Transformation of Gibbsite
The focus of this paper is on the mechanical activation and reactivity of boehmite ( γ -AlOOH) synthesized by thermal transformation (B-TH) and...
-
Development of Microstructure in Aluminum Single Crystal During Complex Shearing of Extruded Tube
The development of the microstructure during severe plastic deformation of an aluminum single crystal by complex shearing of the extruded tube (CSET)...
-
Determination of the Residual Life of a Plate with a System of Cracks Under the Action of Long-Term Static Load and Corrosive Environment
Using the energy approach, a calculation model was built to determine the period of subcritical growth of a system of cracks in metal plates,...
-
Inorganic Cs3Bi2I9 lead-free halide perovskite film for large-area X-ray detector via low-cost ambient spray coating
Lead-free Cs 3 Bi 2 I 9 single crystals have been demonstrated to be promising materials for direct X-ray detectors with remarkable performance. However,...
-
-
Towards Integration of Ni-Slag Cleaning Process and Lithium-Ion Battery Recycling for an Efficient Recovery of Valuable Metals
Spent lithium-ion batteries (SBs) are important sources of valuable and critical raw materials. An integration of battery recycling with...