Abstract
Recently, geographic information system Software’s are widely used in engineering geology applications. Such a study was performed in the Eskisehir urban area of about 30 km2 via geo-engineering maps, cross-sections and panel-block diagrams, which are formed to predict the properties of foundation soil. In order to determine the engineering geology properties of the region, physical and mechanical characteristics of the soil profile were tested on 1,011 disturbed and 383 undisturbed samples from a total of 170 boreholes. Topographic, lithological and geotechnical data of the region were compiled as a database in computer. Five geological cross-sections were drawn to decipher specifically the alluvial deposits in detail in densely populated areas. Hence, geological characteristics of the area were evaluated in a three-dimensional mode. Five standard penetration test (SPT) cross-sections at the same directions and SPT, uniaxial compressive strength (qu) and soil class Zonation maps were produced at different depths and panel-block diagrams were also created to define the geo-engineering properties of the investigation area. In this respect, the sub-surface of the study area is fully visualized and useful predictor maps, cross-sections and panel-block diagrams are performed to be used in further studies.
Similar content being viewed by others
References
Altunel E, Barka A (1998) Neotectonic activity of Eskisehir fault zone between Inönü and Sultandere (in Turkish with English abstract). Türkiye Jeoloji Bülteni 41(2):41–52
ASTM (1998) Annual book of ASTM standards, vol 04.08, construction: soil and rock (I). ASTM Publication, Philadelphia
Chacon J, Irigaray C, Fernandez T, El Hamdouni R (2006) Engineering geology maps: landslides and geographical information systems. Bull Eng Geol Environ 65(4):341–411
Dai FC, Lee CF, Zhang XH (2001) GIS-based geo-environmental evaluation for urban land-use planning: a case study. Eng Geol 61:257–271
Gözler MZ, Cevher F, Ergül E, Asutay HJ (1996) The geology of middle and south Sakarya (in Turkish). MTA Report No 9973, Ankara
Kolat C, Doyuran V, Ayday C, Suzen ML (2006) Preparation of a geotechnical microzonation model using geographical information systems based on multicriteria decision analysis. Eng Geol 87(34):241–255
Lu GY, Wong DW (2008) An adaptive inverse-distance weighting spatial interpolation technique. Comput Geosci 34:1044–1055
Orhan A (2005) The geo-enginering properties of foundation soils in southern part of Eskisehir city center and applying of geographic information system (in Turkish with English abstract). Ph.D. Thesis, Graduate School of Natural and Applied Sciences, Eskisehir Osmangazi University, Eskisehir
Orhan A, Seyrek E, Tosun H (2007) A probabilistic approach for earthquake hazard assessment of the Province of Eskisehir, Turkey. Nat Hazards Earth Syst Sci 7:607–614
Smith I (ed) (2006) Smith’s elements of soil mechanics, 8th edn. Blackwell Publishing, Oxford, p 538
Tosun H, Zorluer I, Orhan A, Seyrek E, Savaş H, Türköz M (2007) Seismic hazard and total risk analyses for large dams in Euphrates basin, Turkey. Eng Geol 89:155–170
Acknowledgments
This study was supported by ESOGU Research Foundation Grant No: 200315048 and 199915015.
Author information
Authors and Affiliations
Corresponding author
Additional information
An erratum to this article can be found at http://dx.doi.org/10.1007/s12665-010-0668-2
Rights and permissions
About this article
Cite this article
Orhan, A., Tosun, H. Visualization of geotechnical data by means of geographic information system: a case study in Eskisehir city (NW Turkey). Environ Earth Sci 61, 455–465 (2010). https://doi.org/10.1007/s12665-009-0357-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12665-009-0357-1