Abstract
Anatase TiO2 photoanodes were modified by hydrothermally synthesized WO3 nanorods for dye-sensitized solar cell (DSSC) applications. Two different configurations were investigated differing in the location of WO3 nanorods: (i) A thin undercoat of WO3 nanorods was produced on the FTO substrate, under a layer of commercial TiO2, (ii) 0.5 wt% of WO3 nanorods were introduced into a commercial TiO2 paste. FE-SEM images confirmed the nanorod shape of the particles and the orthorhombic structure of WO3 was verified by XRD analysis. Photoelectrochemical impedance spectroscopy under UV-C light irradiation revealed an increase in charge transfer resistance with the addition of WO3 nanorods for both configurations. For front illumination, the photovoltaic results showed that despite the screen effect of WO3 nanorods layer which negatively impacted the Voc, cells with WO3 nanorods undercoat showed better performance than cells with WO3 nanorods introduced in the TiO2 matrix, the latter suffered from reduced dye loading and light harvesting ability. Conversely in the case of back illumination, the introduced undercoat of WO3 nanorods had a positive effect on the performance of the cell, with an increase in both Voc and Jsc. The excellent electron mobility and specific nanorod shape of WO3 contributed to charge trap** and injection into the conductive substrate, thereby reducing recombination and dark current. In addition, the scattering nature of the WO3 nanorods undercoat was beneficial for light harvesting in the photoanode in the case of back illumination. Such a result opens the way to potential indoor applications.
Similar content being viewed by others
Data availability
All data generated and analyzed during the current study are included in this published article.
References
J.-M. Ji, H. Zhou, Y.K. Eom, C.H. Kim, H.K. Kim, 14.2% efficiency dye-sensitized solar cells by co-sensitizing Novel Thieno[3,2-b]indole-based organic dyes with a promising porphyrin sensitizer. Adv. Energy Mater. 10, 2000124 (2020). https://doi.org/10.1002/aenm.202000124
R. Biswas, S. Chatterjee, Effect of surface modification via sol-gel spin coating of ZnO nanoparticles on the performance of WO3 photoanode based dye sensitized solar cells. Optik 212, 164142 (2020). https://doi.org/10.1016/j.ijleo.2019.164142
W.-Y. Rho, H. Jeon, H.-S. Kim, W.-J. Chung, J.S. Suh, B.-H. Jun, Recent progress in dye-sensitized solar cells for improving efficiency: TiO2 nanotube arrays in active layer. J. Nanomater. 2015, 2476 (2015). https://doi.org/10.1155/2015/247689
S.-M. Yong, T. Nikolay, B.T. Ahn, D.K. Kim, One-dimensional WO3 nanorods as photoelectrodes for dye-sensitized solar cells. J. Alloys Compd. 547, 113–117 (2013). https://doi.org/10.1016/j.jallcom.2012.08.124
Y. Kong, S. Honggang, W. Fan, L. Wang, Z. Hongkai, X. Zhao, S. Yuan, Enhanced photoelectrochemical performance of tungsten oxide film by bifunctional Au nanoparticles. RSC Adv. 7, 15201–15210 (2017). https://doi.org/10.1039/C7RA01426K
S.S. Kalanur, Y.J. Hwang, S.Y. Chae, O.S. Joo, Facile growth of aligned WO3 nanorods on FTO substrate for enhanced photoanodic water oxidation activity. J. Mater. Chem. A 1, 3479–3488 (2013). https://doi.org/10.1039/C3TA01175E
M.M. Momeni, M. Akbarnia, Y. Ghayeb, Preparation of S-W-codoped TiO2 nanotubes and effect of various hole scavengers on their photoelectrochemical activity: Alcohol series. Int. J. Hydrog. Energy 45, 33552–33562 (2020). https://doi.org/10.1016/j.ijhydene.2020.09.112
S. Chen, Y. **ao, W. **e, Y. Wang, Z. Hu, W. Zhang, H. Zhao, Facile strategy for synthesizing non-stoichiometric monoclinic structured tungsten trioxide (WO3−x) with plasma resonance absorption and enhanced photocatalytic activity. Nanomaterials 8, 553 (2018). https://doi.org/10.3390/nano8070553
H. Kim, S. Karuppanan, K. Yong, Photoelectrochemical and photocatalytic properties of tungsten oxide nanorods grown by thermal evaporation. Mater. Chem. Phys. 120, 452–455 (2010). https://doi.org/10.1016/j.matchemphys.2009.11.042
X. Hou, K. Aitola, P.D. Lund, TiO2 nanotubes for dye-sensitized solar cells-a review. Energy Sci. Eng. 9, 921–937 (2021). https://doi.org/10.1002/ese3.831
N.H. Hieu, L.K. Hung, L.T.T. Nghia, N.D. Viet, N.T. Hoang, M. Thanh Phong, Synthesis of titanium dioxide nanorods combining with titanium dioxide nanoparticles/reduced graphene oxide nanocomposite for fabrication of photoanodes in dye–sensitized solar cells. Mater. Technol. 37, 2541–2551 (2022). https://doi.org/10.1080/10667857.2022.2046927
Q. Bi, Y. Gao, C. Dang, Z. Wang, J. Xue, Study on the photoelectrocatalytic performance of a WO3 thin film electrode by constructing a BiOI/WO3 heterojunction. CrystEngComm 21, 6744–6757 (2019). https://doi.org/10.1039/C9CE01183H
R. Levinas, N. Tsyntsaru, T. Murauskas, H. Cesiulis, Improved photocatalytic water splitting activity of highly porous WO3 photoanodes by electrochemical H+ intercalation. Front. Chem. Eng. (2021). https://doi.org/10.3389/fceng.2021.760700
H.H. Vu, Y.-H. Hwang, H.-K. Kim, The effects of WO3 nanoparticles addition to the TiO2 photoelectrode in dye-sensitized solar cells. Curr. Photovolt. Res. 4, 42–47 (2016). https://doi.org/10.21218/CPR.2016.4.2.042
O. Prakash, V. Saxena, S. Choudhury, A. Tanvi, A.K. Singh, A. Debnath, K.P. Mahajan, D.K.A. Muthe, Low temperature processable ultra-thin WO3 Langmuir-Blodgett film as excellent hole blocking layer for enhanced performance in dye sensitized solar cell. Electrochimica Acta 318, 405–412 (2019). https://doi.org/10.1016/j.electacta.2019.06.047
K. Wang, Y. Shi, Q. Dong, Y. Li, S. Wang, X. Yu, M. Wu, T. Ma, Low Temperature and Solution Processed Amorphous WOX as electron selective layer for perovskite solar cells. J. Phys. Chem. Lett. 6, 755–759 (2015). https://doi.org/10.1021/acs.jpclett.5b00010
N.M. Makwana, R. Quesada-Cabrera, I.P. Parkin, P.F. McMillan, A. Mills, J.A. Darr, A simple and low-cost method for the preparation of self-supported TiO2-WO3 ceramic heterojunction wafers. J. Mater. Chem. A 2, 17602–17608 (2014). https://doi.org/10.1039/C4TA03257H
M. Yan, Q.-H. Wang, Y.-Z. Zhu, M.-L. Han, Y.-Q. Yan, J.-Y. Zheng, Effect of triptycene unit on the performance of porphyrin-based dye-sensitized solar cells. J. Photochem. Photobiol. A 416, 113325 (2021). https://doi.org/10.1016/j.jphotochem.2021.113325
P. Cheng, C. Deng, X. Dai, B. Li, D. Liu, J. Xu, Enhanced energy conversion efficiency of TiO2 electrode modified with WO3 in dye-sensitized solar cells. J. Photochem. Photobiol. A 195, 144–150 (2008). https://doi.org/10.1016/j.jphotochem.2007.09.016
T. Eom, K.H. Kim, C.W. Bark, H. Choi, (2014) Efficiency improvement of dye-sensitized solar cells using WO3. Mol. Cryst. Liq. Cryst. (2014). https://doi.org/10.1080/15421406.944675
M. Ismail, M.M. Chebaane, L. Bousselmi, O. Zahraa, C. Olivier, T. Toupance, Photoelectrochemical properties of WO3-modified anatase TiO2 photoanodes and application for dye-sensitized solar cells. Surf. Interfaces 27, 101543 (2021). https://doi.org/10.1016/j.surfin.2021.101543
T.-S. Kang, S.-H. Moon, K.-J. Kim, Enhanced photocurrent-voltage characteristics of Ru(II)-dye sensitized TiO2 solar cells with TiO2-WO3 buffer layers prepared by a sol-gel method. J. Electrochem. Soc. (2002). https://doi.org/10.1149/1.1467367
P.P. González-Borrero, F. Sato, A.N. Medina, M.L. Baesso, A.C. Bento, G. Baldissera, C. Persson, G.A. Niklasson, C.G. Granqvist, A. da Ferreira Silva, Optical band-gap determination of nanostructured WO3 film. Appl. Phys. Lett. 96, 0619091–0619093 (2010). https://doi.org/10.1063/1.3313945
M.A. Henderson, A surface science perspective on TiO2 photocatalysis. Surf. Sci. Rep. 66, 185–297 (2011). https://doi.org/10.1016/j.surfrep.2011.01.001
J. Coronado, F. Fresno, M. Hernández-Alonso, R. Portela, S. Suárez, S. García Rodríguez, V. de la Peña O’Shea, Design of advanced photocatalytic materials for energy and environmental applications (Springer, London, 2013), pp.1–348. https://doi.org/10.1007/978-1-4471-5061-9_5
S. Higashimoto, M. Sakiyama, M. Azuma, Photoelectrochemical properties of hybrid WO3/TiO2 electrode. Effect of structures of WO3 on charge separation behavior. Thin Solid Films 503, 201–206 (2006). https://doi.org/10.1016/j.tsf.2005.11.110
N.G. Park, J. van de Lagemaat, A.J. Frank, Comparison of dye-sensitized rutile- and anatase-based TiO2 solar cells. J. Phys. Chem. B 104, 8989–8994 (2000). https://doi.org/10.1021/jp994365l
A. Mohamed, Y. Selim, Factors affect dye sensitized solar cells performance. Renew. Energy Sustain. Develop. 3, 83–86 (2017). https://doi.org/10.21622/resd.2017.03.1.083
N.H. Shamsudin, S. Shafie, M.Z.A. Ab Kadir, F. Ahmad, A.R. Sadrolhosseini, Y. Sulaiman, S.A.M. Chachuli, Power conversion efficiency (PCE) performance of back-illuminated DSSCs with different Pt catalyst contents at the optimized TiO2 thickness. Optik 203, 1635 (2020). https://doi.org/10.1016/j.ijleo.2019.163567
S. Venkatesan, W.H. Lin, H. Teng, Y.L. Lee, High-efficiency bifacial dye-sensitized solar cells for application under indoor light conditions. ACS Appl. Mater. Interfaces 11, 42780–42789 (2019). https://doi.org/10.1021/acsami.9b14876
Funding
This work was supported by research program of the Tunisian Ministry of Higher Education.
Author information
Authors and Affiliations
Contributions
MI: material preparation, data collection and analysis, and original draft preparation. CO: assembling of DSScells and photovoltaic characterization. TT: reviewing and supervision.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Ethical approval and Consent to participate
Not applicable.
Consent for publication
Not applicable.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ismail, M., Olivier, C. & Toupance, T. Hybrid WO3-nanorods/TiO2 photoanodes for improved dye-sensitized solar cells performances under back illumination. J Mater Sci: Mater Electron 34, 936 (2023). https://doi.org/10.1007/s10854-023-10335-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10854-023-10335-8