Search
Search Results
-
Experimental investigation on the anisotropy of friction property for dry and water-saturated rock
Friction properties of rock are closely connected with the anisotropy. The anisotropy of rock friction can provide a valuable assessment for...
-
Subsurface deformation mechanism and the interplay relationship between strength–ductility and fretting wear resistance during fretting of a high-strength titanium alloy
Fretting wear damage of high-strength titanium fasteners has caused a large number of disastrous accidents. Traditionally, it is believed that both...
-
Using fused filament fabrication to improve the tribocorrosion behaviour of 17-4 PH SS in comparison to other metal forming techniques
Fused filament fabrication (FFF) is one of the additive manufacturing processes which has gained more interest because of its simplicity and...
-
The effect of friction block hole configurations on the brake tribological performance of high-speed trains
Three triangular friction block configurations are commonly employed in high-speed train brake systems, namely, unperforated, perforated...
-
Microstructure and mechanical properties of transient liquid phase bonding Ti3SiC2 ceramic to SUS430 steel using an Al interlayer
Ti 3 SiC 2 ceramic and SUS430 ferritic stainless steel were welded by the transient liquid phase (TLP) diffusion bonding method using an Al interlayer...
-
Polymer transfer film formation from cryogenic to elevated temperatures
This study reports on the tribological performance of aromatic thermosetting co-polyester (ATSP) and polyether ether ketone (PEEK)-based polymer...
-
Biomimetic lubricant-grafted surfaces on laser-textured microwell arrays with multifunctionality
Recently, various slippery liquid-infused porous surfaces (SLIPS) have been fabricated for the protection of various materials. However, these SLIPSs...
-
Friction as energy dissipation process associated with superlubricity of solids
The paper shows that work in a quantum system is quantized with energy; the quantum work is equivalent to the highest eigenenergy (the Debye energy)...
-
State of the art of lightweight aggregates used in lightweight refractories for working lining of high-temperature furnaces
Lightweight refractories for the working lining of high-temperature furnaces play an important role in the smelting of advanced steels and...
-
Theoretical and experimental research on static stiffness, performance, and lift-off characteristics of multi-layer gas foil thrust bearings
In this study, a new comprehensive fully coupled elastic-hydrodynamic model is developed for a multi-layer gas foil thrust bearing (GFTB). The...
-
Numerical simulation and experimental investigation of manufacturing route of directional casting super slab
We proposed a new technique route of directional solidification for the manufacture of super slab. A 7-t laboratory-scale thick slab was casted and...
-
Effect of phase content on deformation compatibility in ferrite and bainite dual-phase steel: experimental and crystal plasticity finite element analysis
The phase volume fraction has an important role in the match of the strength and plasticity of dual phase steel. The different bainite contents...
-
New electromagnetic variable flow device for slab continuous casting mold: mechanical design and magnetic field analysis
Obtaining a reasonable mold flow field for casting slabs with different sections is challenging by solely modifying the nozzle structure and...
-
Phase equilibria of Fe3O4–Cr2O3–CaO system: experimental measurements and thermodynamic calculations
Understanding the phase equilibria of the Fe 3 O 4 –Cr 2 O 3 –CaO system is essential for the efficient recycling of stainless steel pickling sludge. The...
-
Revealing dislocation activity modes during yielding and uniform deformation of low-temperature tempered steel by acoustic emission
The distinctive distribution of acoustic emission (AE) characteristic parameters generated during tensile testing of low-temperature tempered AISI...
-
Effect of MgO on structure and crystallization behavior of CaO–SiO2–Al2O3 inclusions in Si–Mn deoxidized steel
To avoid coarse crystallization of glassy inclusions in Si–Mn deoxidized steel during hot rolling, the effect of MgO on the structure and...
-
Inclusion characteristics and acicular ferrite formation
The effect of adding MgO nanoparticles (0%, 0.01%, 0.05%, and 0.10%) on the inclusion and acicular ferrite (AF) formation in 1.8%Ni low carbon...
-
Understanding and probing progression of localized corrosion on inner walls of steel pipelines: an overview
Corrosion poses a major threat to the safety of transportation pipelines. Therefore, it is crucial to have an in-depth understanding of corrosion...
-
Non-adhesive and adhesive contacts of an elastic quarter-or eighth-space with freely sliding sides
The contact of an elastic quarter- or eighth-space is studied under the condition that the movement of the side surface of the quarter-space is...
-
Influence of cooling rate upon weld metal microstructural evolution behaviors of EH36 shipbuilding steel
Microstructural evolution features have been systematically investigated for the weld metal of EH36 shipbuilding steel under an in situ confocal...