Abstract
In this paper, an improved periodic cellular material (PCM), called X-lattice cored corrugated honeycomb (XCCH), which combines X-lattice with corrugated honeycomb is proposed. Compressive strength and convective heat transfer characteristics of this PCM are explored by comparisons with the X-lattice cored plate honeycomb (XCPH). A series of experiments and numerical simulations were carried out. In terms of heat transfer, at the same Reynolds number, the overall Nusselt number of the XCCH is 6–11% higher experimentally and 9–14% higher numerically than that of the XCPH. Besides, although the introduction of corrugated fins increases the friction factor of the XCCH by 40%, the heat transfer performance of the XCCH is still 4.2–4.9% better experimentally and 5.6–7.1% better numerically than that of the XCPH. The corrugated fin makes the vortex pairs in the channel closer to each other and improves the turbulent kinetic energy at the vortices’ boundary, which is the dominant mechanism of the enhanced heat transfer. In terms of mechanical strength, the compressive strength of the XCCH is 20% higher than that of the XCPH. The corrugated fins increase the effective moment of inertia; further, the increased specific surface area improves the material’s ability to absorb energy. These two factors are responsible for the improved mechanical strength of the XCCH.
Similar content being viewed by others
Abbreviations
- b 1, b 2 :
-
Half the width of the intersection in Fig. 2 (mm)
- c p :
-
The air specific heat (J kg−1 K−1)
- f H :
-
Non-dimensional friction factor
- F :
-
Normal force applied to the sandwich panels in the mechanical tests (N)
- h i :
-
The overall coefficient of heat transfer for the ith unit cell (W m−2 K−1)
- H c :
-
The height of the core of X-lattice (mm)
- i :
-
The cell number arranged along the mainstream direction
- k e :
-
Turbulent kinetic energy of the fluid (J kg−1)
- k f, k s :
-
Fluid and solid material thermal conductivities (W m−1 K−1)
- l :
-
The length of a cell (mm)
- L :
-
The total length of the test sample (mm)
- Nu:
-
Non-dimensional local Nusselt number
- Nuave :
-
Average value of local Nusselt number
- Nui :
-
Overall Nusselt number per cell
- q":
-
The heat flux applied to the bottom endwall of sandwich panel (W m−2)
- r 1−r 4 :
-
Fillet radii (mm)
- ReH :
-
Reynolds number
- t f :
-
The honeycomb wall thickness (mm)
- T f,i :
-
The bulk mean fluid temperature (°C)
- T i :
-
The measured endwall temperature of each unit cell (°C)
- T in :
-
Temperature of inlet fluid (°C)
- U m :
-
The average velocity of channel (m s−1)
- V m :
-
Velocity value (m s−1)
- w :
-
The width of a channel (mm)
- w j :
-
The width of X-lattice contact to upper wall (mm)
- w l :
-
An X-lattice ligament’s width (mm)
- W :
-
The total width of the test piece (mm)
- x, y, z :
-
Coordinates (mm)
- y + :
-
The dimensionless wall distance (mm)
- α, β :
-
The angles between X-lattice ligaments (°)
- Δp :
-
Pressure drop (Pa)
- ε :
-
The measured normal strain
- μ :
-
The air dynamic viscosity (Pa s)
- ρ :
-
The air density (kg m−3)
- σ :
-
The measured equivalent normal stress (MPa)
- OA, OB:
-
Orientation A, orientation B
- PCM:
-
Periodic cellular material
- XCCH:
-
X-lattice cored corrugated honeycomb
- XCPH:
-
X-lattice cored plate honeycomb
References
Thenmozhi R, Sharmeela R, Natarajan P, Velraj R. Transient thermal management comparison of a microprocessor using PCMs in various configurations. J Therm Sci. 2011;20:516–20.
Ferrari L, Barbato M, Esser B, Petkov I, Kuhn M, Gianella S, Barcena J, Jimenez C, Francesconi V, Liedtke AO. Sandwich structured ceramic matrix composites with periodic cellular ceramic cores: an active cooled thermal protection for space vehicles. Compos Struct. 2016;154:61–8.
Song JW, Sun B. Coupled numerical simulation of combustion and regenerative cooling in LOX/Methane rocket engines. Appl Therm Eng. 2016;106:762–73.
Ma Y, Yan HB, **e GN. Flow and thermal performance of sandwich panels with plate fins or/and pyramidal lattice. Appl Therm Eng. 2020;164: 114468.
Shen BB, Yan HB, Xue HQ, **e GN. The effects of geometrical topology on fluid flow and thermal performance in Kagome cored sandwich panels. Appl Therm Eng. 2018;142:79–88.
Zhao JF, Sun MR, Zhang LX, Hu CZ, Tang DW, Yang L, Song YC. Forced convection heat transfer in porous structure: effect of morphology on pressure drop and heat transfer coefficient. J Therm Sci. 2021;30:363–93.
Wadley HNG. Multifunctional periodic cellular metals. Philos Trans Soc A. 2006;364(1838):31–68.
Kim T, Hodson HP, Lu TJ. Contribution of vortex structures and flow separation to local and overall pressure and heat transfer characteristics in an ultralightweight lattice material. Int J Heat Mass Transf. 2005;48(19):4243–64.
Kim T, Zhao CY, Lu TJ, Hodson HP. Convective heat dissipation with lattice-frame materials. Mech Mater. 2004;36:767–80.
Kim T, Hodson HP, Lu TJ. Pressure loss and heat transfer mechanisms in a lattice-frame structured heat exchanger. IMechE J Mech Eng Sci. 2004;218(11):1321–36.
Kim T, Hodson HP, Lu TJ. Fluid-flow and endwall heat-transfer characteristics of an ultralight lattice-frame material. Int J Heat Mass Transf. 2004;47(6–7):1129–40.
Joo JH, Kang KJ, Kim T, Lu TJ. Forced convective heat transfer in all metallicwire-woven bulk Kagome sandwich panels. Int J Heat Mass Transf. 2011;54(25–26):5658–62.
Wei K, Cheng XM, He RJ, Pei YM, Fang DN. Heat transfer mechanism of the C/SiC ceramics pyramidal lattice composites. Compos B Eng. 2014;63:8–14.
Wei K, He RJ, Cheng XM, Pei YM, Zhang RB, Fang DN. Fabrication and heat transfer characteristics of C/SiC pyramidal core lattice sandwich panel. Appl Therm Eng. 2015;81:10–7.
Wei K, Wang KY, Cheng XM, Peng Y, Li MJ, Yang XJ. Structural and thermal analysis of integrated thermal protection systems with C/SiC composite cellular core sandwich panels. Appl Therm Eng. 2018;131:209–20.
Gao L, Sun YG. Fluid flow and heat transfer characteristics of composite lattice core sandwich structures. J Thermophys Heat Transf. 2014;28(2):258–69.
Gao L, Sun YG. Thermal control of composite sandwich structure with lattice truss cores. J Thermophys Heat Transf. 2015;29:47–54.
Wang XW, Wei K, Tao Y, Yang XJ, Zhou H, He RJ, Fang DN. Thermal protection system integrating graded insulation materials and multilayer ceramic matrix composite cellular sandwich panels. Compos Struct. 2019;209:523–34.
Yan HB, Zhang QC, Lu TJ, Kim T. A lightweight X-type metallic lattice in single-phase forced convection. Int J Heat Mass Transf. 2015;83:273–83.
Yan HB, Zhang QC, Chen WJ, **e GN, Dang JJ, Lu TJ. An X-lattice cored rectangular honeycomb with enhanced convective heat transfer performance. Appl Therm Eng. 2019;166:114687.
Abouelregal AE, Marin M. The size-dependent thermoelastic vibrations of nanobeams subjected to harmonic excitation and rectified sine wave heating. Mathematics. 2020;8(7):1128.
Zhang LJ, Bhatti MM, Michaelides E, Efstathios M, Marin RE. Hybrid nanofluid flow towards an elastic surface with tantalum and nickel nanoparticles, under the influence of an induced magnetic field. Eur Phys J Spec Top. 2022;231(3):521–33.
Zhang P, Yuan Y, Gao ZH, Li J, Niu Q, Shi XB, Zhou YL, Gu YF. Microtwinning in the nickel-based superalloy CM247LC during compression tests. Philos Mag. 2022;102(22):2235–55.
Iwata N, Suzuki H, Mochizuki S. Numerical simulation of viscosity/implicit large-eddy steady turbulence with the Reynolds number dependency. J Phys Conf Ser. 2021;2047(1):012007.
Alwan Naseer T, Shcheklein S, Ali O. Investigation of the coefficient of heat transfer and daily cumulative production in a single-slope solar distiller at different water depths. Energy Sour Part A Recovery Util Environ Eff. 2021;43(21):2820–37.
Zhang QC, Chen AP, Cheng CQ, Lu TJ. Ultralight X-type lattice sandwich structure (II): micromechanics modelling and finite element analysis. Sci China Ser E-Technol Sci. 2009;52(9):2670–80.
Coleman HW, Steele WG. Experimentation, validation, and uncertainty analysis for engineers. 3rd ed. Hoboken, New Jersey: John Wiley & Sons Inc; 2009.
Yan HB, Yang XH, Lu TJ, **e GN. Convective heat transfer in a lightweight multifunctional sandwich panel with X-type metallic lattice core. Appl Therm Eng. 2017;127:1293–304.
Han B, Qin KK, Yu B, Wang B, Zhang QC, Lu TJ. Honeycomb-corrugation hybrid as a novel sandwich core for significantly enhanced compressive performance. Mater Des. 2016;93:271–82.
Zhang XQ, ** X, **e GN, Yan HB. Thermo-fluidic comparison between sandwich panels with tetrahedral lattice cores fabricated by casting and metal sheet folding. Energies. 2017;10:906.
Kolář V. Vortex identification: new requirements and limitations. Int J Heat Fluid Flow. 2007;28:638–52.
Menter FR. Two-equation eddy-viscosity turbulence models for engineering applications. AIAA J. 1994;32776(8):1598–605.
Nagata K, Sakai Y, Inaba T, Suzuki H, Terashima O, Suzuki H. Turbulence structure and turbulence kinetic energy transport in multiscale/fractal-generated turbulence. Phys Fluids. 2013;25: 065102.
Tian J, Kim T, Lu TJ, Hodson HP, Queheillalt DT, Sypeck DJ, Wadley HNG. The effects of topology upon fluid-flow and heat-transfer within cellular copper structures. Int J Heat Mass Transf. 2004;47(14):3171–86.
Acknowledgements
This work was supported by the Fundamental Research Funds for the Central Universities (No. 30922010914), National the Natural Science Foundation of China (No. 51806176) and the China Postdoctoral Science Foundation (No. 2019M663816).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Chen, J., Yan, L., Yan, H. et al. Thermo-structural performance and flow analysis of X-latticed honeycombs with plate or corrugated walls. J Therm Anal Calorim 148, 3613–3629 (2023). https://doi.org/10.1007/s10973-023-11986-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-023-11986-9