SpringerLink
Log in

Applications

  • Chapter
  • First Online:
Powder Consolidation Using Cold Spray

Part of the book series: SpringerBriefs in Applied Sciences and Technology ((BRIEFSPOLIMI))

  • 691 Accesses

Abstract

In its current state, cold spray (CS) is increasingly used in a variety of industries for a number of applications, including the corrosion resistant repairs, surface restoration, manufacturing of sputtering targets, deposition of WC-Co for hard chrome replacement coatings, electrical and thermal conductive coatings, braze joint preparation and deposition of NiCrAlY bond coats for thermal barriers. As applications multiply, CS will continue to expand to other non-traditional applications such as photovoltaic, wind, medical and architectural applications, in particular because of the ability of CS to deposit materials without altering their properties. In this chapter the focus is on some emerging applications of CS. This includes repairing damaged parts in Sect. 4.1 and additive manufacturing in Sect. 4.2. Section 4.3 presents a new deposition window for CS at subcritical condition to obtain coatings with designed porosities. Porous coatings/cellular structures will open up a variety of new applications for CS including but not limited to: biomedical, mass transfer, shock/electromagnetic wave absorption, anti-friction coatings, etc.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Chapter
EUR 29.95
Price includes VAT (Germany)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
EUR 42.79
Price includes VAT (Germany)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
EUR 53.49
Price includes VAT (Germany)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free ship** worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. A. Moridi, Cold Spray Coating: Process Evaluation and Wealth of Applications; From Structural Repair to Bioengineering. Ph.D. thesis, 2015

    Google Scholar 

  2. V. Champagne, D. Helfritch, Critical assessment 11: structural repairs by cold spray. Mater. Sci. Technol. 31(6), 627–634 (2015)

    Article  Google Scholar 

  3. V.K. Champagne, The repair of magnesium rotorcraft components by cold spray. J. Fail. Anal. Prev. 8(2), 164–175 (2008)

    Article  Google Scholar 

  4. J.C. Lee, H.J. Kang, W.S. Chu, S.H. Ahn, Repair of damaged mold surface by cold-spray method. CIRP Ann. Manuf. Technol. 56(1), 577–580 (2007)

    Article  Google Scholar 

  5. H. Takana, H.Y. Li, K. Ogawa, T. Kuriyagawa, H. Nishiyama, Computational and experimental studies on cavity filling process by cold gas dynamic spray. J. Fluids Eng. Trans. ASME 132(2), 213021–213029 (2010)

    Article  Google Scholar 

  6. R. Jones, N. Matthews, C. Rodopoulos, K. Cairns, S. Pitt, On the use of supersonic particle deposition to restore the structural integrity of damaged aircraft structures. Int. J. Fatigue 33(9), 1257–1267 (2011)

    Article  Google Scholar 

  7. M. Guagliano, E. Riva, M. Guidetti, Contact fatigue failure analysis of shot-peened gears. Eng. Failure Anal. 9, 147–158 (2002)

    Article  Google Scholar 

  8. S.M. Hassani-Gangaraj, A. Moridi, M. Guagliano, Fatigue properties of a low-alloy steel with a nano-structured surface layer obtained by severe mechanical treatments. Key Eng. Mater. 577–578, 469–472 (2013)

    Article  Google Scholar 

  9. S.M. Hassani-Gangaraj, A. Moridi, M. Guagliano, A. Ghidini, M. Boniardi, The effect of nitriding, severe shot peening and their combination on the fatigue behavior and micro-structure of a low-alloy steel. Int. J. Fatigue 62, 67–76 (2013)

    Article  Google Scholar 

  10. S.M. Hassani-Gangaraj, A. Moridi, M. Guagliano, A. Ghidini, Nitriding duration reduction without sacrificing mechanical characteristics and fatigue behavior: The beneficial effect of surface nano-crystallization by prior severe shot peening. Mater. Design 55, 492–498 (2014)

    Article  Google Scholar 

  11. N. Habibi, S.M.H-Gangaraj, G.H. Farrahi, G.H. Majzoobi, A.H. Mahmoudi, M. Daghigh, A. Yari, A. Moridi, The effect of shot peening on fatigue life of welded tubular joint in offshore structure. Mater. Design 36, 250–257 (2012)

    Google Scholar 

  12. A. Moridi, M. Azadi, G.H. Farrahi, Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects. Surf. Coat. Technol. 243, 91–99 (2014)

    Article  Google Scholar 

  13. S. Gulizia, A. Trentin, S. Vezzù, S. Rech, P. King, M.Z. Jahedi, M. Guagliano, Characterisation of cold spray titanium coatings. Mater. Sci. Forum 656, 898–901 (2010)

    Article  Google Scholar 

  14. A. Ryabchikov, H. Lille, S. Toropov, J. Kõo, T. Pihl, R. Veinthal, Determination of residual stresses in thermal and cold sprayed coatings by the hole-drilling method. Mater. Sci. Forum 681, 171–176 (2011)

    Article  Google Scholar 

  15. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, On fatigue behavior of cold spray coating, MRS Proceedings, vol. 1650, pp. mrsf13–1650–jj05–03 (Cambridge University Press, 2014)

    Google Scholar 

  16. Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials 1. Tech. Rep. Reapproved, 2009

    Google Scholar 

  17. E. Sansoucy, G.E. Kim, A.L. Moran, B. Jodoin, Mechanical characteristics of Al-Co-Ce coatings produced by the cold spray process. J. Thermal Spray Technol. 16(5–6), 651–660 (2007)

    Article  Google Scholar 

  18. Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (e- N) Fatigue Data. tech. rep., 2012

    Google Scholar 

  19. H. Assadi, T. Schmidt, H. Richter, J.-O. Kliemann, K. Binder, F. Gärtner, T. Klassen, H. Kreye, On parameter selection in cold spraying. J. Thermal Spray Technol. 20(6), 1161–1176 (2011)

    Article  Google Scholar 

  20. M. Azadi, G.H. Farrahi, A. Moridi, Optimization of air plasma sprayed thermal barrier coating parameters in diesel engine applications. J. Mater. Eng. Perform. 22(11), 3530–3538 (2013)

    Article  Google Scholar 

  21. M. Azadi, A. Moridi, G.H. Farrahi, Optimal experiment design for plasma thermal spray parameters at bending loads. Int. J. Surf. Sci. Eng. 6(1), 3–14 (2012)

    Article  Google Scholar 

  22. A. Moridi, M. Azadi, G.H. Farrahi, Coating thickness and roughness effect on stress distribution of A356.0 under thermo-mechanical loadings. Proc. Eng. 10, 1372–1377 (2011)

    Article  Google Scholar 

  23. A. Moridi, M. Azadi, G.H. Farrahi, Numerical simulation of thermal barrier coating system under thermo-mechanical loadings. Proc. World Congress Eng. 3, 1959–1964 (2011)

    Google Scholar 

  24. G. Bae, Y. **ong, S. Kumar, K. Kang, C. Lee, General aspects of interface bonding in kinetic sprayed coatings. Acta Materialia 56(17), 4858–4868 (2008)

    Article  Google Scholar 

  25. M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset, D. Helfritch, Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process. Appl. Surf. Sci. 219(3–4), 211–227 (2003)

    Article  Google Scholar 

  26. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, S. Vezzu, Effect of cold spray deposition of similar material on fatigue behavior of Al 6082 alloy. Fract. Fatigue 7, 51–57 (2014)

    Google Scholar 

  27. M. Torres, An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel. Int. J. Fatigue 24(8), 877–886 (2002)

    Article  Google Scholar 

  28. S. Kikuchi, Y. Nakahara, J. Komotori, Fatigue properties of gas nitrided austenitic stainless steel pre-treated with fine particle peening. Int. J. Fatigue 32, 403–410 (2010)

    Article  Google Scholar 

  29. P. De la Cruz, M. Odén, T. Ericsson, Influence of plasma nitriding on fatigue strength and fracture of a B-Mn steel. Mater. Sci. Eng.: A 242, 181–194 (1998)

    Article  Google Scholar 

  30. A. Moridi, S.M. Hassani-Gangaraj, S. Vezzú, L. Trško, M. Guagliano, Fatigue behavior of cold spray coatings: the effect of conventional and severe shot peening as pre-/post-treatment. Surf. Coat. Technol. 283, 247–254 (2015)

    Article  Google Scholar 

  31. G.H. Farrahi, J.L. Lebrun, D. Couratin, Effect of shot peening on residual stress and fatigue life of a spring steel. Fatigue Fract. Eng. Mater. Struct. 18(2), 211–220 (1995)

    Article  Google Scholar 

  32. S. Wang, Y. Li, M. Yao, R. Wang, Compressive residual stress introduced by shot peening. J. Mater. Process. Technol. 73(1–3), 64–73 (1998)

    Article  Google Scholar 

  33. M. Guagliano, Relating Almen intensity to residual stresses induced by shot peening: a numerical approach. J. Mater. Process. Technol. 110(3), 277–286 (2001)

    Article  Google Scholar 

  34. J. Almen, P. Black, Residual Stresses and Fatigue in Metals (McGraw-Hill, New York, 1963)

    Google Scholar 

  35. S. Baiker, P. McIntyre, Shot Peening: A Dynamic Application and Its Future (Metal finishing news, 2009)

    Google Scholar 

  36. S.M.H. Gangaraj, M. Guagliano, G.H. Farrahi, An approach to relate shot peening finite element simulation to the actual coverage. Surf. Coat. Technol. 234, 39–45 (2014)

    Article  Google Scholar 

  37. SAE Standard J2277 Shot Peening Coverage, Developed by Surface Enhancement 660 Committee. tech. rep., 2003

    Google Scholar 

  38. S.M. Hassani-Gangaraj, A. Moridi, M. Guagliano, From conventional to severe shot peening to generate nanostructured surface layer: a numerical study. IOP Confer. Series: Mater. Sci. Eng. 63(1), 12038 (2014)

    Article  Google Scholar 

  39. M. Umemoto, Nanocrystallization of steels by severe plastic deformation. Mater. Trans. 44(10), 1900–1911 (2003)

    Article  Google Scholar 

  40. M. Umemoto, Y. Todaka, K. Tsuchiya, Formation of nanocrystalline structure in steels by air blast shot peening. Mater. Trans. 44(7), 1488–1493 (2003)

    Article  Google Scholar 

  41. K. Lu, J. Lu, Surface nanocrystallization (SNC) of metallic materials-presentation of the concept behind a new approach. J. Mater. Sci. Technol. 15, 193–197 (1999)

    Article  Google Scholar 

  42. D. Liu, B. Tang, X. Zhu, H. Chen, J. He, J.-P. Celis, Improvement of the fretting fatigue and fretting wear of Ti6Al4V by duplex surface modification. Surf. Coat. Technol. 116–119, 234–238 (1999)

    Article  Google Scholar 

  43. K. Kubiak, S. Fouvry, A. Marechal, J. Vernet, Behaviour of shot peening combined with WCCo HVOF coating under complex fretting wear and fretting fatigue loading conditions. Surf. Coat. Technol. 201(7), 4323–4328 (2006)

    Article  Google Scholar 

  44. D. Asquith, A. Yerokhin, J. Yates, A. Matthews, Effect of combined shot-peening and PEO treatment on fatigue life of 2024 Al alloy. Thin Solid Films 515(3), 1187–1191 (2006)

    Article  Google Scholar 

  45. Y. Kameyama, J. Komotori, Tribological properties of structural steel modified by fine particle bombardment (FPB) and diamond-like carbon hybrid surface treatment. Wear 263(7–12), 1354–1363 (2007)

    Article  Google Scholar 

  46. N. Yamauchi, K. Demizu, N. Ueda, T. Sone, M. Tsujikawa, Y. Hirose, Effect of peening as pretreatment for DLC coatings on magnesium alloy. Thin Solid Films 506–507, 378–383 (2006)

    Article  Google Scholar 

  47. A. Carvalho, H. Voorwald, Influence of shot peening and hard chromium electroplating on the fatigue strength of 7050–T7451 aluminum alloy. Int. J. Fatigue 29(7), 1282–1291 (2007)

    Article  Google Scholar 

  48. D. Asquith, A. Yerokhin, J. Yates, A. Matthews, The effect of combined shot-peening and PEO treatment on the corrosion performance of 2024 Al alloy. Thin Solid Films 516(2–4), 417–421 (2007)

    Article  Google Scholar 

  49. G. Majzoobi, J. Nemati, A. Novin, Rooz, G. Farrahi, Modification of fretting fatigue behavior of AL7075T6 alloy by the application of titanium coating using IBED technique and shot peening. Tribol. Int. 42(1), 121–129 (2009)

    Google Scholar 

  50. M. Benedetti, Bending fatigue behaviour of differently shot peened Al 6082 T5 alloy. Int. J. Fatigue 26(8), 889–897 (2004)

    Article  Google Scholar 

  51. W. Dixon, A. Mood, A method for obtaining and analyzing sensitivity data. J. Amer. Statis. Assoc. 43, 109–126 (1948)

    Article  MATH  Google Scholar 

  52. P. Wulf, W. Johannes, Shot peening of brittle materials - status and outlook. Mater. Sci. Forum 638–642, 799–804 (2010)

    Google Scholar 

  53. L. Murr, S. Gaytan, A. Ceylan, E. Martinez, J. Martinez, D. Hernandez, B. Machado, D. Ramirez, F. Medina, S. Collins, Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting. Acta Materialia 58(5), 1887–1894 (2010)

    Article  Google Scholar 

  54. R. Dehoff, S. Babu, Characterization of interfacial microstructures in 3003 aluminum alloy blocks fabricated by ultrasonic additive manufacturing. Acta Materialia 58(13), 4305–4315 (2010)

    Article  Google Scholar 

  55. D. Ramirez, L. Murr, E. Martinez, D. Hernandez, J. Martinez, B. Machado, F. Medina, P. Frigola, R. Wicker, Novel precipitatemicrostructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting. Acta Materialia 59(10), 4088–4099 (2011)

    Article  Google Scholar 

  56. S. Shimizu, H. Fujii, Y. Sato, H. Kokawa, M. Sriraman, S. Babu, Mechanism of weld formation during very-high-power ultrasonic additive manufacturing of Al alloy 6061. Acta Materialia 74, 234–243 (2014)

    Article  Google Scholar 

  57. I. Gibson, D.W. Rosen, B. Stucker, Additive Manufacturing Technologies (Springer, Boston, 2010)

    Book  Google Scholar 

  58. E. Atzeni, A. Salmi, Economics of additive manufacturing for end-usable metal parts. Int. J. Adv. Manuf. Technol. 62(9–12), 1147–1155 (2012)

    Article  Google Scholar 

  59. C. Emmelmann, P. Sander, J. Kranz, E. Wycisk, Laser additive manufacturing and bionics: redefining lightweight design. Physics Procedia 12(PART 1), 364–368 (2011)

    Google Scholar 

  60. N. Guo, M.C. Leu, Additive manufacturing: technology, applications and research needs. Front. Mech. Eng. 8(3), 215–243 (2013)

    Article  Google Scholar 

  61. W.E. Frazier, Metal additive manufacturing: a review. J. Mater. Eng. Perform. 23(6), 1917–1928 (2014)

    Article  Google Scholar 

  62. B. Vayre, F. Vignat, F. Villeneuve, Metallic additive manufacturing: state-of-the-art review and prospects. Mech. Indus. 13(2), 89–96 (2012)

    Article  Google Scholar 

  63. ASTM International, F2792-12a - Standard Terminology for Additive Manufacturing Technologies (2013)

    Google Scholar 

  64. D.C. Hofmann, S. Roberts, R. Otis, J. Kolodziejska, R.P. Dillon, J.-O. Suh, A.A. Shapiro, Z.-K. Liu, J.-P. Borgonia, Develo** Gradient Metal Alloys through Radial Deposition Additive Manufacturing. Scientific Reports 4, 5357 (2014)

    Google Scholar 

  65. J. Mazumder, D. Dutta, N. Kikuchi, A. Ghosh, Closed loop direct metal deposition: art to part. Optics Lasers Eng. 34(4–6), 397–414 (2000)

    Article  Google Scholar 

  66. R.R.P. Mudge, N.N.R. Wald, Laser engineered net sha** advances additive manufacturing and repair. Welding J.-Newyork 86(January), 44–48 (2007)

    Google Scholar 

  67. A.H. Nickel, D.M. Barnett, F.B. Prinz, Thermal stresses and deposition patterns in layered manufacturing. Mater. Sci. Eng. A 317(1–2), 59–64 (2001)

    Article  Google Scholar 

  68. P. Fischer, M. Locher, V. Romano, H.P. Weber, S. Kolossov, R. Glardon, Temperature measurements during selective laser sintering of titanium powder. Int. J. Mach. Tools Manuf. 44(12–13), 1293–1296 (2004)

    Article  Google Scholar 

  69. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, M. Dao, Cold spray coating: review of material systems and future perspectives. Surf. Eng. 30, 369–395 (2014)

    Article  Google Scholar 

  70. A. List, F. Gärtner, T. Schmidt, T. Klassen, Impact conditions for cold spraying of hard metallic glasses. J. Thermal Spray Technol. 21(3–4), 531–540 (2012)

    Article  Google Scholar 

  71. Y.Y. Zhang, X.K. Wu, H. Cui, J.S. Zhang, Cold-spray processing of a high density nanocrystalline aluminum alloy 2009 coating using a mixture of as-atomized and as-cryomilled powders. J. Thermal Spray Technol. 20, 1125–1132 (2011)

    Article  Google Scholar 

  72. L. Ajdelsztajn, B. Jodoin, G.E. Kim, J.M. Schoenung, Cold spray deposition of nanocrystalline aluminum alloys. Metallur. Mater. Trans. A: Phys. Metallur. Mater. Sci. 36(3), 657–666 (2005)

    Article  Google Scholar 

  73. A.C. Hall, L.N. Brewer, T.J. Roemer, Preparation of aluminum coatings containing homogenous nanocrystalline microstructures using the cold spray process. J. Thermal Spray Technol. 17(3), 352–359 (2008)

    Article  Google Scholar 

  74. D. Poirier, J.-G. Legoux, R.A.L. Drew, R. Gauvin, Consolidation of Al 2O 3/Al nanocomposite powder by cold spray. J. Thermal Spray Technol. 20(1–2), 275–284 (2011)

    Article  Google Scholar 

  75. P. Sudharshan Phani, V. Vishnukanthan, G. Sundararajan, Effect of heat treatment on properties of cold sprayed nanocrystalline copper alumina coatings. Acta Materialia 55(14), 4741–4751 (2007)

    Google Scholar 

  76. J. Villafuerte, W. Zheng, Corrosion protection of magnesium alloys by cold spray. Adv. Mater. Process. 165(9), 53–54 (2007)

    Google Scholar 

  77. K. Spencer, M.-X. Zhang, Heat treatment of cold spray coatings to form intermetallic layers. Mater. Forum 34, 79–84 (2008)

    Google Scholar 

  78. M.S. Lee, H.J. Choi, J.W. Choi, H.J. Kim, Application of cold spray coating technique to an underground disposal copper canister and its corrosion properties. Nuclear Eng. Technol. 43(6), 557–566 (2011)

    Article  Google Scholar 

  79. P.C. King, G. Bae, S.H. Zahiri, M. Jahedi, C. Lee, An experimental and finite element study of cold spray copper impact onto two aluminum substrates. J. Thermal Spray Technol. 19(3), 620–634 (2009)

    Article  Google Scholar 

  80. J. Karthikeyan, A. Kay, Cold spray processing of copper and copper alloys. Adv. Mater. Process. 163(8), 49 (2005)

    Google Scholar 

  81. T. Marrocco, D.G. McCartney, P.H. Shipway, A.J. Sturgeon, Production of titanium deposits by cold-gas dynamic spray: numerical modeling and experimental characterization. J. Thermal Spray Technol. 15(2), 263–272 (2006)

    Article  Google Scholar 

  82. W. Wong, A. Rezaeian, E. Irissou, J.-G. Legoux, S. Yue, Cold spray characteristics of commercially pure Ti and Ti-6Al-4V. Adv. Mater. Res. 89–91, 639–644 (2010)

    Article  Google Scholar 

  83. J. Pattison, S. Celotto, R. Morgan, M. Bray, W. O’Neill, Cold gas dynamic manufacturing: a non-thermal approach to freeform fabrication. Int. J. Mach. Tools Manuf. 47(3–4), 627–634 (2007)

    Article  Google Scholar 

  84. M. Bray, A. Cockburn, W. O’Neill, The laser-assisted cold spray process and deposit characterisation. Surf. Coat. Technol. 203(19), 2851–2857 (2009)

    Article  Google Scholar 

  85. V. Champagne, D. Helfritch, E. Wienhold, J. DeHaven, Deposition of copper micro-circuitry by capillary focusing. J. Micromech. Microeng. 23(6), 065023 (2013)

    Article  Google Scholar 

  86. A. Sova, S. Klinkov, V. Kosarev, N. Ryashin, I. Smurov, Preliminary study on deposition of aluminium and copper powders by cold spray micronozzle using helium. Surf. Coat. Technol. 220, 98–101 (2013)

    Article  Google Scholar 

  87. A. Sova, M. Doubenskaia, S. Grigoriev, A. Okunkova, I. Smurov, Parameters of the gas-powder supersonic jet in cold spraying using a mask. J. Thermal Spray Technol. 22(4), 551–556 (2013)

    Article  Google Scholar 

  88. J. Brockmann, J. Torczynski, R. Dykhuizen, R. Neiser, M. Smith, Aerodynamic beam generator for large particles. US6348687 (2002)

    Google Scholar 

  89. Y.A. Song, S. Park, Experimental investigations into rapid prototy** of composites by novel hybrid deposition process. J. Mater. Process. Technol. 171(1), 35–40 (2006)

    Article  Google Scholar 

  90. X. ** by using hybrid plasma deposition and milling. J. Mater. Process. Technol. 209(1), 124–130 (2009)

    Article  Google Scholar 

  91. J. Hur, K. Lee, Zhu-Hu, J. Kim, Hybrid rapid prototy** system using machining and deposition. CAD. Comput. Aided Des. 34(10), 741–754 (2002)

    Google Scholar 

  92. L.J. Gibson, M. Ashby, Cellular Solids, Structure and Properties (Cambridge University Press, 1997)

    Google Scholar 

  93. U. Wegst, H. Bai, E. Saiz, A. Tomsia, R.O. Ritchie, Bioinspired structural materials. Nat. Mater. 14, 23–36 (2015)

    Article  Google Scholar 

  94. M.F. Ashby, A.G. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, H.N.G. Wadley, Metal Foams : A Design Guide (Butterworth-Heinemann, 2000)

    Google Scholar 

  95. J. Banhart, D. Weaire, On the road again: metal foams find favor. Phys. Today 55(7), 37–42 (2002)

    Article  Google Scholar 

  96. J. Banhart, Manufacturing routes for metallic foams. J. Mater. 52(12), 22–27 (2000)

    Google Scholar 

  97. H.N.G. Wadley, Cellular metals manufacturing. Adv. Eng. Mater. 4(10), 726–733 (2002)

    Article  Google Scholar 

  98. D.J. Sypeck, H.N.G. Wadley, Cellular metal truss core sandwich structures. Adv. Eng. Mater. 4(10), 759–764 (2002)

    Article  Google Scholar 

  99. A.G. Evans, J.W. Hutchinson, N.A. Fleck, M.F. Ashby, H.N.G. Wadley, The topological design of multifunctional cellular metals. Progr. Mater. Sci. 46(3–4), 309–327 (2001)

    Google Scholar 

  100. C.B. Williams, J.K. Cochran, D.W. Rosen, Additive manufacturing of metallic cellular materials via three-dimensional printing. Int. J. Adv. Manuf. Technol. 53(1–4), 231–239 (2011)

    Article  Google Scholar 

  101. H. Lee, K. Ko, Fabrication of porous Al alloy coatings by cold gas dynamic spray process. Surf. Eng. 26(6), 395–398 (2010)

    Article  Google Scholar 

  102. J. Sun, Y. Han, K. Cui, Innovative fabrication of porous titanium coating on titanium by cold spraying and vacuum sintering. Mater. Lett. 62(21–22), 3623–3625 (2008)

    Article  Google Scholar 

  103. B. Arifvianto, J. Zhou, Fabrication of metallic biomedical scaffolds with the space holder method: a review. Materials 7(5), 3588–3622 (2014)

    Article  Google Scholar 

  104. M.V. Oliveira, L.C. Pereira, Porous structure characterization in titanium coatings for surgical implants. Mater. Res. 5(3), 269–273 (2002)

    Article  Google Scholar 

  105. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, A hybrid approach to determine critical and erosion velocities in the cold spray process. Appl. Surf. Sci. 273, 617–624 (2013)

    Article  Google Scholar 

  106. H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye, Bonding mechanism in cold gas spraying. Acta Materialia 51(15), 4379–4394 (2003)

    Article  Google Scholar 

  107. T. Schmidt, F. Gärtner, H. Assadi, H. Kreye, Development of a generalized parameter window for cold spray deposition. Acta Materialia 54(3), 729–742 (2006)

    Article  Google Scholar 

  108. S.M. Hassani-Gangaraj, A. Moridi, M. Guagliano, A critical review of corrosion protection by cold spray coatings. Surf. Eng. 31(11), 803–815 (2015)

    Article  Google Scholar 

  109. A. Moridi, S.M. Hassani-Gangaraj, S. Vezzù, M. Guagliano, Number of passes and thickness effect on mechanical characteristics of cold spray coating. Proc. Eng. 74, 449–459 (2014)

    Article  Google Scholar 

  110. D. Leguillon, R. Piat, Fracture of porous materials—influence of the pore size. Eng. Fract. Mech. 75, 1840–1853 (2008)

    Article  Google Scholar 

  111. M. Shalabi, A. Gortemaker, M.V. Hof, J. Jansen, N. Creugers, Implant surface roughness and bone healing: a systematic review (2006)

    Google Scholar 

  112. J.P. Matinlinna, J.K.-H. Tsoi, J. de Vries, H.J. Busscher, Characterization of novel silane coatings on titanium implant surfaces. Clin. Oral Implants Res. 24, 688–697 (2013)

    Article  Google Scholar 

  113. E.O. Olakanmi, M. Doyoyo, Laser-assisted cold-sprayed corrosion- and wear-resistant coatings: a review. J, Thermal Spray Technol. 23(5), 765–785 (2014)

    Article  Google Scholar 

  114. K. Spencer, D.M. Fabijanic, M.-X. Zhang, The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys. Surf. Coat. Technol. 204, 336–344 (2009)

    Article  Google Scholar 

  115. N. Bala, H. Singh, J. Karthikeyan, S. Prakash, Cold spray coating process for corrosion protection: a review. Surf. Eng. 30(6), 414–421 (2014)

    Article  Google Scholar 

  116. H. Koivuluoto, P. Vuoristo, Structure and corrosion properties of cold sprayed coatings: a review. Surf. Eng. 30(6), 404–413 (2014)

    Article  Google Scholar 

  117. V.K. Champagne, The Cold Spray Materials Deposition Process: Fundamentals and Applications (Woodhead Publishing Limited, Series in Metals and Surface Engineering Series, 2007)

    Google Scholar 

  118. X. Meng, J. Zhang, J. Zhao, Y. Liang, Y. Zhang, Influence of gas temperature on microstructure and properties of cold spray 304SS coating. J. Mater. Sci. Technol. 27(9), 809–815 (2011)

    Article  Google Scholar 

  119. X. Wang, J. Zhao, J. He, J. Wang, Microstructural features and mechanical properties induced by the spray forming and cold rolling of the Cu-13.5 wt % Sn alloy. J. Mater. Sci. Technol. 24(5), 803–808 (2008)

    Google Scholar 

  120. T. Hussain, D.G. McCartney, P.H. Shipway, T. Marrocco, Corrosion behavior of cold sprayed titanium coatings and free standing deposits. J. Thermal Spray Technol. 20(1–2), 260–274 (2010)

    Google Scholar 

  121. H. Koivuluoto, A. Coleman, K. Murray, M. Kearns, P. Vuoristo, High pressure cold sprayed (HPCS) and low pressure cold sprayed (LPCS) coatings prepared from OFHC Cu feedstock: overview from powder characteristics to coating properties. J. Thermal Spray Technol. 21(5), 1065–1075 (2012)

    Article  Google Scholar 

  122. H. Koivuluoto, J. Näkki, P. Vuoristo, Corrosion properties of cold-sprayed tantalum coatings. J. Thermal Spray Technol. 18, 75–82 (2009)

    Article  Google Scholar 

  123. K. Balani, T. Laha, A. Agarwal, J. Karthikeyan, N. Munroe, Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating. Surf. Coat. Technol. 195(2–3), 272–279 (2005)

    Article  Google Scholar 

  124. G. Sundararajan, P. Sudharshan, Phani, A. Jyothirmayi, R.C. Gundakaram, The influence of heat treatment on the microstructural, mechanical and corrosion behaviour of cold sprayed SS 316L coatings. J. Mater. Sci. 44(9), 2320–2326 (2009)

    Google Scholar 

  125. T. Marrocco, T. Hussain, D.G. McCartney, P.H. Shipway, Corrosion performance of laser posttreated cold sprayed titanium coatings. J. Thermal Spray Technol. 20(4), 909–917 (2011)

    Article  Google Scholar 

  126. H. Koivuluoto, A. Milanti, G. Bolelli, L. Lusvarghi, P. Vuoristo, High-pressure cold-sprayed Ni and Ni-Cu coatings: improved structures and corrosion properties. J. Thermal Spray Technol. 23(1–2), 98–103 (2013)

    Google Scholar 

  127. Y. Wang, B. Normand, N. Mary, M. Yu, H. Liao, Microstructure and corrosion behavior of cold sprayed SiCp/Al 5056 composite coatings. Surf. Coat. Technol. 251, 264–275 (2014)

    Article  Google Scholar 

  128. Y. Tao, T. **ong, C. Sun, H. **, H. Du, T. Li, Effect of \(\alpha \)-Al2O3 on the properties of cold sprayed Al/\(\alpha \)-Al2O3 composite coatings on AZ91D magnesium alloy. Appl. Surf. Sci. 256(1), 261–266 (2009)

    Article  Google Scholar 

  129. H. Koivuluoto, P. Vuoristo, Effect of ceramic particles on properties of cold-sprayed Ni-20Cr+Al2O3 coatings. J. Thermal Spray Technol. 18(4), 555–562 (2009)

    Article  Google Scholar 

  130. O. Meydanoglu, B. Jodoin, E.S. Kayali, Microstructure, mechanical properties and corrosion performance of 7075 Al matrix ceramic particle reinforced composite coatings produced by the cold gas dynamic spraying process. Surf. Coat. Technol. 235, 108–116 (2013)

    Article  Google Scholar 

  131. D. Dzhurinskiy, E. Maeva, E. Leshchinsky, R. Maev, Corrosion protection of light alloys using low pressure cold spray. J. Thermal Spray Technol. 21, 304–313 (2012)

    Article  Google Scholar 

  132. M. Couto, S. Dosta, M. Torrell, J. Fernández, J. Guilemany, Cold spray deposition of WC17 and 12Co cermets onto aluminum. Surf. Coat. Technol. 235, 54–61 (2013)

    Article  Google Scholar 

  133. S. Dosta, M. Couto, J.M. Guilemany, Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates. Acta Materialia 61(2), 643–652 (2013)

    Article  Google Scholar 

  134. H. Bu, M. Yandouzi, C. Lu, D. MacDonald, B. Jodoin, Cold spray blended Al+Mg 17Al 12 coating for corrosion protection of AZ91D magnesium alloy. Surf. Coat. Technol. 207, 155–162 (2012)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts, USA

    Atieh Moridi

Authors
  1. Atieh Moridi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Atieh Moridi .

Rights and permissions

Reprints and permissions

Copyright information

© 2017 The Author(s)

About this chapter

Cite this chapter

Moridi, A. (2017). Applications. In: Powder Consolidation Using Cold Spray. SpringerBriefs in Applied Sciences and Technology(). Springer, Cham. https://doi.org/10.1007/978-3-319-29962-4_4

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-29962-4_4

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-29961-7

  • Online ISBN: 978-3-319-29962-4

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation