Introduction

Plastic is indispensable in almost each and every sector and therefore cannot be underestimated, since it is used in electronics, health care, textile, construction, transportation, etc. The utility of plastic is diverse because of its versatile quality, durability, low cost, high strength, less resistance to corrosion and other good mechanical properties (Silva et al. 2020a). Especially, the health care sector has been greatly changed by the advances made with plastics. With the improvements, particularly surgical gloves, syringes, insulin pens, inflatable splits, and masks for one-time use, the medical industry has become more cost-effective, simpler, and safer (Anderson et al. 2021).

As we all know, since Dec. 2019, the population of the world was tremendously affected by a pandemic that originated from a novel coronavirus (SARS-CoV-2) causing a serious respiratory disease known as COVID-19 (WHO 2020b). Transmission of this syndrome is allied with high contagiousness, i.e. direct personal contact or indirect contact with contaminated surfaces, waste, oral transmission, airborne/through the respiratory droplet, etc. (Dietz et al. 2020). Several precautionary steps have been adopted by governments around the world to flatten the disease curve, for instances, partial or total lockdown, limits on social interactions, less movement of passengers, reduction in economic activities, etc. (Tobas 2020). The use of personal protective equipment (PPE) has increased dramatically during this widespread COVID-19 infection. Individuals are under pressure to protect themselves by wearing gloves, masks, and using sanitiser since this disease is unavoidable and highly infectious (Kleme et al. 2020a). Moreover, frontline healthcare workers, medical professionals, and other medical staff use a lot of plastic protective items (Manigandan et al. 2020). Public preference for disposable packaging has moved in the direction of plastics over all other alternatives (Scaraboto et al. 2019). Furthermore, national curfews and home-quarantine orders have caused a greater reliance on online food and other essential grocery delivery, possibly contributing to an increase in plastic packaging waste (Singh 2020; Staub 2020). As the world begins to recover from this pandemic, we may recognise that our raised reliance on plastics at the detriment of our environment has resulted in a new plastic waste epidemic with which we have been grappling. This massive use of petroleum-based plastics continues to accumulate in our environment. We know that the nature of this plastic is non-biodegradable; it creates a lot of problems for our environment. So there is an urgent need to look for some alternatives to deal with these petroleum-based plastics.

This paper illustrates, how urgency and chaos created by COVID-19 have led to the tremendous use of petroleum-based plastics. Various segments of health industry which are responsible for generating plastic waste (particularly during a pandemic) are discussed, like mask usage, PPE kits, diagnostic test, and vaccination. This also reviews the other sectors primarily contributing to pilling up the plastic waste such as packaging, behavioural changes among people, and consumption habits due to fear of transmission. It also identifies the sustainable approaches to deal with this waste like circular economy, use of bioplastics with particular focus on PHA along with its diverse applications and challenges. The article, in the end, sheds light on the possible mitigation and solutions to overcome the shortcomings.

An overview of SARS-COVID-19

COVID-19 is regarded as the most serious health pandemic of the twenty-first century, which has challenged the entire humankind. It is a zoonotic disease disseminated worldwide by a beta group of coronaviruses named severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) (Mackenzie and Smith 2020). People are more susceptible to viral infection due to exceptionally high rate of transmission. Fever, cough, fatigue, muscle discomfort, dyspnoea, pneumonia, and low leukocyte counts are all common signs of COVID-19. Sore throat, diarrhoea, conjunctivitis, headache, skin rashes, or discoloration of fingers or toes are some of the less common symptoms (Li et al. 2020). COVID-19 is more likely to affect elder people and those with pre-existing medical conditions like diabetes, heart problems, and severe asthma. Patients of COVID-19 having chronic type-2 asthma face a significant risk, as the condition and associated morbidities may worsen (Ghosh et al. 2021). Literature suggested that the impact of COVID-19 has not been only restricted to the respiratory system but it also affects the CNS through neuronal transport (Nagu et al. 2021). Studies reveal that approximately 36.4% of COVID-19 patients develop neurological disorders (Wu et al. 2020). The first incidence of viral encephalitis was reported on March 4, 2020, in Bei**g Ditan Hospital, demonstrating the ability of SARS-CoV-2 to enter the central nervous system (** countries, which already have limited resources for waste management, resulting in negative short- and long-term environmental and financial consequences (Phadke et al. 2021). Governments all around the world are scrambling to vaccinate as many people as possible to keep the pandemic under control (Fast Company 2021). First, there was the personal protective equipment (PPE) kits, included masks, gowns, gloves, and other items used by healthcare and frontline workers, as well as diagnostic kits for testing. But now, there are thousands upon thousands of syringes supplied for immunisation campaigns. The use of syringes is rapidly increasing (The Print 2021). According to one estimate from Onsite Waste Technologies, an American company that specialises in medical waste management, the needles from the number of vaccine doses needed to inoculate the entire US population are roughly 66 crore that would be enough to wrap around the Earth 1.8 times. To put things in perspective, India’s population (including minors who are currently not eligible for vaccination) exceeds that of the United States by about 100 million people. According to another estimate by the Association of Indian Medical Device Industry (AIMED), the world would require 800 billion to 1,000 billion syringes to vaccinate 60% of the population, which is the approximate threshold for herd immunity. They predicted that inoculating 60% of India’s approximately 135 million people will require at least 150 million syringes. The COVAX Facility aims to deliver at least 1.8 billion doses of COVID-19 vaccine to 92 low- and middle-income countries by the end of year 2021. All those single-use syringes and needles, if laid end-to-end, could round the globe numerous times (The Print 2021).

Other factors — including people behavioural change thus lead to packaging waste

Plastic stagnation has been worsened not just by the medical industry, but also by food packaging (Hahladakis et al. 2018). After the government imposed a complete lockdown to slow the spread of COVID-19, everyone’s everyday schedule was disrupted and changed drastically as a result of being at home for 24 h. This increased the number of online purchases, which would not have been possible without packaging. In this pandemic, an immense amount of plastic has surged in the form of box covers (Anderson et al. 2021). Figure 2 shows the plastic waste produced due to different activities during a pandemic. COVID-19 has heightened public anxiety about the disease’s ease of transmission. For the sake of protection, people have become more conscientious about their hygiene as well as the hygiene of their food and groceries. This pandemic has totally changed people’s minds about their health and their families, resulting in food and other essential items being delivered in a tidy and safe manner. People have switched to online purchases and single-use plastics as their understanding of reusable plastic items, such as tea cups, food plates, food containers, and packaging covers, has changed due to their infectious conditions. Furthermore, social distancing has driven people to buy processed goods and food from their homes. Online shop** and takeout have resulted in a large number of items being delivered to every home (Anderson et al. 2021). Thailand produces approximately 6,300 tonnes of household waste per day as a result of social distancing and isolation policies, including a 15% increase in plastic waste, almost seven times more than before the pandemic (Wipatayotin, 2020). For example, according to a survey conducted by The Los Angeles Times in Singapore, the island city, 5.7 state’s million residents discarded 1,470 tonnes of extra plastic waste from food delivery and takeout packaging alone. According to report, due to COVID-19, online purchases for food and daily necessities increased by 92.5% and 44.5% in South Korea, respectively, and online shop** rates increased by 12–57% in India, China, and Italy (Anderson et al. 2021). What began as a health issue quickly morphed into an economic, social, and, most importantly, environmental threat. Therefore, corrective steps should be taken until it is too late to mitigate this unwanted and unavoidable global issue.

Fig. 2
figure 2

Plastic waste from diverse activities during pandemic

Full size image

Adverse effects of plastics on human health and the environment

Since most protective equipment is made of plastic, plastic plays an important role in the battle against the COVID-19 pandemic. However, certain properties of plastic, like non-biodegradability, lower melting point, and limited service life, are disadvantages that may have negative health, environmental, and animal health consequences. Plastics are mainly composed of crude oil and natural gas through the process of addition and condensation polymerisation (Pan et al. 2020), for example, reaction of organic diacids with alcohols to form polyesters like polyethylene terephthalate (PET). PET is formed by the condensation polymerisation of terephthalic acid with ethylene glycol with the elimination of water molecules. This mechanism is known as step growth polymerisation, while polymers such as polypropylene and polyethylene are formed by the simple linking of monomeric units: propylene and ethylene respectively without the generation of any other products. This is known as chain growth polymerisation (Saxon et al. 2020). Plastics used in area of packaging intended for human convenience are hazardous as they contain additives (the toxic compounds used to improve properties of plastic, e.g. colorants, fillers, and plasticisers). This poses a threat to the health of humans and as well as animals (Khoo et al. 2021). Recent plastics research has focused on human health and environmental issues, such as the prevalence of endocrine-disrupting compounds in plastics and the long-term contamination of the atmosphere by plastic waste (North and Halden 2013). The majority of plastic waste is non-biodegradable, with a lifespan ranging from less than a year to more than 50 years (Potrykus et al. 2021). Furthermore, when plastic waste litter is exposed to UV radiation, photo- and thermo-oxidative degradation occurs, resulting in secondary microplastics or microbeads with a size of 10–500 m (Andrady 2011). These have negative consequences for marine species like fish, prawns, and crabs, which can accumulate ingested microplastic. Microplastics contain a variety of hazardous chemicals, including organic pollutants such as pesticides, flame retardants, and PCBs additives, which bioaccumulate or be ingested by humans (Li et al. 2016a, b).

Different disposal approaches used for plastic waste

Landfilling, incineration, recycling, and biodegradation are four options for plastic disposal. According to the Ellen McArthur Foundation, 16% of global plastic waste is manually recycled, 25% is incinerated, and 40% is disposed of in sanitary or non-sanitary landfills. The remaining 19% of plastic is discarded in the atmosphere, clogging water, and drainage systems. Every type of plastic is discarded in landfills and incinerators, but the most important thing is that it takes up the least amount of space possible, and the energy and chemicals present in the plastic items are lost as a result of the disposal method (Prata et al. 2020). Any type of plastic, regardless of its type or impurity level, can be burned using the incineration process (WHO 2020c). Overall, this is the most appropriate method for disposing of COVID infectious and infected plastic waste. Even the World Health Organization has recommended incineration for infectious plastic waste. However, during the incineration, toxic gases are released, which can have negative health and environmental consequences. Hazardous gases, like dioxins and furans, are also emitted by the inefficient and poorly managed incineration system. Recycling is the third process. The majority of plastics can be recycled into new products. Mechanical recycling has several limitations, including polymer cross-contamination, inorganic impurities, and the use of additives. Furthermore, in contrast to the recycling process, collecting and sorting plastic waste is the most difficult aspect, whereas chemical recycling is a critical opportunity to reduce terrestrial as well as marine pollution. This also enables the implementation of the circular economy. Pyrolysis and gasification are the two main chemical processes because of their durability and economics (Dogu et al. 2021). Single-stream plastics, such as PET (polyethylene terephthalate), can be recycled with fewer impurities, but multi-layered plastics and single-use plastics, like film and foam, are more difficult to recycle due to their poor integral structure, high pre-processing costs, and technical limitations. Poly (methyl methacrylate) (PMMA), also known as acrylic or plexiglass. Recycling of PMMA can be done by thermal or non-catalytic method, which results in degradation and yield mixture of different monomeric units (Moens et al. 2020). Thermal degradation normally changes the molecular weight of the polymer. PMMA waste contains various additives and backbone which is commonly made up of copolymer instead of homopolymer (which is present in pure PMMA). There are different methods of degradation. For instance, the unrestricted depolymerisation of the MMA copolymer is one of the options. This means that the non-MMA monomer unit has no effect on the degradation mechanism, and therefore, chains unwind without difficulty. This type of behaviour can be seen when the comonomer, which is likewise a methacrylate lacking an ester group, decomposes during the thermal degradation process (Moens et al. 2020). Another major issue is a shortage of manpower. People are afraid to gather waste and be in the process of COVID-19 plastic waste disposal due to the risk of infection transmission during COVID. Because of this practical challenge, this method of plastic disposal is ineffective and underutilised. The best approach is to manufacture biodegradable plastic products, but since they take a long time to degrade, the plastic accumulation increases. The similarity in appearance of biodegradable and non-biodegradable goods can often cause the process of sorting out the plastic items to be delayed. Due to logistical challenges in recycling practises and the general public’s carelessness, there is an abundance of landfill and plastic floating in the oceans. According to a survey conducted by a Hong Kong-based NGO, 300 million tonnes of plastic are manufactured worldwide each year. Eight million tonnes of plastic waste were poured into the oceans as a result of this. This ratio assumes that one truckload of plastic waste is dumped into the sea every minute. This deafening endangers underwater biodiversity and devastates the marine environment. Furthermore, dumped plastics are toxic, and when eaten by sea animals, they damage them as well as humans who eat poisonous fish and other sea creatures. By 2025, the volume of plastic in the ocean would be greater than the weight of the fish in it if the current rate of dum** continues. Aside from that, the volume of garbage in landfills has risen as a result of the pandemic. Coronavirus plastic is expected to clog landfills and float in the seas in 75% of cases. Since the environment and human life are in danger, the government must expend a significant amount of money, resulting in an unsustainable reduction in the budget allocated to other essential public health programmes (Rhodes 2018). According to the UN environmental programme, after COVID-19, the cost of environmental corrective measures will hit 40 USD billion per year, which is lower than the previous year (European Commission 2018). Plastic pollution has a detrimental effect on fisheries, marine transportation, and tourism. Because of the current unfavourable pandemic situation, careful and proper management of plastic waste is required.

Bioplastics

The growing threat of plastic waste as a result of the pandemic is an undeniable fact that necessitates mitigation strategies. The word ‘bioplastic’ refers to a variety of materials:

  1. 1.

    Plastics that are biobased but not biodegradable;

  2. 2.

    Plastics that are biodegradable but not biobased;

  3. 3.

    and the plastics that are both biodegradable and biobased (Philp et al. 2013; Sinan 2020).

All these categories are depicted in Fig. 3.

Fig. 3
figure 3

Different categories of bioplastics

Full size image

The word ‘biodegradable plastic’ refers to a plastic that is both bioderived and biodegradable in this article, while ‘bioplastic’ refers to any plastic made from biomass. The ASTM D6400 (United States), EN13432 (Europe), and ISO17088 (International) standards control biodegradability. True biodegradable plastics, according to these guidelines, degrade due to the natural activity of microbes like bacteria, fungi, and algae. CO2, methane, water, and biomass should be the end products, with no ecotoxic effects or residual by-products. A comparison of petroleum-based plastics and bioplastics is given in Table 2 (Naser et al. 2021). Bioplastics have several advantages over petroleum-based plastics due to biodegradability; however, the production cost is high (Leal Filho et al. 2021).

Table 2 Comparison of petroleum-based plastics and bioplastics
Full size table

The development of biodegradable plastics (BPs) made from renewable feedstock is currently a hot topic. Renewable biomass or raw materials like cellulose, lignin, starch, and bioethanol are commonly used to make BPs. Polylactic acid (PLA), polyhydroxyalkanoate (PHA), polyhydroxybutyrate (PHB), and polyhydroxybutyrate valerate (PHBV) are the most popular biodegradable and commercially available biopolymers in the market today. Biodegradation of BPs is possible without any negative consequences (Haider et al. 2019).

Bioplastics and India

In India, the bioplastics industry is still in its infancy. In India, only a few companies are involved in the bioplastics industry. Environmental awareness projects, quick access to feedstock, and government funding are all hel** bioplastics manufacturers thrive in India. More initiative is required in the areas of manufacturing, raw materials, and technology growth. An initial move in introducing this transition is to raise environmental awareness and promote the long-term benefits of bio-plastics. The National Green Tribunal’s (state-level committee) has given the government until August 31, 2019, to enact the plastic ban. Scientists are working on the development of bioplastics all over India. Recently IIT Guwahati came up with an improvement in commercial production of bioplastics (Kalita 2019). India’s first biotechnology company for biodegradable products is Biogreen. Bioplastics are already being produced in India by Truegreen, Plastobags, Ecolife, and Envigreen (Biogreen 2017). Many technological breakthroughs have enhanced the Indian Bioplastics market, which has seen significant growth. It is up to each person to and their use of traditional plastics as much as possible in their everyday lives (India Bioplastics Market 2019).

Substitution potential of bioplastics

While current substitution levels are low, biodegradable polymers have the potential to replace the majority of different petroleum-based polymers currently in use, as shown in Table 3 (Shen et al. 2009). Extensive research has been done to study the technological replacement potential of biobased plastics to replace their petrochemical equivalents. As of 2007, reported that biobased plastics could replace conventional plastics at the rate of 94%, with 31% of that coming from biodegradable plastics and 63% coming from biobased but not biodegradable plastics. The substitutional potential of bioplastics over conventional plastics concerning cost is well documented. Figure 4 shows the average price of different polymers (Shen et al. 2009). Due to economic considerations, difficulty in a quick scaleup, difficulty in assuring availability of renewable (biobased) feedstocks, and the plastics industry’s sluggish acceptance of new plastics, it is unlikely that this potential will be realised in the short-to-medium term. (Shen et al. 2009). Due to the slow rate of substitution, any environmental trade-offs, such as a reduction in non-renewable energy usage, will take more than two decades to realise at a macro-scale. They do, however, point out that an advantage of this incremental change may be the prevention of technical lock-in and the opportunity to ensure that the most environmentally friendly, cost-effective processes are implemented (Dilkes-Hoffman et al. 2019).

Table 3 Substitution potential of bioplastics with different types of conventional plastics
Full size table
Fig. 4
figure 4

Average prices of different polymers in year 2009

Full size image

Starch, polylactic acid (PLA), and polyhydroxyalkanoate (PHA), these three biopolymers however are tempting for substituting petroleum-based plastics. Table 3 shows clearly the substitution potential. While some can replace partially, some can fully (Shen et al. 2009). For instance, starch is considered one of the best renewable biopolymers, because of its biodegradable nature, huge abundance, and lower production cost (Peelman et al. 2013). Currently, starch has many applications in diverse sectors like medicine, food, agriculture, and packaging (Shafqat et al. 2020; Liew and Khor 2015). Similarly, PLA is also regarded as major bio polyester, particularly known for medical and packaging applications (Vert et al. 1995). Several companies are producing different types of PLA products (Sinclair 1996; Lunt 1998). Its tunability and huge abundance make it a potent alternative to petroleum-based plastics for packaging applications like bottles, treys, and cups (Auras et al. 2004). A study reported that the cost of PLA is the lowest of all biopolymers (Sin et al. 2013). The third is polyhydroxyalkanoate (PHA), synthesised by microbes intracellularly as reserved food material. PHA too can replace a variety of conventional plastics. It has applications in medical, packaging, agriculture, etc. (Li et al. 2016a, b).

According to the study of the European bioplastics nova institute, the packaging sector holds a major proportion of bioplastics production over all other different sectors including electronics, agriculture, textiles, and construction as represented in Fig. 5.

Fig. 5
figure 5

Global production capacities of bioplastics in 2020 (by market segment) (European bioplastics, nova institute 2020)

Full size image

Challenges for bioplastics

The key feedstocks, water footprint, land use, and minimal infrastructure all pose challenges for bioplastics. However, incorporating processing in a biorefinery and using by-products and waste flows as raw materials will greatly reduce the ecological footprint (Tsang et al. 2019; Ummalyma et al. 2020; Ivanov and Christopher 2016; Zhang et al. 2018). Due to their polysaccharides and lignin, recent studies have shown that wood and other lignocellulosic residues from agroforestry will be more sustainable alternatives (Tedeschi et al. 2020). For example, producing PHA from a variety of biomass sources, municipal wastewater, CO2, and CH4 has additional advantages for the long-term growth of bioplastics (Drre and Eikmanns 2015; Ampelli et al. 2015; Crumbley and Gonzalez 2018).

Other than these, several challenges are also there due to the lack of awareness and information among people, as represented in Fig. 6 (Leal Filho et al. 2021).

Fig. 6
figure 6

Various challenges in the way of Bioplastics

Full size image

Circular economy: a perspective for waste management during COVID-19 pandemic

This unforeseen circumstance has prompted countries to adopt an approach of linear economy for waste management, which entails harvesting resources to manufacture new goods, with the majority of these products ending up in landfills or the natural environment (Hahladakis et al. 2020; Payne et al. 2019). Before the COVID-19 era, approximately two billion people in the world lacked facilities for waste collection, and three billion lacked proper disposal systems (Wilson et al. 2015). As a result, it is unsurprising that the linear economy has contributed significantly to the rise in the aforementioned plastic waste crisis. It is critical to shift and take steps toward more possible sustainability models, such as a circular economy, to resolve the stated environmental problems surrounding plastic and medical wastes. A circular economy is an ideal alternative to a conventional linear economy that includes production, usage, and disposal. This approach aims to minimise resource consumption (reduce) and reuse existing products for as long as possible (reuse) or accept waste as new sources (recycle or recover) by using recycling and recovery facilities. Three main components of this scheme are shown in Fig. 7.

Fig. 7
figure 7

Different components of circular economy

Full size image

During the period of lockdown, however, the majority of material recovery facilities were shut down due to concerns from formal, informal, and local authorities about the possibility of coronavirus spreading among waste handlers. As a result, having adequate waste facilities (including collection, transport, and disposal) while taking into account minimal health hazards has created an issue and challenge all over the world. All of the above problems, as well as the enormous scale of COVID-19 waste generation, highlight the need for new strategies and techniques for hazardous waste during such a global pandemic. Even though COVID-waste management is still in its early stages, lessons learned from previous diseases such as AIDS, MERS-CoV, and SARS-CoV-1, as well as the creation of new and effective ways to deal with coronavirus, are being considered. As a result, it is critical to collect disparate data on coronavirus waste management when considering a circular economy with minimal waste (Teymourian et al. 2021).

An account of PHA: promising biodegradable plastics

Polyhydroxyalkanoates (PHA) are naturally derived biopolymers, which are synthesised by various microbes in granular form (Koller, 2017) as shown in Fig. 8 in the presence of carbon-rich and nitrogen-deficient medium (Surendran et al. 2020). Different bacterial strains like gram-negative bacteria, gram-positive bacteria, archaea, and photosynthetic bacteria are capable of producing PHA in both aerobic and anaerobic conditions. Approximately 150 various types of PHA have been discovered till now (Mitra et al. 2016).

Reduction in cost of purification

Cell and broth separation, as well as product recovery, are all part of PHA’s downstream production. Expensive centrifugation, micro-filtration, and other time-consuming processes are needed for the separation (Jiang and Chen 2016). As a result, methods for recovering PHA through an easy, reliable, and less polluting process must be developed.

Future considerations and recommendations

We may find that our dependence on plastic has raised as a lockdown or other restrictions are progressively lifted. Increased use of PPE and SUP would result from the resumption of economic activity and movement of population, resulting in a rise in waste generation. Managing the growing amount of single-use plastic waste will be a huge challenge for all governments, particularly in many develo** countries. Solving the COVID-19 crisis cannot be done at the cost of addressing humanity’s longer-term problem: the climate crisis (Climate Action Tracker 2020). More funds should be allocated by corporations as well as governments worldwide to teach people about the circular economy and why they should go for reuse and recycle (Sharma et al. 2020). According to research, simply presenting information through an awareness drive is unlikely to result in behaviour change. For example, media coverage and public awareness campaigns about the proper disposal of personal protective equipment (PPE) such as masks and gloves in a sealed garbage bag will address concerns about sanitation workers’ safety (Prata et al. 2020). This can have an indirect effect on our actions by increasing our vulnerability to other interventions and reflecting social norms — the unwritten rules of appropriate behaviour (Huang 2016). When we become aware of a problem, we can need some assistance in moving from awareness to action. According to a new report, voice trigger action causes background change and encourages pro-environmental behaviours (Ohtomo and Ohnuma 2014). By changing the norms, we can successfully phase out our reliance on single-use plastic goods. The more we talk about the issue and the solutions, the more companies will search out and propose alternatives, and we will be more likely to mobilise as a community (Innerself 2020).

Conclusions

While human health should take precedence, environmental health should also be considered for the greater good of the entire planet. It is not only the government’s responsibility to ensure environmental safety, but also the individual’s responsibility to be active and behave responsibly by selecting reusable personal protection equipment, minimising the use of disposable products, choosing environmentally friendly materials such as bioplastics, and appropriately disposing of them. If we think of reduce, reuse, and recycle, the world will become safer, the natural resources will automatically be secured, and harmful emissions will be minimised. To summarise, pandemic situations such as COVID-19 can be easily tackled with full effort and collaboration between the government and the public. Then only environmental and individual security can be easily achieved.