Abstract
Functionally graded material (FGM) plate is usually exposed to a thermal environment, and their mechanical behaviour under temperature loads is of great importance to the research community. Therefore, the objective of the current investigation is to study the impact of porosity and temperature loads on the buckling characteristics of FGM plates. The effective material properties of porous FGM plates are found using modified power law distributions, and the porosity defects are accounted for in this study as criteria of stiffness reduction. The buckling responses of porous FGM plates are investigated by incorporating four types of different porosity distributions. The analysis is carried out using the Finite Element (FE) technique. The accuracy of the current formulation is authenticated by comparing the present results obtained with analytical results existing in the literature. After the validation, the influence of several significant parameters such as the porosity, the volume fraction exponent, side-thickness ratio, support conditions and aspect ratio on buckling responses of the porous FGM plate under temperature loads is evaluated. Results showed that the buckling response of the FGM plate is substantially affected by porosity and temperature loads.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Mota AF, Loja MAR, Barbosa JI, Rodrigues JA (2020) Porous functionally graded plates: An assessment of the influence of shear correction factor on static behavior. Math Comput Appl 25:25. https://doi.org/10.3390/mca25020025
Singha MK, Prakash T, Ganapathi M (2011) Finite element analysis of functionally graded plates under transverse load. Finite Elem Anal Des 47:453–460. https://doi.org/10.1016/j.finel.2010.12.001
Zhang DG, Zhou YH (2008) A theoretical analysis of FGM thin plates based on physical neutral surface. Comput Mater Sci 44:716–720. https://doi.org/10.1016/j.commatsci.2008.05.016
Farzam-Rad SA, Hassani B, Karamodin A (2017) Isogeometric analysis of functionally graded plates using a new quasi-3D shear deformation theory based on physical neutral surface. Compos Part B Eng 108:174–189. https://doi.org/10.1016/j.compositesb.2016.09.029
Lee Y, Bae S, Kim J (2016) Thermal buckling behavior of functionally graded plates based on neutral surface. Compos Struct 137:208–214. https://doi.org/10.1016/j.compstruct.2015.11.023
Van Do T, Doan DH, Duc ND, Bui TQ (2017) Phase-field thermal buckling analysis for cracked functionally graded composite plates considering neutral surface. Compos Struct 182:542–548. https://doi.org/10.1016/j.compstruct.2017.09.059
Arefi M, Mohammad-Rezaei Bidgoli E, Zenkour AM (2019) Free vibration analysis of a sandwich nano-plate including FG core and piezoelectric face-sheets by considering neutral surface. Mech Adv Mater Struct 26:741–752. https://doi.org/10.1080/15376494.2018.1455939.
Saad M, Hadji L (2022) Thermal buckling analysis of porous FGM plates. Mater Today Proc 53:196–201. https://doi.org/10.1016/j.matpr.2021.12.550
Kiran MC, Kattimani SC, Vinyas M (2018) Porosity influence on structural behaviour of skew functionally graded magneto-electro-elastic plate. Compos Struct 191:36–77. https://doi.org/10.1016/j.compstruct.2018.02.023
Ebrahimi F, Jafari A, Barati MR (2017) Free vibration analysis of smart porous plates subjected to various physical fields considering neutral surface position. Arab J Sci Eng 42:1865–1881. https://doi.org/10.1007/s13369-016-2348-3
Swaminathan K, Hirannaiah S, Rajanna T (2022) Vibration and stability characteristics of functionally graded sandwich plates with/without porosity subjected to localized edge loadings. Mech Based Des Struct Mach 0:1–39. https://doi.org/10.1080/15397734.2022.2038619
Whitney JM, Pagano NJ (1972) Shear deformation in heterogeneous anisotropic plates. J Compos Mater 6:316–319. https://doi.org/10.1177/002199837200600214
Bathe KJ (2014) Finite element procedures, 2nd ed
Chandra SKS, Rajanna T, Rao KV (2020) A parametric study on the effect of elliptical cutouts for buckling behavior of composite plates under non-uniform edge loads. Lat Am J Solids Struct 17:1–15
Rajanna T, Banerjee S, Desai YM, Prabhakara DL (2016) Effects of partial edge loading and fibre configuration on vibration and buckling characteristics of stiffened composite plates. Lat Am J Solids Struct 13:854–879. https://doi.org/10.1590/1679-78252239
Swaminathan K, Sachin H, Rajanna T (2020) Buckling analysis of functionally graded materials by dynamic approach. Mater Today Proc 45:172–178. https://doi.org/10.1016/j.matpr.2020.10.412
Matsunaga H (2005) Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory. Compos Struct 68:439–454. https://doi.org/10.1016/j.compstruct.2004.04.010
Najafizadeh MM, Heydari HR (2004) Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory. Eur J Mech A/Solids. 23:1085–1100. https://doi.org/10.1016/j.euromechsol.2004.08.004
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Swaminathan, K., Sachin, H., Rajanna, T. (2024). Influence of Porosity and Temperature Load on Buckling Characteristics of Functionally Graded Material Plates. In: Velmurugan, R., Balaganesan, G., Kakur, N., Kanny, K. (eds) Dynamic Behavior of Soft and Hard Materials, Volume 3. IMPLAST 2022. Springer Proceedings in Materials, vol 36. Springer, Singapore. https://doi.org/10.1007/978-981-99-6259-4_12
Download citation
DOI: https://doi.org/10.1007/978-981-99-6259-4_12
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-6258-7
Online ISBN: 978-981-99-6259-4
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)