Abstract
Ultrasonic Power Transfer (UPT) technology has many advantages such as easy concentration of energy, no electromagnetic interference, and penetration of metal media, so it has great application prospects in wireless charging of underwater vehicles. The underwater vehicle during the charging process is affected by the complex marine environment, which will change the relative position, operating frequency and equivalent load of the UPT system, which in turn affects the stability, transmission power and efficiency of the system. Aiming at the above problems, this paper firstly uses the generalized state space averaging method (GSSA) to establish the state space model of the UPT system in the marine environment. Then, the uncertainty model of the system parameters is established on the basis of state space model considering the parameter perturbation of the operating frequency and equivalent load. A robust H∞ controller based on M-Δ feedback control structure is designed. Finally, it is verified by the simulation. When the input current of the system changes or the output disturbance occurs, the robust controller can make the output current track the reference input quickly without overshoot, and has a good suppression effect on the influence of parameter perturbation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Lin, D., Ning, X., Hu, P.: Review of ultrasonic coupled wireless power transmission technology. J. Unmanned Undersea Syst. 29(03), 257–264 (2021). (in Chinese)
Bahouth, R., Benmeddour, F., Moulin, E., Assaad, J.: Lamb wave wireless communication through healthy and damaged channels with symmetrical and asymmetrical steps and notches. IEEE Trans. Ultrason. 69(7), 2390–2399 (2022)
Aaltonen, T., Saarivirta, M., Kerminen, T., Grönman, J.: Implementation of a low-cost autonomous underwater vehicle using open source ROS components with consumer class sonar technologies. In: 2020 43rd International Convention on Information, Communication and Electronic Technology (MIPRO), pp. 1189–1194 (2020)
Mohsan, S.A.H. Khan, M.A. Mazinani, A. Alsharif, M.H. Cho, H.-S.: Enabling underwater wireless power transfer towards sixth generation (6g) wireless networks: opportunities, recent advances, and technical challenges. J. Mar. Sci. Eng. 10(9), 1282 (2022)
Cai, C., Zhang, Y., Wu, S., Liu, J., Zhang, Z., Jiang, L.: A circumferential coupled dipole-coil magnetic coupler for autonomous underwater vehicles wireless charging applications. IEEE Access 8, 65432–65442 (2020)
Zhao, Z.M., Zhang, Y.M., Chen, K.N.: Advances in magnetically coupled resonant wireless power transmission technology. Proc. CSEE 3(3), 2–13 (2013). (in Chinese)
Sherrit, S., Badescu, M., Bao, X., Bar-Cohen, Y., Chang, Z.: Efficient electromechanical network model for wireless acoustic-electric feed-throughs. Proc. SPIE Int. Soc. Opt. Eng. 5758, 362–372 (2005)
Mindykowski, D., Wandowski, T., Radzieński, M., Kudela, P.: Analysis of elastic wave propagation excited by acoustic non-contact method. In: Proceedings of the SPIE 11593, Health Monitoring of Structural and Biological Systems XV, vol. 115930T (2021)
Li, Y., Cui, J., Li, G., Liu, L., Zheng, Y., Zang, J., Xue, C.: An optimal design method for improving the efficiency of ultrasonic wireless power transmission during communication. Sensors 22(3), 727 (2022)
Leung, H.F., Willis, B.J., Hu, A.P.: Wireless electric power transfer based on acoustic energy through conductive media. In: 2014 9th IEEE Conference on Industrial Electronics and Applications, pp. 1555–1560 (2014)
Allam, A., Arrington, C.L., St. John, C., Steinfeldt, J., Erturk, A., El-Kady, I.: System-level DC-to-DC analysis and experiments of ultrasonic power transfer through metallic barriers. IEEE/ASME Trans. Mechatron., 1–11 (2022)
Fai, L., Dai, X., Hu, P.: Electrical modeling method for ultrasonic wireless power transfer System. Trans. China Electrotech. Soc. 30(19), 85–89 (2015). (in Chinese)
Liu, D.N.: Research on wireless power transfer technology of isolated metal media based on ultrasonic wave. Dalian University of Technology, pp. 48–50 (2015). (in Chinese)
Liu, Y.: Research on wireless power transfer system technology based on ultrasonic wave. Nan**g Univ. Aeronaut. Astronaut. 37–47 (2019). (in Chinese)
Chen, W., **ng, P., Yan, X.: Output voltage GSSA-MPC control of magnetic coupling resonant wireless power transfer system. Control. Eng. 29(01), 114–120 (2022). (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Zhang, K., Lan, B., Dai, F., Feng, J., Mao, Z. (2023). Robust Control of Ultrasonic Power Transfer System Under Parameter Perturbation. In: Ma, C., Zhang, Y., Li, S., Zhao, L., Liu, M., Zhang, P. (eds) The Proceedings of 2022 International Conference on Wireless Power Transfer (ICWPT2022). ICWPT 2022. Lecture Notes in Electrical Engineering, vol 1018. Springer, Singapore. https://doi.org/10.1007/978-981-99-0631-4_56
Download citation
DOI: https://doi.org/10.1007/978-981-99-0631-4_56
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-0630-7
Online ISBN: 978-981-99-0631-4
eBook Packages: EngineeringEngineering (R0)