Abstract
Currently, researchers usually measure convective heat transfer coefficient (h) of nanofluids through the in-pipe transient measurement method. The principle is introduced as follows. A hot water source is applied to form periodic changes of temperature of the testing fluid and make the testing fluid flow through the testing cooper pipe at a low speed.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wang, Y., Li, C., Zhang, Y., Yang, M., Li, B., Dong, L., & Wang, J. (2018). Processing characteristics of vegetable oil-based nanofluid MQL for grinding different workpiece materials. International Journal of Precision Engineering and Manufacturing-Green Technology, 5(2), 327-339.
Yang W C, Zhou Y, Zhang J, Liu H, et al. Role of radiative and convective heat transfer during heating of an ingot product in a tubular furnace: experiment and simulation. Journal of Iron and Steel Research International, 2022, 29:(12):1978–1985.
Wang L, Liu Q S. Transient Heat Transfer Characteristics of Twisted Structure Heated by Exponential Heat Flux (vol 9, 771900, 2021). Frontiers in Energy Research, 2022, 10:2.
Wan Z P, Hu X S, Wang X W, et al. Experimental study on the boiling/condensation heat transfer performance of a finned tube with a hydrophilic/hydrophobic surface. Applied Thermal Engineering, 2023, 229:12.
Uddin M, Gurgenci H, Klimenko A, et al. Heat transfer analysis of supercritical CO2 in a High-Speed turbine rotor shaft cooling passage. Thermal Science and Engineering Progress, 2022, 39:10.
Shen Z J, Min J C. Non-equilibrium thermodynamic analysis of coupled heat and moisture transfer across a membrane. Chinese Journal of Chemical Engineering, 2022, 44:497-506.
X. Cui, C.H. Li, W.F. Ding, Y. Chen, C. Mao, X.F. Xu, B. Liu, D.Z. Wang, H.N. Li, Y.B. Zhang, Z. Said, S. Debnath, M. Jamil, H. Muhammad Ali, S. Sharma, Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: from mechanisms to application, Chinese Journal of Aeronautics, 2022, 35(11):85.112.
Lushchik V G, Makarova M S, Reshmin A I. Double-Pipe Heat Exchanger with Diffuser Channels. High Temperature, 2022, 60(SUPPL 2):S215.S222.
Kiseev V M, Sazhin O V. Heat Transfer Enhancement in Two-Phase Systems with Capillary Pumps. Technical Physics, 2022, 67(2):136-145.
Solnechnyi E M, Cheremushkina L A. Dynamic Properties of a One-Dimensional Heat Transfer System with a Moving Heat Source. Autom Remote Control, 2022, 83(8):1172-1179.
Wang L, Cheng Q L, Sun W, et al. Study on the Exergy Transfer Characteristics of the Heat Transfer Process of the Tube Heating Furnace. Journal of Thermal Science and Engineering Applications ,2023, 15(4):13.
Xu B W, Lia J W, Lu N X, et al. Experimental study on heat transfer characteristics of high-temperature heat pipe. Thermal Science 26(6):5227–5237.
Zhang M, Sun B. Improved Heat-Transfer Correlation for Transcritical Methane Based on a Velocity Profile Correction Term. Journal of Thermal Science and Engineering Applications, 2023, 14(4):9.
Ali M R, Al-Khaled K, Hussain M, et al. Effect of design parameters on passive control of heat transfer enhancement phenomenon in heat exchangers-A brief review. Case Studies in Thermal Engineering, 2023, 43:19.
Mingzheng Liu, Changhe Li, Yanbin Zhang, Min Yang, Teng Gao, **n Cui, **aoming Wang, Haonan Li, Zafar Said, Runze Li and Shubham Sharma, Analysis of grain tribology and improved grinding temperature model based on discrete heat source, Tribology International, (2022). https://doi.org/10.1016/j.triboint.2022.108196.
Min Yang, Changhe Li, Yanbin Zhang, Yaogang Wang, Benkai Li, Dongzhou Jia, Yali Hou, Runze Li. Research on microscale skull grinding temperature field under different cooling conditions. Applied Thermal Engineering, 2017, 126: 525.537.
Li L, Zhang Y, Ma H, et al. An investigation of molecular layering at the liquid-solid interface in nanofluids by molecular dynamics simulation[J]. Physics Letters A, 2008, 372 (25): 4541-4544.
Yang, M., Li, C., Zhang, Y., Jia, D., Li, R., Hou, Y., & Cao, H. (2019). Effect of friction coefficient on chip thickness models in ductile-regime grinding of zirconia ceramics. The International Journal of Advanced Manufacturing Technology, 102(5), 2617-2632.
Du X C, Li W T, Zhang X R, et al. Experimental Research on the Flow and Heat Transfer Characteristics of Subcritical and Supercritical Water in the Vertical Upward Smooth and Rifled Tubes. Energies, 2023, 15(21):22.
He R D, Wang Z M, Dong F. Influence of heat-transfer surface morphology on boiling-heat-transfer performance. Heat and Mass Transfer, 2022, 58(8):1303-1318.
Min Yang, Changhe Li, Zafar Said, Yanbin Zhang, Runze Li, Sujan Debnath, Hafiz Muhammad Ali, Teng Gao, Yunze Long. Semiempirical heat flux model of hard-brittle bone material in ductile microgrinding, Journal of Manufacturing Processes, 2021, 71: 501-514.
Yang, M., Li, C., Luo, L., Li, R., & Long, Y. (2021). Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling. International Communications in Heat and Mass Transfer, 125, 105317.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Li, C. (2024). Design and Experimental Evaluation of Convective Heat Transfer Coefficient Test System in Nanofluids Spray Cooling. In: Thermodynamic Mechanism of MQL Grinding with Nano Bio-lubricant. Springer, Singapore. https://doi.org/10.1007/978-981-99-6265-5_5
Download citation
DOI: https://doi.org/10.1007/978-981-99-6265-5_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-6264-8
Online ISBN: 978-981-99-6265-5
eBook Packages: EngineeringEngineering (R0)