Abstract
Several methods are in use for the determination of the thermal to epithermal neutron fluence rate ratio (f) and the deviation of the epithermal neutron spectrum from the 1/E shape parameter (α). In our former work, it was proven that the recently developed and characterized Synthetic Multi-ELement Standard (SMELS) can be used for the fast verification of the stability of the irradiation parameters using the Au-Zr bare monitor method. However, this latter method using SMELS had a too low precision for an accurate determination of f and α. Therefore, the Cd-ratio for multi-monitor method using SMELS was investigated for two irradiation channels. As shown the material can also be used as a monitor for the calibration of an irradiation facility.
Similar content being viewed by others
References
F. De Corte, K. Sordo-El Hammami, L. Moens, A. Simonits, A. De Wispelaere, J. Hoste, J. Radioanal. Chem., 62 (1981) 209.
A. De Wispelaere, F. De Corte, D. A. W. Bossus, J. J. M. G. Swagten, P. Vermaercke, Nucl. Instr. Meth. Phys. Res., A564 (2006) 636.
P. Vermaercke, P. Robouch, L. Sneyers, F. De Corte, J. Radioanal. Nucl. Chem., 276 (2008) 235.
P. Vermaercke, P. Robouch, M. Eguskiza, F. De Corte, G. Kennedy, B. Smodis, R. Jacimovic, C. Yonezawa, H. Matsue, X. Lin, M. Blaauw, J. Kuĉera, Nucl. Instr. Meth. Phys. Res., A564 (2006) 675.
F. De Corte, A. Simonits, Atomic Data and Nuclear Data Tables, 85 (2003) 47.
A. De Wispelaere, F. De Corte, J. Radioanal. Nucl. Chem., 257 (2003) 519.
M. J. J. Ammerlaan, M. A. Bacchi, P. Bode, E. A. De Nadai Fernandes, Trans. Am. Nucl. Soc., 91 (2004) 872.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Vermaercke, P., Sneyers, L., Bruggeman, M. et al. Neutron spectrum calibration using the Cd-ratio for multi-monitor method with a synthetic multi-element standard. J Radioanal Nucl Chem 278, 631–636 (2008). https://doi.org/10.1007/s10967-008-1206-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10967-008-1206-5