Abstract
A certain cabin door needs an actuator for speed buffering during normal operation. During emergency operation, the door movement speed is controlled and stabilized to a certain speed after a certain time. In this paper, simulink and the motion module in LMS Virtual Lab were used to co-simulate the working conditions involved in normal operation and the gas, liquid and mechanical movements involved in emergency operation. The influence of high and low temperature on gas and liquid was considered, and the sensitivity of dam** to speed was integrated to verify the design parameters. The risk of physical iteration is reduced, the parameters are optimized in advance, and the structure is improved, which provides an effective means for the design of emergency actuator system.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yao X, Deng J, Feng Y (2017) The doors design of transport airplane. National Defense Industry Press, Bei**g (in Chinese)
Zhang Y, Song B, Xue H (2010) Advances in simulation for civil aircraft emergency evaluation. Adv Aeronaut Sci Eng 1(1):55–61 (in Chinese)
FAA (1990) 2010 uniform distribution of exits: AC25-783-1A. Department of Transportation, USA
Liu Z (2015) Research on the commercial aircraft overwing emergency exit door’s opening and operating mechanisms. Harbin Institute of Technology
Zhong S, Wang M (2017) Simulatiton of opening and closing for passenger door based on motion view/motion solve. In: 2017 Altair technical conference
Niu C (2008) Airframe structural design. Aviation Industry Press, Bei**g (in Chinese)
Li X, Luo Z, Yu J (2017) MATLAB/Simulink system simulation. 1st Tsinghua University Press, Bei**g
Yu T (2017) LMS virtual lab motion advanced and case tutorials. Northwestern Polytechnical University Press. **’an
Wan X, Liu L (2010) LMS virtual lab motion introduction and improvement. Northwestern Polytechnical University Press. **’an
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Zheng, W., Pang, H., Zhi, W., Xu, Y. (2024). Study on Dynamic Analysis Method of Emergency Door Opening Process. In: Rui, X., Liu, C. (eds) Proceedings of the 2nd International Conference on Mechanical System Dynamics. ICMSD 2023. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-99-8048-2_3
Download citation
DOI: https://doi.org/10.1007/978-981-99-8048-2_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-8047-5
Online ISBN: 978-981-99-8048-2
eBook Packages: EngineeringEngineering (R0)