Search
Search Results
-
Advantages of stereolithographic 3D printing in the fabrication of the Affiblot device for dot-blot assays
In stereolithographic (SLA) 3D printing, objects are constructed by exposing layers of photocurable resin to UV light. It is a highly user-friendly...
-
Enhanced tribology properties induced by eutectic microstructure strengthening and in-situ reinforcing in laser cladded composite coating
With the development of laser deposition technology, the Invar alloy matrix materials is a kind of potential laser deposited coating because of low...
-
Microstructure Evolution and Corrosion Resistance Evaluation of 17-4 Precipitation Hardening Stainless Steel Processed by Laser Powder Bed Fusion
Precipitation hardening (PH) martensitic stainless steels, such as 17-4, have been investigated for use in additive manufacturing (AM) techniques to...
-
Investigation of the structure and bioactivity of several borate glasses
There is great interest in the development of bioactive borate glasses as they have a higher dissolution rate than their silicon-based counterparts....
-
Oil-Pressure Based Apparatus for In-Situ High-Energy Synchrotron X-Ray Diffraction Studies During Biaxial Deformation
BackgroundUnderstanding biaxial loading response at the microstructural level is crucial in hel** better design sheet manufacturing processes and...
-
Influence of the Geometry of Cast Products on Orientation of Dendritic Crystals Growth and Formation of Hot Cracks
The results of studies of hot cracks formed in cast shapes from low-alloy steel G21Mn5 are presented. Macroand microstructural analyses are carried...
-
Facile hydrothermal synthesis of ZnFe2O4@ZnO@RGO ternary nanocomposite photocatalysts with superior photocatalytic activity
New ternary nanocomposites for photocatalysis, composed of ZnFe 2 O 4 @ZnO@rGO, were synthesised in this work using a straightforward hydrothermal...
-
Evaluation and thermodynamic optimization of phase diagram of lithium niobate tantalate solid solutions
The lithium niobate–lithium tantalate solid solution’s phase diagram was investigated using experimental data from differential thermal analysis...
-
Microstructural Characterization of Dual-Phase Low-Carbon Steel as Function of Inter-critical Annealing
Ferritic-martensitic low-carbon steels can be produced by inter-critical treatment with fast cooling, and are commonly referred to as dual-phase...
-
Effect of Normalizing Treatment on Microstructure and Mechanical Properties of Non-oriented Fe-3.0% Si Steel
This study focuses on the microstructure evolution of non-oriented silicon steel for the drive motor iron core of new energy vehicles. The Fe-3.0% Si...
-
Emerging magnetic materials for electric vehicle drive motors
Increasing demand for electric vehicles (EVs) is increasing demand for the permanent magnets that drive their motors, as approximately 80% of modern...
-
Rheological and light scattering analyses for characterizing phase separation of polymer solutions in lithium-ion battery separator coating system
Nonsolvent-induced phase separation is a widely used technique in the manufacture of polymeric separators. This method involves fine-tuning porous...
-
Impact of SOFC anode carbon deposition and hydrogen adsorption on the cell performance by molecular simulation
ContextThis study primarily investigates the changes in carbon adsorption capacity and hydrogen adsorption capacity on the anode catalyst surface...
-
The preparation of CONC/AC mesoporous materials based on artificial nano-compartment based on activated carbon holes and catalytic activation of peroxymonosulfate for ciprofloxacin degradation
Owing to the inspiration from microreactors, mesoporous Co 3 O 4 nano-particle/carbon nitride/activated carbon (CONC/AC) was prepared via artificial...
-
Synthesis of Azo-BE: nonlinear optical properties studies at visible, cw, laser beams
4-((6-Methylbenzo[d]thiazol-2-yl)diazenyl)phenyl 4-chlorobenzoate(Azo-BE) is synthesized and characterized using 1 HNMR and 13 CNMR, mass spectra,...
-
Study of surface roughness based opto-mechanical properties of chlorobutyl (CIIR)/natural rubber (NR) 70/30 filled with different contents of hybrid (CB/CN) using time domain terahertz spectroscopy
The paper reports the study of surface roughness based opto-mechanical properties of Chlorobutyl (CIIR)/Natural Rubber (NR) 70/30 polymers filled...
-
Investigation on the structural, spectral and third-order nonlinear optical characteristics of cytosinium dihydrogen monophosphate crystal
Good quality semiorganic single crystals of cytosinium dihydrogen monophosphate (CDHMP) have been grown by slow evaporation solution growth technique...
-
Forced Bending Vibrations of a Plane Rod Fixed on a Rigid Support Element of Finite Length Under the Action of an External Transverse Force Aplied to Its Free End
The problem of forced bending vibrations of a plane rod with a finite-length fastening section under the action of an external transverse force at...
-
Multifaceted analysis of copper-doped cadmium selenide thin films: exploring crystallography data, opto-electrical properties, and thermoelectric power
The utilization of dip coating methods enabled the preparation of thin films of copper-doped cadmium selenide. Notably, improvements in cadmium...
-
Development of a shear creep damage model of jointed rock masses considering the influence of freeze-thaw and chemical corrosion
To conduct a more realistic numerical simulation analysis of jointed rock mass engineering in cold regions, shear creep tests were conducted on the...