Abstract
An analysis has been carried out of mixed-surface impregnation of the 13Kh3N3M2VFB-Sh age-hardenable integrally alloyed steel consisting of successive vacuum carburizing, heat treatment, grinding and nitriding in the glow-discharge was made. Test results of samples hardened by mixed-surface impregnation for back-to-back endurance and wear resistance have been presented. It has been shown that mixed-surface impregnation combines the advantages of vacuum carburizing and nitriding. A surface hardness of more than 1000 HV has been achieved via the mixed-surface impregnation of this stated steel.
Similar content being viewed by others
References
Ryzhov, N.M., Technological support of fatigue contact resistance of carburized teeth wheels made of heat proof steels, Metalloved. Term. Obrab. Met., 2010, no. 7 (661), pp. 39–45.
Rybakova, L.M. and Kuksenova, L.I., Struktura i iznosostoikost’ metalla (Metal Structure and Wear Resistance), Moscow: Mashinostroenie, 1982.
Lakhtin, Yu.M. and Kogan, Ya.D., Struktura i prochnost’ azotirovannykh splavov (Nitrogenized Alloys Structure and Strength), Moscow: Metallurgiya, 1982.
Karpukhin, S.D., How nitrogenized steels structure influences onto contact fatigue and the way to develop preliminary thermal processing technology and ionic nitrogenizing for teeth wheels made of 16Kh2N3MFBAYu-Sh steel, Extended Abstract of Cand. Sci. (Techn.) Dissertation, Moscow, 1992.
Lashnev, M.M., Smirnov, A.E., and Semenov, M.Yu., The way to apply vacuum nitrogen carburization for increasing grasp resistance of teeth wheels made of VKS-10 steel, Metalloved. Term. Obrab. Met., 2013, no. 1(691), pp. 29–33.
Semenov, M.Yu., Lashnev, M.M., Seval’nev, G.S., and Mokhova, A.S., The way to apply nitrogen carburization for increasing wear resistance of teeth wheels made of fully alloyed steels of martensite class, Probl. Chern. Metallurg. Materialoved., 2016, no. 4, pp. 53–58.
Gorockiewicz, R., Adamek, A., and Korecki, M., Steels for vacuum carburizing and structure of the carburizing layer after low pressure carburizing, Industrial Heating: Int. J. Therm. Techn., 2007, p. http://www.industrialheating. com/ext/resources/IH/Home/Files/PDFs/SteelsforVacuumCarburizing.pdf. Cited 30.12.2016.
Ryzhov, N.M., Smirnov, A.E., Fakhurtdinov, R.S., et al., The way to control carbon satiation of diffuse layer under vacuum carburization of heat-proof steels, Metalloved. Term. Obrab. Met., 2004, no. 8, pp. 22–27.
Semenov, M.Yu., The way to control structure of carburization layers of heat-proof steels. Part 1, Metalloved. Term. Obrab. Met., 2013, no. 5(695), pp. 31–38.
Semenov, M.Yu., The way to control structure of carburization layers of heat-proof steels. Part 2, Metalloved. Term. Obrab. Met., 2013, no. 6(696), pp. 32–37.
Gerasimov, S.A., Kuksenova, L.I., Lapteva, V.G., et al., Improvement of mechanical properties of heat-resistant steels by activation of the nitriding process, J. Mach. Manuf. Reliab., 2014, vol. 43, no. 2, p.165.
Gerasimov, S.A., Kuksenova, L.I., Lapteva, V.G., et al., Mechanical properties of hot-working steels after activization of cementation process, J. Mach. Manuf. Reliab., 2014, vol. 43, no. 4, p. 322.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.E. Smirnov, A.S. Mokhova, M.Yu. Semenov, L.I. Kuksenova, R.S. Fakhurtdinov, 2017, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2017, No. 4, pp. 95–100.
About this article
Cite this article
Smirnov, A.E., Mokhova, A.S., Semenov, M.Y. et al. Mixed-surface impregnation of gear wheels made of 13Kh3N3M2VFB-Sh age-hardenable integrally alloyed steel aimed at improving surface hardness, wear-resistance, and back-to-back endurance. J. Mach. Manuf. Reliab. 46, 404–408 (2017). https://doi.org/10.3103/S1052618817040173
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618817040173