Abstract
Carbon nanotubes (CNTs) have become the backbone of modern industries, including lightweight and heavy-duty industrial applications. Chemical vapor deposition (CVD) is considered as the most common method used to synthesize high yield CNTs. This work aims to develop the traditional CVD for the mass production of more economical CNTs, meeting the growing CNT demands among consumers by increasing the number of three particular reactors. All reactors housing is connected by small channels to provide the heat exchange possibility between the chambers, thereby decreasing synthesis time and reducing heat losses inside the ceramic body of the furnace. The novel design is simple and cheap with a lower reacting time and heat loss compared with the traditional CVD design. Methane, hydrogen, argon, and catalyzed iron nanoparticles were used as a carbon source and catalyst during the synthesis process. In addition, CNTs were produced using only a single quartz tube for comparison. The produced samples were examined using XRD, TEM, SEM, FTIR, and TGA. The results showed that the yield of CNTs increases by 287 % compared with those synthesized with a single quartz tube. Moreover, the total synthesis time of CNTs decreases by 37 % because of decreased heat leakage.
Similar content being viewed by others
References
Y. Gogotsi and V. Presser, Carbon Nanomaterials, Second Edition, CRC Press Book (2014).
M. A. Visco, S. Yousef, G. Galtieri, D. Nocita and J. Njuguna, Thermal, Mechanical and Rheological behaviors of nanocomposites based on UHMWPE/Paraffin Oil/Carbon Nano filler obtained by using different dispersion techniques, JOM, 68 (2016) 1078–1089, DOI: 10.1007/s11837-016-1845-x.
H. Shimoda, L. Fleming, K. Horton and O. Zhou, Formation of macroscopically ordered carbon nanotube membranes by self assembly, Physica B, 323 (2002) 135–136.
P. G. Collins and P. Avouris, Chapter 3: the electronic properties of carbon nanotubes, Contemporary Concepts of Condensed Matter Science, 3 (2008) 49–81.
A. J. Puértolas and M. S. Kurtz, Evaluation of carbon nanotubes and graphene as reinforcements for UHMWPE-based composites in arthroplastic applications: A review, Journal of the Mechanical Behavior of Biomedical Materials, 39 (2014) 129–145.
S. Ijima, Helical microtubules of graphitic carbon, Nature, 354 (1991) 56–58.
Q. Zhang, J. Huang, Q. Qian, Y. Y. Zhang and F. Wei, The road for nanomaterials industry: a review of carbon nanotube production, post-treatment, and bulk applications for composites and energy storage, Small, 9 (2013) 1237–1265.
Q. Cao and S. J. Han, Single-walled carbon nanotubes for high-performance electronics, Nanoscale, 5 (2013) 8852–8863.
S. Yousef, A. Khattab, M. Zak and A. T. Osman, Wear characterization of carbon nanotubes reinforced polymer gears, IEEE Transactions on Nanotechnology, 12 (2013) 616–620.
S. Yousef, M. A. Visco, G. Galtieri and J. Njuguna, Flexural, impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil, Polymers for Advanced Technologies (2016) DOI: 10.1002/pat.3801.
S. Yousef, A. T. Osman, H. A. Abdalla and A. G. Zohdy, Wear characterization of carbon nanotubes reinforced acetal spur, helical, bevel and worm gears using a TS universal test rig, JOM, 67 (2015) 2892–2899.
S. Yousef, Chapter 16: Polymer nanocomposite components: a case study on gears, Woodhead, Lightweight Composite Structures in Transport Design, Manufacturing, Analysis and Performance (2016) ISBN:978-1-78242-325-6.
S. A. Yousef, M. A. Visco, G. Galtieri and J. Njuguna, Wear characterizations of polyoxymethylene (POM) reinforced with carbon nanotubes (POM/CNTs) using the paraffin oil dispersion technique, JOM, 68 (2016) 288–299.
A. Shahsavar, M. R. Salimpour, M. Saghafian and M. B. Shafii, Effect of magnetic field on thermal conductivity and viscosity of a magnetic nanofluid loaded with carbon nanotubes, Journal of Mechanical Science and Technology, 30 (2) (2016) 809–815.
A. Mohamed, R. El-Sayed, T. A. Osman, S. M. Toprak, M. Muhammed and A. Uheida, Efficient composite nanofibers for solar photocatalytic degradation of organic dyes, Environ. Res., 145 (2016) 18–25, doi: 10.1016/j.envres.2015.09.024.
M. S. Hamid and F. Daneshmand, Static and dynamic pullin instability of multi-walled carbon nanotube probes by He’s iteration perturbation method, Journal of Mechanical Science and Technology, 28 (9) (2014) 3459–3469.
A. Mohamed, A. T. Osman, A. Khattab and M. Zaki, Tribological behavior of carbon nanotubes as an additive on lithium grease, Journal of Tribology, 137 (1) (2015) 011801–011805, doi:10.1115/1.4028225.
A. Mohamed, A. T. Osman, A. Khattab and M. Zaki, Rheological behavior of carbon nanotubes as an additive on lithium grease, Journal of Nanotechnology, 2013 (2013) 1–4, ID 279090 doi:10.1155/2013/279090.
M. B. Kamel, A. Mohamed, M. El Sherbiny and K. A. Abed, Rheology and thermal conductivity of calcium grease containing multi-walled carbon nanotube, Fullerenes, Nanotubes and Carbon Nanostructures, 24 (4) (2016) 260–265.
P. Estellé, S. Halelfadl and T. Maré, Thermal conductivity of CNT water based nanofluids: Experimental trends and models overview, Journal of Thermal Engineering, 2 (2015) 381–390.
S. M. S. Murshed and A. C. Nieto de Castro, Superior thermal features of carbon nanotubes-based nanofluids-A review, Renew. Sust. Energy Reviews, 37 (2014) 155–167.
S. Y. Park, S. K. Kim, J. H. Jeong, S. W. Kim, M. J. Moon and H. K. An, Low pressure synthesis of single-walled carbon nanotubes by arc discharge, Synthetic Metals, 126 (2002) 245–251.
J. H. Hafner, M. J. Bronikowski, B. R. Azamian, P. Nikolaev, A. G. Rinzler, D. T. Colbert, K. A. Smith and R. E. Smalley, Catalytic growth of single wall carbon nanotubes from metal particles, Chem. Phys. Lett., 296 (1998) 195–202.
M. Keidar and M. A. Waas, On the conditions of carbon nanotube growth in the arc discharge, Nanotechnology, 11 (2004) 1571–1575.
G. Che, B. B. Lakshmi, R. C. Martin, R. E. Fisher and S. R. Ruoff, Chemical vapor deposition based synthesis of carbon nanotubes and nanofibers using a template method, Chemistry of Materials, 10 (1998) 260–267.
K. B. Pradhan, R. A. Harutyunyan, J. U. Kim, G. Chen and C. P. Eklund, CVD synthesis of single wall carbon nanotubes, Fuel Chemistry Division Preprints, 47 (2002) 431–442.
A. Firouzi, S. Sobri, M. F. Yasin and B. F. Ahmadun, Synthesis of carbon nanotubes by chemical vapor deposition and their application for CO2 and CH4 detection, IPCBEE Press, Singapore (2011).
A. D. Dobrzanska-Danikiewicz, D. Lukowiec, D. Cichocki and W. Wolany, Carbon nanotubes manufacturing using the CVD equipment against the background of other methods, Archives of Materials Science and Engineering, 64 (2013) 103–109.
K. Koziol, O. B. Boskovic and N. Yahya, Synthesis of carbon nanostructures by CVD method, Adv. Struct. Mater., 5 (2010) 23–49.
S. Yousef, A. Khattab, A. T. Osman and M. Zaki, Fully automatic system for producing carbon nanotubes (CNTs) by using arc-discharge technique multi electrodes, ICIES (2012).
S. Yousef, A. Khattab, A. T. Osman and M. Zaki, Effects of increasing electrodes on CNTS s yield synthesized by using arc-discharge technique, Journal of Nanomaterials, 2013 (2013) 392126.
A. D. Dobrzanska-Danikiewicz, M. Pawlyta, D. Lukowiec, and W. Wolany, CVD synthesis of MWCNTs using Fe catalyst, Archives of Materials Science and Engineering, 65 (2014) 58–65.
M. A. Cassell, A. J. Raymakers, J. Kong and H. Dai, Large scale CVD synthesis of single-walled carbon nanotubes, J. Phys. Chem. B, 103 (1999) 6484–6492.
www.imatproject.eu/en/technology-111/carbon-nanotubes-124.
L. C. Qin and S. Iijima, Structure and formation of raft-like bundles of single walled helical carbon nanotubes produced by laser evaporation, Chemical Physics Letters, 269 (1997) 65–71.
S. S. M. Saravanan, K. P. S. Babu, K. Sivaprasad and M. Jagannatham, Technoeconomics of carbon nanotubes produced by open air arc discharge method, Journal of Engineering Science and Technology, 2 (2010) 100–108.
P. B. Vinayan, R. Nagar, V. Raman, N. Rajalakshmi, S. K. Dhathathreyanb and S. Ramaprabhu, Synthesis of graphenemultiwalled carbon nanotubes hybrid nanostructure by strengthvbened electrostatic interaction and its lithium ion battery application, J. Mater. Chem., 22 (2012) 9949–9956.
L. Chin, K. Andrea, P. Hongkun and M. Charles, Diametercontrolled synthesis of carbon nanotubes, J. Phys. Chem. B, 106 (2002) 2429–2433.
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Associate Editor Taesung Kim
Alaa Mohamed received his M.S. and Ph.D. degrees in Mechanical Design and Production Engineering from Cairo University, Egypt in 2009 and 2014, respectively. Afterwards, he obtained a postdoctoral fellowship in KTH Royal Institute of Technology, Department of Materials and Nanophysics, Sweden. The subject of his research is the study of photocatalytic degradation of organic days in water treatment by composite nanofibers under ultraviolet and visible light irradiation. Dr. Alaa Mohamed is currently working as a Lecturer of Machine Design at Akhbar Elyom Academy, Egypt. His research interests include the synthesis of carbon nanotubes and its applications, as well as nanolubricant and photocatalytic technology.
Samy Yousef received his M.S. and Ph.D. degrees in Mechanical Design and Production Engineering from Cairo University, Egypt in 2009 and 2014, respectively. He then obtained a postdoctoral fellowship at Department of Electrical Engineering, Industrial Engineering Chemistry, Messina University, Italy, in the field of biomaterials. Dr. Samy Yousef is currently working as a Lecturer of Machine Design at Akhbar Elyom Academy, Egypt. His research interests are in the area of carbon nanotubes, joint replacement simulators, and polymer nanocomposites for heavy duty applications.
Rights and permissions
About this article
Cite this article
Yousef, S., Mohamed, A. Mass production of CNTs using CVD multi-quartz tubes. J Mech Sci Technol 30, 5135–5141 (2016). https://doi.org/10.1007/s12206-016-1031-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-016-1031-7