Abstract
3D geographic information system software’s (GIS) are widely used in engineering geology applications. This study was performed in the Karsiyaka settlement area for the preparation of engineering geological maps and evaluation of geological structures. Firstly, topographic maps digitized with Arcview GIS 3.2. Engineering geological maps were prepared using site works and digitized with the Rockworks 2006 programme and later stored in GIS-based computer systems. 3D modelling analysis and assessment using a geotechnical database is important to assist decision-making for land use and metro subway line planning, construction site selection, selection of water sources, etc. In this respect, the sub-surface of the study area is fully 3D visualized and useful soil class zonation maps for different depths maps are performed to be used in further studies. At last, after research at this site, the construction applications of Karsiyaka have multiplied.
Similar content being viewed by others
References
Abdul Rahman, A., & Pilouk, M. (2008). Spatial data modelling for 3D GIS. New York:Springer Berlin-Heidelberg 289 pp.
Breunig, M., & Zlatanova, S. (2006). 3D Geo-DBMS. In S. Zlatanova, & D. Prosperi (Eds.), Large-scale 3D data integration-challenges and opportunities (eds ed., pp. 87–115). London: Taylor and Francis.
Che, D.F., Wu, L.X., & Yin, Z.R. (2008). 3D Urban Geological modelling and its application in China: technologies and developments. Geoscience and Remote Sensing Symposium, IEEE International-IGARSS 2008, Boston.
Coors, V., 2003. 3D-GIS in networking environments. Computer Environments and Urban Systems, Vol. 27/4, Special Issue 3D Cadastre, 345–357.
Culshaw, M. G. (2005). From Concept Towards Reality: Develo** the Attributed 3D Model of the Shallow Subsurface. Quarterly Journal of Engineering Geology & Hydrogeology, 38, 231–284.
Dai, F. C., Lee, C. F., & Zhang, X. H. (2001). GIS-Based geo-Environmental Evaluation for Urban Land-use Planning: A Case Study. Engineering Geology, 61, 257–271.
Eskisar, T., Ozyalin, S., Kuruoglu, M., & Yilmaz, H. R. (2013). Microtremor Measurements in the Northern Coast of Izmir Bay, Turkey to Evaluate Site-Specific Characteristics and Fundamental Periods by H/V Spectral Ratio Method. Journal of Earth System Science, 122, 123–136.
Esri Inc. (1997a). ArcView 3D Analyst, 3D Surface creation, visualiton and analyses. California:Environmental Systems Research Institute 118 p.
Esri Inc. (1997b). Understanding GIS. Fourth Edition, Environmental Systems Research Institute, California:The ARC/INFO method.
Koca, M.Y. (1995). Slope stability assessment of the abandoned and site quarries in and around the Izmir city centre. Dokuz Eylul University Graduate School of Natural and Applied Science, PhD. Thesis, 430 (unpublished).
Koshak, N., Flemming, U. (2002). Object oriented data modelling and warehousing to support urban design. 6th International Conference and Decision Support Systems in Architecture and Planning, July 7–10, 2002. Ellecom, The Netherlands.
Meenar, M., & Ambrus, A. (2006). Three-Dimensional Models, Encourage Public Participation. ArcUser, 9(2), 34–37.
Molenaar, M. (1990). A formal data structure for 3D vector maps. Proceedings of EGIS’90 Vol.2, Amsterdam, The Netherlands, 770–781.
Qu, H. G. (2009). Design and development of 3D urban geological data management and service system. In Postdoctoral research paper. Bei**g: Peking University.
Royse, K.R., Rutter, H.K., & Entwisle, D,C. (2009). Property Attribution of 3D Geological Models in the Thames Gateway, London: New Ways of Visualising Geoscientific Information. Bulletin of Engineering Geology and the Environment 68, 1–16.
Tarcan, G., & Koca, M. Y. (2001). Hydrogeological and Geotechnical Assessments of the Kadifekale Landslide Area, Izmir, Turkey;. Environmental Geology, 40(3), 289–299.
Turner, A. K. (2006). Challenges and Trends for Geological Modelling and Visualisation. Bulletin of Engineering Geology and the Environment, 65, 109–127.
Yeniceli, S. (2010). Preparation of 3D modelling using by geotechnical database in Karsiyaka (Izmir) settlement area. Suleyman Demirel University, Graduate School of Natural and Applied Sciences, MSc Thesis, 70 (in Turkish, unpublished).
Wang, Y. (2006). 3D GIS Spatial Modelling for City Surface and Subsurface Integration. Published by IEEE,, 1511–1518.
Acknowledgments
This paper is based largely on the MSc. thesis of the first author, which was supervised by the second author. The authors wish to express their deep gratitude to the managers of the Izmir Metropolitan Municipality, Temelson Geotechnical Services Co., General Directorate of State Hydraulic Works for providing the necessary data.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Yeniceli, S., Ozcelik, M. Practical Application of 3D Visualization Using Geotechnical Database: A Case Study Karsiyaka (Izmir) Settlement Area (Turkey). J Indian Soc Remote Sens 44, 129–134 (2016). https://doi.org/10.1007/s12524-015-0474-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12524-015-0474-0