Abstract
Quantitative knowledge of the distal femur morphology is critical to understanding the relation between the anatomy and function of the knee joint. Prior knowledge was contaminated by manual procedures and subjective visual inspections in extracting geometric information from image data. This article proposes a new computational framework to enable automated analysis of the distal femur articular geometry based on 3D surface data. The framework consists of a pattern recognition algorithm for sectioning the sagittal-view condyle profiles, a least-squares algorithm for fitting and analyzing the profiles, and an optimization algorithm for establishing a unified sagittal plane. An application of the proposed framework to 12 knee surface models demonstrated that it can analyze the condyle contour profiles and extract geometric measures automatically and accurately. The proposed framework also facilitated a simulation-based analysis of the uncertainty associated with conventional manual approaches, elucidating how subjective determination of the sagittal plane and flexion facet can hinder accurate understanding of the distal femur morphology and related kinematics.
Similar content being viewed by others
References
Ahn, S. J., W. Rauh, and H. J. Warnecke. Least-squares orthogonal distances fitting of circle, sphere, ellipse, hyperbola, and parabola. Pattern. Recognit. 34:2283–2303, 2001.
Churchill, D. L., S. J. Incavo, C. C. Johnson, and B. D. Beynnon. The transepicondylar axis approximates the optimal flexion axis of the knee. Clin. Orthop. Relat. Res. 356:111–118, 1998.
Cooper, C., T. Mcalindon, D. Coggon, P. Egger, and P. Dieppe. Occupational activity and osteoarthritis of the knee. Ann. Rheum. Dis. 53:90–93, 1994.
Desbrun, M., M. Meyer, M. Meyer, P. Schröder, and A. H. Barr. Implicit fairing of irregular meshes using diffusion and curvature flow. In: Proc. ACM. SIGGRAPH, 1999, 317–24, 1999.
Dieppe, P., and K. Lim. Osteoarthritis: clinical features and diagnostic problems. In: Rheumatology, edited by J. H. Klippel, and P. A. Dieppe. London: Mosby, 1998, pp. 3.1–16.
Eckhoff, D. G., J. M. Bach, V. M. Spitzer, K. D. Reinig, M. M. Bagur, et al. Three-dimensional mechanics, kinematics, and morphology of the knee viewed in virtual reality. J. Bone. Joint. Surg. 87A:71–80, 2005.
Eckhoff, D. G., J. M. Bach, V. M. Spitzer, K. D. Reinig, M. M. Bagur, et al. Three-dimensional morphology and kinematics of the distal part of the femur viewed in virtual reality. Part II. J. Bone Joint. Surg. 85A(Suppl 4):97–104, 2003.
Eckhoff, D. G., T. F. Dwyer, J. M. Bach, V. M. Spitzer, and K. D. Reinig. Three-dimensional morphology of the distal part of the femur viewed in virtual reality. J. Bone Joint. Surg. 83A(Suppl 2):43–50, 2001.
Gander, W., G. H. Golub, and R. Strebel. Least-squares fitting of circles and ellipses. BIT Numer. Math. 34:558–578, 1994.
Iwaki, H., V. Pinskerova, and M. A. Freeman. Tibiofemoral movement 1: the shapes and relative movements of the femur and tibia in the unloaded cadaver knee. J. Bone Joint. Surg. 82B:1189–1195, 2000.
Kurosawa, H., P. S. Walker, S. Abe, A. Garg, and T. Hunter. Geometry and motion of the knee for implant and orthotic design. J. Biomech. 18:487–499, 1985.
Lacoste, C., J. J. Granizo, and E. Gomez-Barrena. Reliability of a simple fluoroscopic method to study sagittal plane femorotibial contact changes in total knee arthroplasties during flexion. Knee 14:289–294, 2007.
Malek, I. A., J. D. Moorehead, Z. Abiddin, and S. C. Montgomery. The correlation between femoral condyle radii and subject height. Clin. Anat. 22:517–522, 2009.
Marr, D., and E. Hildreth. Theory of edge-detection. Proc. R. Soc. Ser. B Bio. 207:187–217, 1980.
Martelli, S., N. Lopomo, S. Greggio, E. Ferretti, and A. Visani. Development and applications of a software tool for diarthrodial joint analysis. Comput. Meth. Prog. Bio. 83:50–56, 2006.
Martelli, S., and V. Pinskerova. The shapes of the tibial and femoral articular surfaces in relation to tibiofemoral movement. J. Bone. Joint. Surg. 84B:607–613, 2002.
Martelli, S., V. Pinskerova, and A. Visani. Anatomical investigations on the knee by means of computer-dissection. J. Mech. Med. Biol. 6:55–73, 2006.
McMillan, G., and L. Nichols. Osteoarthritis and meniscus disorders of the knee as occupational diseases of miners. Occup. Environ. Med. 62:567–575, 2005.
McPherson, A., J. Karrholm, V. Pinskerova, A. Sosna, and S. Martelli. Imaging knee position using MRI, RSA/CT and 3D digitisation. J. Biomech. 38:263–268, 2005.
Mokhtarian, F., and A. K. Mackworth. A theory of multiscale, curvature-based shape representation for planar curves. IEEE. Trans. Pattern. Anal. Mach. Intell. 14:789–805, 1992.
Most, E., J. Axe, H. Rubash, and G. Li. Sensitivity of the knee joint kinematics calculation to selection of flexion axes. J. Biomech. 37:1743–1748, 2004.
Nuno, N., and A. M. Ahmed. Sagittal profile of the femoral condyles and its application to femorotibial contact analysis. J. Biomech. Eng. 123:18–26, 2001.
Nuno, N., and A. M. Ahmed. Three-dimensional morphometry of the femoral condyles. Clin. Biomech. 18:924–932, 2003.
Parenti-Castelli, V., A. Leardini, R. Di Gregorio, and J. J. O’Connor. On the modeling of passive motion of the human knee joint by means of equivalent planar and spatial parallel mechanisms. Auton. Robot. 16:219–232, 2004.
Rosin, P. L. On Serlio’s constructions of ovals. Math. Intell. 23:58–69, 2001.
Schmutz, B., K. J. Reynolds, and J. P. Slavotinek. Development and validation of a generic 3D model of the distal femur. Comput. Methods. Biomech. Biomed. Eng. 9:305–312, 2006.
Smith, P. N., K. M. Refshauge, and J. M. Scarvell. Development of the concepts of knee kinematics. Arch. Phys. Med. Rehabil. 84:1895–1902, 2003.
Treece, G. M., R. W. Prager, and A. H. Gee. Regularised marching tetrahedra: improved iso-surface extraction. Comput. Graph. 23:583–598, 1999.
Yoshida, S., K. Aoyagi, D. T. Felson, P. Aliabadi, H. Shindo, and T. I. Takemoto. Comparison of the prevalence of radiographic osteoarthritis of the knee and hand between Japan and the United States. J. Rheumatol. 29:1454–1458, 2002.
Zoghi, M., M. S. Hefzy, K. C. Fu, and W. T. Jackson. A three-dimensional morphometrical study of the distal human femur. Proc. Inst. Mech. Eng. H. 206:147–157, 1992.
Acknowledgments
This work was supported in part by a grant from NIH/NIAMS (3R01AR046387-10S1) under the American Recovery and Reinvestment Act (ARRA) of 2009.
Author information
Authors and Affiliations
Corresponding author
Additional information
Associate Editor Sean S. Kohles oversaw the review of this article.
Rights and permissions
About this article
Cite this article
Li, K., Tashman, S., Fu, F. et al. Automating Analyses of the Distal Femur Articular Geometry Based on Three-Dimensional Surface Data. Ann Biomed Eng 38, 2928–2936 (2010). https://doi.org/10.1007/s10439-010-0064-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10439-010-0064-9