SpringerLink
Log in

A review on physical vapor deposition-based metallic coatings on steel as an alternative to conventional galvanized coatings

  • Review Article
  • Published:
Journal of Coatings Technology and Research Aims and scope Submit manuscript

Abstract

An effective way to protect the steel surface from degradation is to develop a coating on top of the steel substrate. A wide variety of coating deposition processes are available to develop protective coatings on steel. To date, several processes like hot-dip galvanization (HDG), electrogalvanization (EG), and physical vapor deposition (PVD) have been investigated. Among them, the most commonly used methods are hot-dip galvanization and electrogalvanization. HDG is used extensively due to lower cost, shorter process time, the requirement of lesser maintenance, uniform protection, and ease of deposition at a larger scale. On the other hand, EG promises in providing advantages like versatility in the coating composition, good surface finish, uniformity in the coating, lower coating thickness, etc. Although both processes provide different advantages, there are always drawbacks limiting their applications. To overcome different limitations of conventional processes and for further advancement of protective coatings, PVD has received increased attention in recent years over hot dip** and electroplating. PVD process provides a more uniform deposit, higher accuracy, very low thickness, improved adhesion, a wider choice of materials, and no environmental pollution. In this paper, we review the scope and prospect of the PVD technique for the steel industry over HDG and EG. The paper focuses on different kinds of PVD techniques, their advantages, and disadvantages. An emphasis has been given to the recent development of Zn- and Al-based PVD coatings on steel substrates. The industrial competency of PVD in the steel industry has been discussed in this article. Challenges associated with the commercialization of the process and recommendations for further improvement have been discussed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

source materials, (c) inductive heating, and (d) electron beam heating

Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23

Similar content being viewed by others

References

  1. Jeans, JS, Steel: Its History, Manufacture, Properties, and Uses. London, New York, E. &. FN Spon, 1880

  2. Shimizu, T, Funakawa, Y, Kaneko, S, “High Strength Steel Sheets for Automobile Suspension and Chassis Use-High Strength Hot-Rolled Steel Sheets with Excellent Press Formability and Durability for Critical Safety Parts.” JFE Tech. Rep., 4 25–30 (2004)

    Google Scholar 

  3. Scott, C, Allain, S, Faral, M, Guelton, N, “The Development of a New Fe-Mn-C Austenitic Steel for Automotive Applications.” Revue de Métallurgie, 103 (6) 293–302 (2006)

    Article  CAS  Google Scholar 

  4. Saha Podder, A, Bhanja, A, “Applications of Stainless Steel in Automobile Industry.” Advanced Materials Research, 794 731–740 (2013). https://doi.org/10.4028/www.scientific.net/amr.794.731

  5. Kubo, Y, Hanya, K, Kodama, S, “Steel Sheet for the Better Human Life (Application for Household Electrical Appliances, OA Equipment).” Nippon Steel Tech. Rep., 101 48–56 (2012)

    Google Scholar 

  6. Hayashi, K, Koseki, T, Ogawa, T, Ikeda, R, Hatakeyama, K, “Steel Products for Construction, Industrial Machinery and Plant.” JFE Tech. Rep., 2 49–54 (2004)

    Google Scholar 

  7. Schmitt, G, “Global Needs for Knowledge Dissemination, Research, and Development in Materials Deterioration and Corrosion Control.” World Corros. Organ., 38 14 (2009)

    Google Scholar 

  8. Maurice, V, Marcus, P, “Current Developments of Nanoscale Insight Into Corrosion Protection by Passive Oxide Films.” Curr. Opin. Solid State Mater. Sci., 22 (4) 156–167 (2018)

    Article  CAS  Google Scholar 

  9. Sørensen, PA, Kiil, S, Dam-Johansen, K, Weinell, CE, “Anticorrosive Coatings: A Review.” J. Coat. Technol. Res., 6 (2) 135–176 (2009)

    Article  Google Scholar 

  10. Ryan, MP, Williams, DE, Chater, RJ, Hutton, BM, McPhail, DS, “Why Stainless Steel Corrodes.” Nature, 415 (6873) 770–774 (2002)

    Article  CAS  Google Scholar 

  11. Kim, YS, Kim, WC, Kim, JG, “Bulging Rupture and Caustic Corrosion of a Boiler Tube in a Thermal Power Plant.” Eng. Failure Anal., 104 560–567 (2019)

    Article  CAS  Google Scholar 

  12. Bertolini, L, Elsener, B, Pedeferri, P, Redaelli, E, Polder, R, Corrosion of Steel in Concrete. Wiley Online Library, 2013

  13. Orazem, M, Underground Pipeline Corrosion. Elsevier, 2014

  14. Shibli, S, Meena, B, Remya, R, “A Review on Recent Approaches in the Field of Hot Dip Zinc Galvanizing Process.” Surf. Coat. Technol., 262 210–215 (2015)

    Article  CAS  Google Scholar 

  15. Sajjadnejad, M, Mozafari, A, Omidvar, H, Javanbakht, M, “Preparation and Corrosion Resistance of Pulse Electrodeposited Zn and Zn–SiC Nanocomposite Coatings.” Appl. Surf. Sci., 300 1–7 (2014)

    Article  CAS  Google Scholar 

  16. Dutta, M, Halder, AK, Singh, SB, “Morphology and Properties of Hot Dip Zn–Mg and Zn-Mg-Al Alloy Coatings on Steel Sheet.” Surf. Coat. Technol., 205 (7) 2578–2584 (2010)

    Article  CAS  Google Scholar 

  17. Tachibana, K, Morinaga, Y, Mayuzumi, M, “Hot Dip Fine Zn and Zn–Al Alloy Double Coating for Corrosion Resistance at Coastal Area.” Corros. Sci., 49 (1) 149–157 (2007)

    Article  CAS  Google Scholar 

  18. Morimoto, Y, Honda, K, Nishimura, K, Tanaka, S, Takahashi, A, Shindo, H and Kurosaki, M, "Excellent Corrosion-Resistant Zn-Al-Mg-Si Alloy Hot-Dip Galvanized Steel Sheet" SUPER DYMA"." Shinnittetsu Giho, 22–24 (2002)

  19. Prosek, T, Persson, D, Stoulil, J, Thierry, D, “Composition of Corrosion Products Formed on Zn-Mg, Zn-Al and Zn-Al-Mg Coatings in Model Atmospheric Conditions.” Corros. Sci., 86 231–238 (2014)

    Article  CAS  Google Scholar 

  20. Chang, J-K, Lin, C-S, Wang, W-R, Jian, S-Y, “High Temperature Deformation Behaviors of Hot Dip 55 wt% Al-Zn Coated Steel.” Appl. Surf. Sci., 511 145550 (2020)

    Article  CAS  Google Scholar 

  21. Jyotheender, KS, Kumar, MKP, Srivastava, C, “Low Temperature Electrogalvanization: Texture and Corrosion Behavior.” Appl. Surf. Sci., 559 149953 (2021)

    Article  Google Scholar 

  22. Bahadormanesh, B, Ghorbani, M, Kordkolaei, NL, “Electrodeposition of Nanocrystalline Zn/Ni Multilayer Coatings from Single Bath: Influences of Deposition Current Densities and Number of Layers on Characteristics of Deposits.” Appl. Surf. Sci., 404 101–109 (2017)

    Article  CAS  Google Scholar 

  23. Shibli, SMA, Manu, R, “Improvement of Hot-Dip Zinc Coating by Enriching the Inner Layers with Iron Oxide.” Appl. Surf. Sci., 252 (8) 3058–3064 (2006)

    Article  CAS  Google Scholar 

  24. Asgari, H, Toroghinejad, MR, Golozar, MA, “On Texture, Corrosion Resistance and Morphology of Hot-Dip Galvanized Zinc Coatings.” Appl. Surf. Sci., 253 (16) 6769–6777 (2007)

    Article  CAS  Google Scholar 

  25. Lin, C-C, Huang, C-M, “Zinc-Nickel Alloy Coatings Electrodeposited by Pulse Current and Their Corrosion Behavior.” JCT Res., 3 (2) 99–104 (2006)

    CAS  Google Scholar 

  26. Kuziak, R, Kawalla, R, Waengler, S, “Advanced High Strength Steels for Automotive Industry.” Archiv. Civ. Mech. Eng., 8 (2) 103–117 (2008)

    Article  Google Scholar 

  27. De Cooman, BC, “Structure–Properties Relationship in TRIP Steels Containing Carbide-Free Bainite.” Curr. Opin. Solid State Mater. Sci., 8 (3–4) 285–303 (2004)

    Article  Google Scholar 

  28. Wasa, K, Kitabatake, M, Adachi, H, Thin Film Materials Technology: Sputtering of Control Compound Materials. Springer, 2004

  29. Levi, CG, “Emerging Materials and Processes for Thermal Barrier Systems.” Curr. Opin. Solid State Mater. Sci, 8 (1) 77–91 (2004)

    Article  CAS  Google Scholar 

  30. Mundotiya, BM, Ullah, W, Morphology Controlled Synthesis of the Nanostructured Gold by Electrodeposition Techniques. Novel Metal Electrodeposition and the Recent Application. IntechOpen London, UK, 2018

  31. Chung, PP, Wang, J, Durandet, Y, “Deposition Processes and Properties of Coatings on Steel Fasteners—A Review.” Friction, 7 (5) 389–416 (2019)

    Article  CAS  Google Scholar 

  32. Cottis, RA, "2.10-Hydrogen embrittlement." Shreir's Corrosion. Oxford: Elsevier, 902e22, 2010

  33. Monev, M, Mirkova, L, Krastev, I, Tsvetkova, H, Richtering, W, “Effect of Brighteners on Hydrogen Evolution During Zinc Electroplating from Zincate Electrolytes.” J. Appl. Electrochem., 28 (10) 1107–1112 (1998)

    Article  CAS  Google Scholar 

  34. Mirkova, L, Maurin, G, Krastev, I, Tsvetkova, C, “Hydrogen Evolution and Permeation Into Steel During Zinc Electroplating; Effect of Organic Additives.” J. Appl. Electrochem., 31 (6) 647–654 (2001)

    Article  CAS  Google Scholar 

  35. “ASTM B850-98 Standard Guide for Post-coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement.” ASTM International, 1998

  36. Navinšek, B, Panjan, P, Milošev, I, “PVD Coatings as an Environmentally Clean Alternative to Electroplating and Electroless Processes.” Surf. Coat. Technol., 116 476–487 (1999)

    Article  Google Scholar 

  37. Ahner, C, Maaß, P, Peißker, P, Handbook of Hot-dip Galvanization. Wiley, 2011

  38. Saarimaa, V, Lange, C, Paunikallio, T, Kaleva, A, Nikkanen, J-P, Levänen, E, Väisänen, P, Markkula, A, “Evaluation of Surface Activity of Hot-Dip Galvanized Steel After Alkaline Cleaning.” J. Coat. Technol. Res., 17 (1) 285–292 (2020)

    Article  CAS  Google Scholar 

  39. Zhang, J, Jiang, S-m, Zhang, Q-f, Liu, C-s, “Effect of Temperature on Microstructure and Formability of Al-10 Mass% Si Coatings.” J. Iron Steel Res. Int., 23 (3) 270–275 (2016)

    Article  Google Scholar 

  40. Li, Y, “Formation of Nano-Crystalline Corrosion Products on Zn–Al Alloy Coating Exposed to Seawater.” Corros. Sci., 43 (9) 1793–1800 (2001)

    Article  CAS  Google Scholar 

  41. Manna, M, Naidu, G, Rani, N, Bandyopadhyay, N, “Characterisation of Coating on Rebar Surface Using Hot-Dip Zn and Zn-4.9 Al-0.1 Misch Metal Bath.” Surf. Coat. Technol., 202 (8) 1510–1516 (2008)

    Article  CAS  Google Scholar 

  42. Manna, M, “Effect of Fluxing Chemical: An Option for Zn–5wt% Al Alloy Coating on Wire Surface by Single Hot Dip Process.” Surf. Coat. Technol., 205 (12) 3716–3721 (2011)

    Article  CAS  Google Scholar 

  43. Sullivan, J, Penney, D, Elvins, J, Khan, K, “The Effect of Ultrasonic Irradiation on the Microstructure and Corrosion Rate of a Zn-4.8 wt% Al Galvanising Alloy Used in High Performance Construction Coatings.” Surf. Coat. Technol., 306 480–489 (2016)

    Article  CAS  Google Scholar 

  44. Saravanan, P, Srikanth, S, “Surface Defects and Their Control in Hot Dip Galvanized and Galvannealed Sheets.” Int. J. Adv. Res. Chem. Sci. (Ijarcs), 5 (11) 11–23 (2018)

    Google Scholar 

  45. Yasakau, KA, Giner, I, Vree, C, Ozcan, O, Grothe, R, Oliveira, A, Grundmeier, G, Ferreira, MGS, Zheludkevich, ML, “Influence of Strip** and Cooling Atmospheres on Surface Properties and Corrosion of Zinc Galvanizing Coatings.” Appl. Surf. Sci., 389 144–156 (2016)

    Article  CAS  Google Scholar 

  46. Marder, AR, “The Metallurgy of Zinc-Coated Steel.” Progress Mater. Sci., 45 (3) 191–271 (2000)

    Article  CAS  Google Scholar 

  47. Azimi, A, Ashrafizadeh, F, Toroghinejad, MR, Shahriari, F, “Metallurgical Assessment of Critical Defects in Continuous Hot Dip Galvanized Steel Sheets.” Surf. Coat. Technol., 206 (21) 4376–4383 (2012)

    Article  CAS  Google Scholar 

  48. Dong, AP, Da, S, Wang, J, Sun, BD, Shen, JG, Ren, YS, Lu, YL, Yin, XD, “Separation Behaviour of Zinc Dross from Hot Dip Galvanising Melts of Different Aluminium Concentrations by Alternating Magnetic Field.” Ironmak. Steelmak., 36 (4) 316–320 (2009)

    Article  CAS  Google Scholar 

  49. Dong, AP, Shu, D, Wang, J, Sun, BD, “Identification of Fe-Al-Zn Dross Phase in Galvanised Zinc Bath and Its Separation by Method of Alternating Magnetic Field.” Ironmak. Steelmak., 35 (8) 633–637 (2008)

    Article  CAS  Google Scholar 

  50. Ouyang, MH, Li, Z, Wang, XM, Yin, FC, Wang, JH, Su, XP, “Control of Bottom Dross in 55% Al-Zn Bath.” Mater. Sci. Eng. Powder Metall., 13 (3) 139–144 (2008)

    Google Scholar 

  51. Wint, N, Leung, J, Sullivan, J, Penney, D, Gao, Y, “The Galvanic Corrosion of Welded Ultra-High Strength Steels Used for Automotive Applications.” Corros. Sci., 136 366–373 (2018)

    Article  CAS  Google Scholar 

  52. Liu, H, Li, F, Shi, W, Swaminathan, S, He, Y, Rohwerder, M, Li, L, “Challenges in Hot-Dip Galvanizing of High Strength Dual Phase Steel: Surface Selective Oxidation and Mechanical Property Degradation.” Surf. Coat. Technol., 206 (16) 3428–3436 (2012)

    Article  CAS  Google Scholar 

  53. Mintz, B, “Hot Dip Galvanising of Transformation Induced Plasticity and Other Intercritically Annealed Steels.” Int. Mater. Rev., 46 (4) 169–197 (2001)

    Article  CAS  Google Scholar 

  54. Swaminathan, S, Spiegel, M, “Thermodynamic and Kinetic Aspects on the Selective Surface Oxidation of Binary, Ternary and Quarternary Model Alloys.” Appl. Surf. Sci., 253 (10) 4607–4619 (2007)

    Article  CAS  Google Scholar 

  55. Vanden Eynde, X, Servais, JP, Lamberigts, M, “Investigation into the Surface Selective Oxidation of Dual-Phase Steels by XPS, SAM and SIMS.” Surf. Interface Anal., 35 (12) 1004–1014 (2003)

    Article  CAS  Google Scholar 

  56. MAO, W, “Oxidation Phenomena in Advanced High Strength Steels: Modelling and Experiment.” (2018). https://doi.org/10.4233/uuid:3e978189-4fd7-4358-840e-b995416bedef

  57. Pahade, VS, Chavan, PS, Baisane, VP, “A Review Paper on Vapour Deposition Coating.” Int. J. Eng. Appl. Sci., 3 (6) 257640 (2016)

    Google Scholar 

  58. Mattox, DM, “Particle Bombardment Effects on Thin-Film Deposition: A Review.” J. Vac. Sci. Technol. A Vac. Surf. Films, 7 (3) 1105–1114 (1989)

    Article  CAS  Google Scholar 

  59. Baptista, A, Silva, F, Porteiro, J, Míguez, J, Pinto, G, “Sputtering Physical Vapour Deposition (PVD) Coatings: A Critical Review on Process Improvement and Market Trend Demands.” Coatings, 8 (11) 402 (2018)

    Article  Google Scholar 

  60. Baptista, A, Silva, FJG, Porteiro, J, Míguez, JL, Pinto, G, Fernandes, L, “On the Physical Vapour Deposition (PVD): Evolution of Magnetron Sputtering Processes for Industrial Applications.” Procedia Manuf., 17 746–757 (2018)

    Article  Google Scholar 

  61. Zhang, M, Ma, X, Yin, J, Zhang, Y, Zhang, L, Wen, J, Dai, L, Kuang, R, Chen, H, Weng, X, “Microstructure, Infrared Optical Properties and Thermal Stability of ZrB2 and Double-Layer-Structure Al2O3/ZrB2 Thin Films by Magnetron Sputtering Technique.” Appl. Surf. Sci., 532 147280 (2020)

    Article  CAS  Google Scholar 

  62. Bondarev, AV, Antonyuk, MN, Kiryukhantsev-Korneev, PV, Polcar, T, Shtansky, DV, “"Insight into High Temperature Performance of Magnetron Sputtered Si-Ta-C-(N) Coatings with an Ion-Implanted Interlayer.” Appl. Surf. Sci., 541 148526 (2021)

    Article  CAS  Google Scholar 

  63. Kukla, R, Ludwig, R, Meinel, J, “Overview on Modern Vacuum Web Coating Technology.” Surf. Coat. Technol., 86 753–761 (1996)

    Article  Google Scholar 

  64. Weirather, T, Czettl, C, Polcik, P, Kathrein, M, Mitterer, C, “Industrial-Scale Sputter Deposition of Cr1−xAlxN Coatings with 0.21≤ x≤ 0.74 from Segmented Targets.” Surf. Coat. Technol., 232 303–310 (2013)

    Article  CAS  Google Scholar 

  65. Vossen, JL, “Control of Film Properties by rf-Sputtering Techniques.” J. Vac. Sci. Technol., 8 (5) S12–S30 (1971)

    Article  CAS  Google Scholar 

  66. Anders, A, “A Review Comparing Cathodic Arcs and High Power Impulse Magnetron Sputtering (HiPIMS).” Surf. Coat. Technol., 257 308–325 (2014)

    Article  CAS  Google Scholar 

  67. Lin, J, Sproul, WD, Moore, JJ, Wu, Z, Lee, S, Chistyakov, R, Abraham, B, “Recent Advances in Modulated Pulsed Power Magnetron Sputtering for Surface Engineering.” Jom, 63 (6) 48–58 (2011)

    Article  Google Scholar 

  68. Maurya, DK, Sardarinejad, A, Alameh, K, “Recent Developments in RF Magnetron Sputtered Thin Films for pH Sensing Applications—An Overview.” Coatings, 4 (4) 756–771 (2014)

    Article  Google Scholar 

  69. Zafar, MS, Farooq, I, Awais, M, Najeeb, S, Khurshid, Z, Zohaib, S, “Bioactive Surface Coatings for Enhancing Osseointegration of Dental Implants.” Biomedical, Therapeutic and Clinical Applications of Bioactive Glasses, pp. 313–329. Elsevier, 2019

  70. Dan, A, Chattopadhyay, K, Barshilia, HC, Basu, B, “Thermal Stability of WAlN/WAlON/Al2O3-Based Solar Selective Absorber Coating.” MRS Adv., 1 (41) 2807–2813 (2016)

    Article  CAS  Google Scholar 

  71. Dan, A, Soum-Glaude, A, Carling-Plaza, A, Ho, CK, Chattopadhyay, K, Barshilia, HC, Basu, B, “Temperature-and Angle-Dependent Emissivity and Thermal Shock Resistance of the W/WAlN/WAlON/Al2O3-Based Spectrally Selective Absorber.” ACS Appl. Energy Mater., 2 (8) 5557–5567 (2019)

    Article  CAS  Google Scholar 

  72. Kola, PV, Daniels, S, Cameron, DC, Hashmi, MSJ, “Magnetron Sputtering of TiN Protective Coatings for Medical Applications.” J. Mater. Process. Technol., 56 (1–4) 422–430 (1996)

    Article  Google Scholar 

  73. Sade, G, Pelleg, J, “Co-Sputtered TiB2 as a Diffusion Barrier for Advanced Microelectronics with Cu Metallization.” Appl. Surf. Sci., 91 (1–4) 263–268 (1995)

    Article  CAS  Google Scholar 

  74. Grao, M, Redfern, J, Kelly, PJ, Ratova, M, “Magnetron Co-Sputtered Bi12TiO20/Bi4Ti3O12 Composite—An Efficient Photocatalytic Material with Photoinduced Oxygen Vacancies for Water Treatment Application.” Appl. Surf. Sci., 552 149486 (2021)

    Article  CAS  Google Scholar 

  75. Bello, M, Shanmugan, S, “Achievements in Mid and High-temperature Selective Absorber Coatings by Physical Vapor Deposition (PVD) for Solar Thermal Application—A Review.” J. Alloys Compd., 839 155510 (2020)

    Article  CAS  Google Scholar 

  76. Bräuer, G, Szyszka, B, Vergöhl, M, Bandorf, R, “Magnetron Sputtering–Milestones of 30 Years.” Vacuum, 84 (12) 1354–1359 (2010)

    Article  Google Scholar 

  77. Dan, A, Chattopadhyay, K, Barshilia, HC, Basu, B, “Shifting of the Absorption Edge in TiB2/TiB (N)/Si3N4 Solar Selective Coating for Enhanced Photothermal Conversion.” Solar Energy, 173 192–200 (2018)

    Article  CAS  Google Scholar 

  78. Howson, RP, “The Reactive Sputtering of Oxides and Nitrides.” Pure Appl. Chem., 66 (6) 1311–1318 (1994)

    Article  CAS  Google Scholar 

  79. Sproul, WD, “Reactive Sputter Deposition of Polycrystalline Nitride and Oxide Superlattice Coatings.” Surf. Coat. Technol., 86 170–176 (1996)

    Article  Google Scholar 

  80. Cevro, M, Carter, G, “Ion Beam Sputtering and Dual Ion Beam Sputtering of Titanium Oxide Films.” J. Phys. D Appl. Phys., 28 (9) 1962 (1995)

    Article  CAS  Google Scholar 

  81. Becker, M, Gies, M, Polity, A, Chatterjee, S, Klar, PJ, “Materials Processing Using Radio-Frequency Ion-Sources: Ion-Beam Sputter-Deposition and Surface Treatment.” Rev. Sci Instrum., 90 (2) 023901 (2019)

    Article  CAS  Google Scholar 

  82. Holland, L, “A Review of Some Recent Vacuum Studies (Related to Pumps and Ion Beam Sputtering Systems).” Vacuum, 20 (5) 175–192 (1970)

    Article  CAS  Google Scholar 

  83. Weissmantel, C, Fiedler, O, Hecht, G, Reisse, G, “Ion Beam Sputtering and Its Application for the Deposition of Semiconducting Films.” Thin Solid Films, 13 (2) 359–366 (1972)

    Article  CAS  Google Scholar 

  84. Bundesmann, C, Neumann, H, “Tutorial: The Systematics of Ion Beam Sputtering for Deposition of Thin Films with Tailored Properties.” J. Appl. Phys., 124 (23) 231102 (2018)

    Article  Google Scholar 

  85. Kong, P, Pu, Y, Ma, P, Zhu, J, “Relationship Between Oxygen Defects and Properties of Scandium Oxide Films Prepared by Ion-Beam Sputtering.” Coatings, 9 (8) 517 (2019)

    Article  CAS  Google Scholar 

  86. Lofgran, SC, Thin Film Deposition & Vacuum Technology. Brigham Young University–Idaho, 2013

  87. Adeyeye, AO, Shimon, G, Growth and Characterization of Magnetic Thin Film and Nanostructures. Handbook of Surface Science, pp. 1–41. Elsevier, 2015

  88. Safarian, J, Engh, TA, “Vacuum Evaporation of Pure Metals.” Metall. Mater. Trans. A, 44 (2) 747–753 (2013)

    Article  CAS  Google Scholar 

  89. Wang, X, Wang, X, Wang, D, Zhao, M, Han, F, “A Novel Approach to Fabricate Zn Coating on Mg Foam Through a Modified Thermal Evaporation Technique.” J. Mater. Sci. Technol., 34 (9) 1558–1563 (2018)

    Article  CAS  Google Scholar 

  90. Mezher, SJ, Kadhim, KJ, Abdulmunem, OM, Mejbel, MK, “Microwave Properties of Mg–Zn Ferrite Deposited by the Thermal Evaporation Technique.” Vacuum, 173 109114 (2020)

    Article  CAS  Google Scholar 

  91. Durdu, S, Aktug, SL, Aktas, S, Yalcin, E, Cavusoglu, K, Altinkok, A, Usta, M, “Characterization and In Vitro Properties of Anti-Bacterial Ag-Based Bioceramic Coatings Formed on Zirconium by Micro Arc Oxidation and Thermal Evaporation.” Surf. Coat. Technol., 331 107–115 (2017)

    Article  CAS  Google Scholar 

  92. Dai, ZR, Pan, ZW, Wang, ZL, “Novel Nanostructures of Functional Oxides Synthesized by Thermal Evaporation.” Adv. Funct. Mater., 13 (1) 9–24 (2003)

    Article  Google Scholar 

  93. Einstein, A, "Vacuum Evaporation." Preparation of Thin Films, 1, 1992

  94. Kolpakov, VA, Krichevsky, SV, Podlipnov, VV, “A Resistive Dynamic Evaporator for Multicomponent Materials.” Instrum. Exp. Tech., 60 (2) 297–300 (2017)

    Article  Google Scholar 

  95. Adams, TM, Kirkpatrick, SR, Wang, Z, Siahmakoun, A, “NiTi Shape Memory Alloy Thin Films Deposited by Co-Evaporation.” Mater. Lett., 59 (10) 1161–1164 (2005)

    Article  CAS  Google Scholar 

  96. Aqili, AKS, Ali, Z, Maqsood, A, “Optical and Structural Properties of Two-Sourced Evaporated ZnTe Thin Films.” Appl. Surf. Sci., 167 (1–2) 1–11 (2000)

    Article  CAS  Google Scholar 

  97. Giustozzi, F, “Novel Magnetically Induced Healing in Road Pavements.” Eco-Efficient Pavement Construction Materials, pp. 315–336. Elsevier, 2020

  98. Kuzmichev, A, Tsybulsky, L, Grundas, S, “Evaporators with Induction Heating and Their Applications.” In: Advances in Induction and Microwave Heating of Mineral and Organic Materials, pp. 269–302, 2011

  99. Greene, GA, Finfrock, CC, Vaporization of Tungsten-Metal in Steam At High Temperatures. Brookhaven National Lab., Upton, NY (US), 2000

  100. Guo, J, Jia, J, Liu, Y, Liu, G, Su, Y, Ding, H, “Evaporation Behavior of Aluminum During the Cold Crucible Induction Skull Melting of Titanium Aluminum Alloys.” Metall. Mater. Trans. B, 31 (4) 837–844 (2000)

    Article  Google Scholar 

  101. Savov, L, Janke, D, “Evaporation of Cu and Sn from Induction-Stirred Iron-Based Melts Treated at Reduced Pressure.” ISIJ Int., 40 (2) 95–104 (2000)

    Article  CAS  Google Scholar 

  102. Hömberg, D, Liu, Q, Montalvo-Urquizo, J, Nadolski, D, Petzold, T, Schmidt, A, Schulz, A, “Simulation of Multi-Frequency-Induction-Hardening Including Phase Transitions and Mechanical Effects.” Finite Elements Anal. Des., 121 86–100 (2016)

    Article  Google Scholar 

  103. La, JH, Bae, KT, Lee, SY, Song, MK, Nam, KH, Jung, YH, “Coil Design Optimization for An Induction Evaporation Process: Simulation and Experiment.” J. Mech. Sci. Technol., 30 (10) 4417–4421 (2016)

    Article  Google Scholar 

  104. Royer, Z, Optimizing Electromagnetic Levitation Design to Enhance Thermodynamic Measurement. 2012

  105. Frohberg, MG, “Thirty Years of Levitation Melting Calorimetry—A Balance.” Thermochim. Acta, 337 (1–2) 7–17 (1999)

    Article  CAS  Google Scholar 

  106. Lv, Q, Jiang, H, Jiao, X, Liu, J, Liu, J, Yang, Z, “Simulation Analysis and Experimental Study of the Temperature Characteristics of Electromagnetic Levitation.” AIP Adv., 8 (10) 105127 (2018)

    Article  Google Scholar 

  107. Kim, T-Y, Goodenough, M, “Simultaneous Co-Deposition of Zn-Mg Alloy Layers on Steel Strip by PVD Process.” Corros. Sci. Technol., 10 (6) 194–198 (2011)

    Google Scholar 

  108. Jeong, U, Nam, G-H, Eom, M-J, Kim, T-Y, “High Speed Zinc Coating by EML-PVD Process.” Proceedings of the Korean Institute of Surface Engineering Conference, 2012

  109. Singh, J, Wolfe, DE, “Review Nano and Macro-Structured Component Fabrication by Electron Beam-Physical Vapor Deposition (EB-PVD).” J. Mater. Sci., 40 (1) 1–26 (2005)

    Article  CAS  Google Scholar 

  110. Azimirad, R, Akhavan, O, Moshfegh, AZ, “Influence of Coloring Voltage and Thickness on Electrochromical Properties of e-Beam Evaporated WO3 Thin Films.” J. Electrochem. Soc., 153 (2) E11 (2005)

    Article  Google Scholar 

  111. Barna, PB, Barcza, G, Toth, L, Vincze, G, Bergauer, A, Bangert, H, “Structural Evolution in Codeposited Al-Sn Thin Films.” Surf. Coat. Technol., 57 (1) 7–11 (1993)

    Article  CAS  Google Scholar 

  112. Levit, M, Grimberg, I, Weiss, BZ, “Residual Stresses in Ceramic Plasma-sprayed Thermal Barrier Coatings: Measurement and Calculation.” Mater. Sci. Eng. A, 206 (1) 30–38 (1996)

    Article  Google Scholar 

  113. Sun, Y, Lin, X, He, X, Zhang, J, Li, M, Song, G, Li, X, Zhao, Y, “Effects of Substrate Rotation on the Microstructure of Metal Sheet Fabricated by Electron Beam Physical Vapor Deposition.” Appl. Surf. Sci., 255 (11) 5831–5836 (2009)

    Article  CAS  Google Scholar 

  114. Wolfe, DE, Singh, J, Narasimhan, K, “Synthesis and Characterization of Multilayered TiC/TiB2 Coatings Deposited by Ion Beam Assisted, Electron Beam–Physical Vapor Deposition (EB-PVD).” Surf. Coat. Technol., 165 (1) 8–25 (2003)

    Article  CAS  Google Scholar 

  115. Al-Kuhaili, MF, Durrani, SMA, Khawaja, EE, “Characterization of Hafnium Oxide Thin Films Prepared by Electron Beam Evaporation.” J. Phys. D Appl. Phys., 37 (8) 1254 (2004)

    Article  CAS  Google Scholar 

  116. Huang, H-H, Liu, Y-S, Chen, Y-M, Huang, M-C, Wang, M-C, “Effect of Oxygen Pressure on the Microstructure and Properties of the Al2O3–SiO2 Thin Films Deposited by E-Beam Evaporation.” Surf. Coat. Technol., 200 (10) 3309–3313 (2006)

    Article  CAS  Google Scholar 

  117. Myburg, G, Auret, FD, “Influence of the Electron Beam Evaporation Rate of Pt and the Semiconductor Carrier Density on the Characteristics of Pt/n-GaAs Schottky Contacts.” J. Appl. Phys., 71 (12) 6172–6176 (1992)

    Article  CAS  Google Scholar 

  118. Shen, Z, Liu, Z, Mu, R, He, L, Liu, G, Huang, Z, “LaGdZrO/YSZ Thermal Barrier Coatings by EB-PVD: Microstructure, Thermal Properties and Failure Mechanism.” Chem. Eng. J. Adv., 5 100073 (2021)

    Article  Google Scholar 

  119. Yi, J, He, X, Sun, Y, Li, Y, “Electron Beam-Physical Vapor Deposition of SiC/SiO2 High Emissivity Thin Film.” Appl. Surf. Sci., 253 (9) 4361–4366 (2007)

    Article  CAS  Google Scholar 

  120. Ustinov, A, Olikhovska, L, Melnichenko, T, Shyshkin, A, “Effect of Overall Composition on Thermally Induced Solid-State Transformations in Thick EB PVD Al/Ni Multilayers.” Surf. Coat. Technol., 202 (16) 3832–3838 (2008)

    Article  CAS  Google Scholar 

  121. Yao, C, Wang, Z, Tay, SL, Zhu, T, Gao, W, “Effects of Mg on Microstructure and Corrosion Properties of Zn-Mg Alloy.” J. Alloys Compd., 602 101–107 (2014)

    Article  CAS  Google Scholar 

  122. Li, B, Dong, A, Zhu, G, Chu, S, Qian, H, Hu, C, Sun, B, Wang, J, “Investigation of the Corrosion Behaviors of Continuously Hot-Dip Galvanizing Zn-Mg Coating.” Surf. Coat. Technol., 206 (19–20) 3989–3999 (2012)

    Article  CAS  Google Scholar 

  123. Kwak, Y-j, Lee, D-y, Nam, K-h, Lee, S-c, Jung, Y-h, Jung, W-s, Park, S-h, Kim, T-y and Kim, G-s, “Zinc Alloy Coated Steel Sheet Having Good Sealer Adhesion and Corrosion Resistance and Process of Manufacturing the Same.” Google Patents, 2016

  124. Dong, A, Li, B, Lu, Y, Zhu, G, **ng, H, Shu, D, Sun, B, Wang, J, “Effect of Mg on the Microstructure and Corrosion Resistance of the Continuously Hot-Dip Galvanizing Zn-Mg Coating.” Materials, 10 (8) 980 (2017)

    Article  Google Scholar 

  125. Vimalanandan, A, Bashir, A, Rohwerder, M, “Zn-Mg and Zn-Mg-Al Alloys for Improved Corrosion Protection of Steel: Some New Aspects.” Mater. Corros., 65 (4) 392–400 (2014)

    Article  CAS  Google Scholar 

  126. Shimogori, K, Satoh, H, Toyama, M, Shimoto, H, Ikeda, K, Kawahuku, J, Miyake, S, Nomura, S, Sakai, H, “Zn-Mg Alloy Vapor Deposition Plated Metals of High Corrosion Resistance, as Well as Method of Producing Them.” Google Patents, 1991

  127. Song, M, Kim, H, Lee, S, “Effect of a Zn Interlayer on the Adhesion Strength and Corrosion Resistance of Zn-Mg Coated TRIP Steel.” ISIJ Int., 59 (6) 1113–1118 (2019)

    Article  CAS  Google Scholar 

  128. Peng, J, Zhong, L, Wang, Y, Lu, Y, Pan, F, “Effect of Extrusion Temperature on the Microstructure and Thermal Conductivity of Mg-2.0 Zn-1.0 Mn-0.2 Ce Alloys.” Mater. Des., 87 914–919 (2015)

    Article  CAS  Google Scholar 

  129. Dai, Y, Li, J, Liu, B, “First-Principles Molecular Dynamics Simulations to Study the Crystal-to-Amorphous Transition in the Mg-Zn System.” Intermetallics, 29 75–79 (2012)

    Article  CAS  Google Scholar 

  130. La, J, Lee, S, Hong, S, “Synthesis of Zn-Mg Coatings Using Unbalanced Magnetron Sputtering and Theirs Corrosion Resistance.” Surf. Coat. Technol., 259 56–61 (2014)

    Article  CAS  Google Scholar 

  131. La, J, Song, M, Kim, H, Lee, S, Jung, W, “Effect of Deposition Temperature on Microstructure, Corrosion Behavior and Adhesion Strength of Zn-Mg Coatings on Mild Steel.” J. Alloys Compd., 739 1097–1103 (2018)

    Article  CAS  Google Scholar 

  132. Volovitch, P, Allely, C, Ogle, K, “Understanding Corrosion via Corrosion Product Characterization: I. Case Study of the Role of Mg Alloying in Zn-Mg Coating on Steel.” Corros. Sci., 51 (6) 1251–1262 (2009)

    Article  CAS  Google Scholar 

  133. Prosek, T, Nazarov, A, Bexell, U, Thierry, D, Serak, J, “Corrosion Mechanism of Model Zinc–Magnesium Alloys in Atmospheric Conditions.” Corros. Sci., 50 (8) 2216–2231 (2008)

    Article  CAS  Google Scholar 

  134. Byun, JM, Yu, JM, Kim, DK, Kim, T-Y, Jung, W-S, Kim, YD, “Corrosion Behavior of Mg2Zn11 and MgZn2 Single Phases.” J. Korean Inst. Met. Mater, 51 413–419 (2013)

    Article  CAS  Google Scholar 

  135. Kim, SJ, Kwak, YJ, Kim, TY, Jung, WS, Kim, KY, “Surface Darkening Phenomenon of Zn-Mg Alloy Coated Steel Exposed to Aqueous Environment at High Temperature.” J. Mater. Res., 30 (23) 3605 (2015)

    Article  CAS  Google Scholar 

  136. Byun, JM, Bang, S-R, Kim, HW, Kim, T-Y, Hong, S-J, Do Kim, Y, “Effect of Heat Treatment on Corrosion Resistance and Adhesion Property in Zn-Mg-Zn Multi-Layer Coated Steel Prepared by PVD Process.” Surf. Coat. Technol., 309 1010–1014 (2017)

    Article  CAS  Google Scholar 

  137. Leyland, A, Matthews, A, “Design Criteria for Wear-Resistant Nanostructured and Glassy-Metal Coatings.” Surf. Coat. Technol., 177 317–324 (2004)

    Article  Google Scholar 

  138. Persson, D, Thierry, D, LeBozec, N, Prosek, T, “In Situ Infrared Reflection Spectroscopy Studies of the Initial Atmospheric Corrosion of Zn-Al-Mg Coated Steel.” Corros. Sci., 72 54–63 (2013)

    Article  CAS  Google Scholar 

  139. Schuhmacher, B, Schwerdt, C, Seyfert, U, Zimmer, O, “Innovative Steel Strip Coatings by Means of PVD in a Continuous Pilot Line: Process Technology and Coating Development.” Surf. Coat. Technol., 163 703–709 (2003)

    Article  Google Scholar 

  140. Hosking, N, Ström, M, Shipway, P, Rudd, C, “Corrosion Resistance of Zinc–Magnesium Coated Steel.” Corros. Sci., 49 (9) 3669–3695 (2007)

    Article  CAS  Google Scholar 

  141. Chaleix, D, Allely, C, Silberberg, E, Pace, S, Gaouyat, L, A Coated Metallic Substrate. WO 2019/ 043424A1 Arcelormittal, 2019

  142. Thomas, S, Medhekar, NV, Frankel, GS, Birbilis, N, “Corrosion Mechanism and Hydrogen Evolution on Mg.” Curr. Opin. Solid State Mater. Sci., 19 (2) 85–94 (2015)

    Article  CAS  Google Scholar 

  143. Koll, T, Ullrich, K, Faderl, J, Hagler, J, Spalek, A, “Properties and Potential Applications of ZnMg-alloy-coatings on Steel Sheet by PVD.” Proc. Proceedings of the Galvatech, 2004

  144. Yao, C, Chen, W, Gao, W, “Codeposited Zn-Mg Coating with Improved Mechanical and Anticorrosion Properties.” Surf. Coat. Technol., 219 126–130 (2013)

    Article  CAS  Google Scholar 

  145. **, Z-G, Zhang, Q-F, Jiang, S-M, Yu, G-Q, “Effect of the Process Parameters on the Microstructure and Corrosion Resistance of ZnMg Alloy Coatings Prepared via a Combined PVD and Reaction-Diffusion Process.” Surf. Coat. Technol., 306 418–427 (2016)

    Article  CAS  Google Scholar 

  146. Lee, M-H, Kim, Y-W, Lim, K-M, Lee, S-H, Moon, K-M, “Electrochemical Evaluation of Zinc and Magnesium Alloy Coatings Deposited on Electrogalvanized Steel by PVD.” Trans. Nonferrous Metals Soc. China, 3 (23) 876–880 (2013)

    Article  Google Scholar 

  147. Hayashi, H, Nakagawa, T, “Recent Trends in Sheet Metals and Their Formability in Manufacturing Automotive Panels.” J. Mater. Process. Technol., 46 (3–4) 455–487 (1994)

    Article  Google Scholar 

  148. Ye, M, Delplancke, J-L, Berton, G, Segers, L, Winand, R, “Characterization and Adhesion Strength Study of Zn Coatings Electrodeposited on Steel Substrates.” Surf. Coat. Technol., 105 (1–2) 184–188 (1998)

    Article  CAS  Google Scholar 

  149. Jung, WS, Lee, CW, Kim, TY, De Cooman, BC, “Mg Content Dependence of EML-PVD Zn-Mg Coating Adhesion on Steel Strip.” Metall. Mater. Trans. A, 47 (9) 4594–4605 (2016)

    Article  CAS  Google Scholar 

  150. Sabooni, S, Ahmadi, M, Galinmoghaddam, E, Westerwaal, R, Boelsma, C, Zoestbergen, E, Song, G, Pei, Y, “Fundamentals of the Adhesion of Physical Vapor Deposited ZnMg-Zn Bilayer Coatings to Steel Substrates.” Mater. Des., 190 108560 (2020)

    Article  CAS  Google Scholar 

  151. Ghosh, P, Mezbahul-Islam, M, Medraj, M, “Critical Assessment and Thermodynamic Modeling of Mg-Zn, Mg-Sn, Sn-Zn and Mg-Sn-Zn Systems.” Calphad, 36 28–43 (2012)

    Article  CAS  Google Scholar 

  152. Zoestbergen, E, Van De Langkruis, J, Maalman, T, Batyrev, E, “Influence of Diffusion on the Coating Adhesion of Zinc-Magnesium Thin Films onto Steel.” Surf. Coat. Technol., 309 904–910 (2017)

    Article  CAS  Google Scholar 

  153. Sabooni, S, Galinmoghaddam, E, Ahmadi, M, Westerwaal, R, Van de Langkruis, J, Zoestbergen, E, De Hosson, JTM, Pei, Y, “Microstructure and Adhesion Strength Quantification of PVD Bi-Layered ZnMg-Zn Coatings on DP800 Steel.” Surf. Coat. Technol., 359 227–238 (2019)

    Article  CAS  Google Scholar 

  154. Sabooni, S, Galinmoghaddam, E, Cao, H, Westerwaal, R, Zoestbergen, E, De Hosson, JTM, Pei, Y, “New Insight into the Loss of Adhesion of ZnMgZn bi-Layered Coatings on Steel Substrates.” Surf. Coat. Technol., 370 35–43 (2019)

    Article  CAS  Google Scholar 

  155. Lee, M, Bae, I, Kwak, Y, Moon, K, “Effect of Interlayer Insertion on Adhesion Properties of Zn-Mg Thin Films on Steel Substrate by PVD Method.” Curr. Appl. Phys., 12 S2–S6 (2012)

    Article  Google Scholar 

  156. Sabooni, S, Galinmoghaddam, E, Turkin, AA, Lu, LQ, Westerwaal, RJ, Boelsma, C, Zoestbergen, E, Pei, YT, “Tailoring Vapor-Deposited ZnMg–Zn Bilayer Coating for Steels by Diffusion-Driven Phase Transformation.” J. Alloys Compd., 836 155448 (2020)

    Article  CAS  Google Scholar 

  157. Mizuno, T, Mulki, H, “Changes in Surface Texture of Zinc-Coated Steel Sheets Under Plastic Deformation.” Wear, 198 (1–2) 176–184 (1996)

    Article  CAS  Google Scholar 

  158. Safaeirad, M, Toroghinejad, MR, Ashrafizadeh, F, “Effect of Microstructure and Texture on Formability and Mechanical Properties of Hot-Dip Galvanized Steel Sheets.” J. Mater. Process. Technol., 196 (1–3) 205–212 (2008)

    Article  CAS  Google Scholar 

  159. Meuleman, DJ, Denner, SG and Cheng, FL, “The Effect of Zinc Coatings on the Formability of Automotive Sheet Steels.” SAE Trans., 910–917 (1984)

  160. Gronostajski, JZ, Gronostajski, ZJ, “Formability, Damage and Corrosion Resistance of Coated Steel Sheets.” In: Studies in Applied Mechanics, pp. 203–218. Elsevier, 1995

  161. La, J, Bae, K, Lee, S, Nam, K, “A Hybrid Test Method to Evaluate the Adhesion Characteristics of Soft Coatings on Steel Substrates–Application to Zn-Mg Coated Steel.” Surf. Coat. Technol., 307 1100–1106 (2016)

    Article  CAS  Google Scholar 

  162. Guzman, L, Adami, M, Gissler, W, Klose, S, De Rossi, S, “Vapour Deposited Zn-Cr Alloy Coatings for Enhanced Manufacturing and Corrosion Resistance of Steel Sheets.” Surf. Coat. Technol., 125 (1–3) 218–222 (2000)

    Article  CAS  Google Scholar 

  163. Chen, W, Liu, Q, Liu, Q, Zhu, L, Wang, L, “A Combinatorial Study of the Corrosion and Mechanical Properties of Zn-Al Material Library Fabricated by Ion Beam Sputtering.” J. Alloys Compd., 459 (1–2) 261–266 (2008)

    Article  CAS  Google Scholar 

  164. Mirhashemihaghighi, S, Światowska, J, Maurice, V, Seyeux, A, Zanna, S, Salmi, E, Ritala, M, Marcus, P, “Corrosion Protection of Aluminium by Ultra-Thin Atomic Layer Deposited Alumina Coatings.” Corros. Sci., 106 16–24 (2016)

    Article  CAS  Google Scholar 

  165. Gudić, S, Radošević, J, Smoljko, I, Kliškić, M, “Cathodic Breakdown of Anodic Oxide Film on Al and Al-Sn Alloys in NaCl Solution.” Electrochim. Acta, 50 (28) 5624–5632 (2005)

    Article  Google Scholar 

  166. Tian, W, Li, S, Wang, B, Liu, J, Yu, M, “Pitting Corrosion of Naturally Aged AA 7075 Aluminum Alloys with Bimodal Grain Size.” Corros. Sci., 113 1–16 (2016)

    Article  CAS  Google Scholar 

  167. Szklarska-Smialowska, Z, “Pitting Corrosion of Aluminum.” Corros. Sci., 41 (9) 1743–1767 (1999)

    Article  CAS  Google Scholar 

  168. Perez, A, Billard, A, Rébéré, C, Berziou, C, Touzain, S, Creus, J, “Influence of Metallurgical States on the Corrosion Behaviour of Al-Zn PVD Coatings in Saline Solution.” Corros. Sci., 74 240–249 (2013)

    Article  CAS  Google Scholar 

  169. Reffass, M, Berziou, C, Rébéré, C, Billard, A, Creus, J, “Corrosion Behaviour of Magnetron-Sputtered Al1−x–Mnx Coatings in Neutral Saline Solution.” Corros. Sci., 52 (11) 3615–3623 (2010)

    Article  CAS  Google Scholar 

  170. Bielawski, M, “Development of Unbalanced Magnetron Sputtered Al-Mo Coatings for Cadmium Replacement.” Surf. Coat. Technol., 179 (1) 10–17 (2004)

    Article  CAS  Google Scholar 

  171. Creus, J, Billard, A, Sanchette, F, “Corrosion Behaviour of Amorphous Al-Cr and Al-Cr-(N) Coatings Deposited by dc Magnetron Sputtering on Mild Steel Substrate.” Thin Solid Films, 466 (1–2) 1–9 (2004)

    Article  CAS  Google Scholar 

  172. Perez, A, Sanchette, F, Billard, A, Rébéré, C, Berziou, C, Touzain, S, Creus, J, “Comparison of the Intrinsic Properties of EBPVD Al-Ti and Al-Mg Coatings.” Mater. Chem. Phys., 132 (1) 154–161 (2012)

    Article  CAS  Google Scholar 

  173. Sanchette, F, Billard, A, “Main Features of Magnetron Sputtered Aluminium–Transition Metal Alloy Coatings.” Surf. Coat. Technol., 142 218–224 (2001)

    Article  Google Scholar 

  174. Sanchette, F, Billard, A, Frantz, C, “Mechanically Reinforced and Corrosion-Resistant Sputtered Amorphous Aluminium Alloy Coatings.” Surf. Coat. Technol., 98 (1–3) 1162–1168 (1998)

    Article  CAS  Google Scholar 

  175. Bates, RI, Arnell, RD, “Microstructure of Novel Corrosion-Resistant Coatings for Steel Components by Unbalanced Magnetron Sputtering.” Surf. Coat. Technol., 89 (3) 204–212 (1997)

    Article  CAS  Google Scholar 

  176. Akiyama, E, Kawashima, A, Asami, K, Hashimoto, K, “The Corrosion Behavior of Sputter-Deposited Amorphous Al Cr Mo alloys in 1 M HCl.” Corros. Sci., 38 (2) 279–292 (1996)

    Article  CAS  Google Scholar 

  177. Baldwin, KR, Bates, RI, Arnell, RD, Smith, CJE, “Aluminium-Magnesium Alloys as Corrosion Resistant Coatings for Steel.” Corros. Sci., 38 (1) 155–170 (1996)

    Article  CAS  Google Scholar 

  178. Palma, E, Puente, JM, Morcillo, M, “The Atmospheric Corrosion Mechanism of 55% Al-Zn Coating on Steel.” Corros. Sci., 40 (1) 61–68 (1998)

    Article  CAS  Google Scholar 

  179. Rosalbino, F, Angelini, E, Maccio, D, Saccone, A, Delfino, S, “Influence of Rare Earths Addition on the Corrosion Behaviour of Zn-5% Al (Galfan) Alloy in Neutral Aerated Sodium Sulphate Solution.” Electrochim. Acta, 52 (24) 7107–7114 (2007)

    Article  CAS  Google Scholar 

  180. Edavan, RP, Kopinski, R, “Corrosion Resistance of Painted Zinc Alloy Coated Steels.” Corros. Sci., 51 (10) 2429–2442 (2009)

    Article  CAS  Google Scholar 

  181. Charrier, C, Jacquot, P, Denisse, E, Millet, JP, Mazille, H, “Aluminium and Ti/Al Multilayer PVD Coatings for Enhanced Corrosion Resistance.” Surf. Coat. Technol., 90 (1–2) 29–34 (1997)

    Article  CAS  Google Scholar 

  182. **e, T, Mao, S, Yu, C, Wang, S, Song, Z, “Structure, Corrosion, and Hardness Properties of Ti/Al Multilayers Coated on NdFeB by Magnetron Sputtering.” Vacuum, 86 (10) 1583–1588 (2012)

    Article  CAS  Google Scholar 

  183. Creus, J, Idrissi, H, Mazille, H, Sanchette, F, Jacquot, P, “Corrosion Behaviour of Al/Ti Coating Elaborated by Cathodic Arc PVD Process Onto Mild Steel Substrate.” Thin Solid Films, 346 (1–2) 150–154 (1999)

    Article  CAS  Google Scholar 

  184. Yoshioka, H, Yan, Q, Habazaki, H, Kawashima, A, Asami, K, Hashimoto, K, “Passivity and Its Breakdown on Sputter-Deposited Amorphous Al-Early Transition Metal Alloys in 1 M HCl at 30 C.” Corros. Sci., 31 349–354 (1990)

    Article  CAS  Google Scholar 

  185. Lauwerens, W, De Boeck, A, Thijs, M, Claessens, S, Van Stappen, M, Steenackers, P, “PVD Al–Ti and Al–Mn Coatings for High Temperature Corrosion Protection of Sheet Steel.” Surf. Coat. Technol., 146 27–32 (2001)

    Article  Google Scholar 

  186. Eisenhammer, T, Trampert, A, “Formation of Quasicrystalline AlCuFe by Physical Vapor Deposition: Phase Selection via Nanocluster Nucleation.” Phys. Rev. Lett., 78 (2) 262 (1997)

    Article  CAS  Google Scholar 

  187. Asami, K, Zhang, BP, Mehmood, M, Habazaki, H, Hashimoto, K, “Effects of Nanoscale Heterogeneity on the Corrosion Behavior of Non-Equilibrium Alloys.” Scr. Mater., 44 (8–9) 1655–1658 (2001)

    Article  CAS  Google Scholar 

  188. Akiyama, E, Kawashima, A, Asami, K, Hashimoto, K, “The Corrosion Behavior of Sputter-Deposited Amorphous Al-Cr-Mo Alloys in 1 M HCl.” Corros. Sci., 38 (2) 279–292 (1996)

    Article  CAS  Google Scholar 

  189. De Graeve, I, Schoukens, I, Lanzutti, A, Andreatta, F, Alvarez-Pampliega, A, De Strycker, J, Fedrizzi, L, Terryn, H, “Mechanism of Corrosion Protection of Hot-Dip Aluminium-Silicon Coatings on Steel Studied by Electrochemical Depth Profiling.” Corros. Sci., 76 325–336 (2013)

    Article  Google Scholar 

  190. Zandrahimi, M, Vatandoost, J, Ebrahimifar, H, “Al, Si, and Al-Si Coatings to Improve the High-Temperature Oxidation Resistance of AISI 304 Stainless Steel.” Oxid. Met., 76 (3) 347–358 (2011)

    Article  CAS  Google Scholar 

  191. Hu, TL, Huang, HL, Gan, D, Lee, TY, “The Microstructure of Aluminized Type 310 Stainless Steel.” Surf. Coat. Technol., 201 (6) 3502–3509 (2006)

    Article  CAS  Google Scholar 

  192. Xu, F, Gong, D, “Improved the Elevated Temperature Mechanical Properties of Al-Si Alloy Deposited with Al-Si Coating by Magnetron Sputtering.” Vacuum, 150 1–7 (2018)

    Article  CAS  Google Scholar 

  193. Kyo, Y, Yadav, AP, Nishikata, A, Tsuru, T, “Hydrogen Entry Behaviour of Newly Developed Al-Mg-Si Coating Produced by Physical Vapour Deposition.” Corros. Sci., 53 (9) 3043–3047 (2011)

    Article  CAS  Google Scholar 

  194. Shimogori, K, Satoh, H, Toyama, M, Nishimoto, H, Ikeda, K, Kawafuku, J, “Al-Cr Alloy Vapor-Deposited Material.” Google Patents, 1990

  195. Sanchette, F, Czerwiec, T, Billard, A, Frantz, C, “Sputtering of Al-Cr and Al-Ti Composite Targets in Pure Ar and in Reactive Ar-N2 Plasmas.” Surf. Coat. Technol., 96 (2–3) 184–190 (1997)

    Article  CAS  Google Scholar 

  196. Creus, J, Berziou, C, Cohendoz, S, Perez, A, Rébéré, C, Reffass, M, Touzain, S, Allely, C, Gachon, Y, Héau, C, “Reactivity Classification in Saline Solution of Magnetron Sputtered or EBPVD Pure Metallic, Nitride and Al-Based Alloy Coatings.” Corros. Sci., 57 162–173 (2012)

    Article  CAS  Google Scholar 

  197. Scheffel, B, Ehlers, KD, Schuhmacher, B, Floßdorf, FJ, Hagler, J, Metzner, C, Steffen, R, Steinbeck, G, “New Types of Coating Systems for Steel Sheets by High-Rate Evaporation in Combination with Plasma Processes.” Steel Res., 73 (3) 114–122 (2002)

    Article  CAS  Google Scholar 

  198. Espinosa, N, García-Valverde, R, Urbina, A, Lenzmann, F, Manceau, M, Angmo, D, Krebs, FC, “Life Cycle Assessment of ITO-Free Flexible Polymer Solar Cells Prepared by Roll-to-Roll Coating and Printing.” Solar Energy Mater. Solar Cells, 97 3–13 (2012)

    Article  CAS  Google Scholar 

  199. Lundberg, MW, Berger, R, Westlinder, J, Folkeson, N, Holmberg, H, “Novel Multilayered PVD-Coating in a Roll to Roll Mass Production Process.” ECS Trans., 57 (1) 2203 (2013)

    Article  Google Scholar 

  200. Schiller, S, Beister, G, Neumann, M, Jaesch, G, “Vacuum Coating of Large Areas.” Thin Solid Films, 96 (3) 199–216 (1982)

    Article  CAS  Google Scholar 

  201. Maeda, M, Umeda, S, Tsukiji, N, Narikawa, K, “The Product Made by a Zinc Vapor Deposition Line.” SAE Transactions, 179–184 (1986)

  202. Maeda, M, Ito, T, Aiko, T, Hashimoto, K, Furukawa, H, Yanagi, K, “Installation of a Continuous Zinc Vapor Deposition Line.” SAE Transactions, 172–178 (1986)

  203. Schuhmacher, B, Müschenborn, W, Stratmann, M, Schultrich, B, Klages, CP, Kretschmer, M, Seyfert, U, Förster, F, Tiller, HJ, “Novel Coating Systems and Surface Technologies for Continuous Processing of Steel Sheet.” Adv. Eng. Mater., 3 (9) 681–689 (2001)

    Article  CAS  Google Scholar 

  204. Metzner, C, Goedicke, K, Hoetzsch, G, Scheffel, B, Heinss, J-P, “Electron Beam-PVD for Enhanced Surface Properties on Metallic Strips and Sheets.” Surf. Coat. Technol., 94 663–668 (1997)

    Article  Google Scholar 

  205. Metzner, C, “PVD Coating of Metallic Sheets and Strips.” Vakuum in Forschung und Praxis, 12 (1) 45–52 (2000)

    Article  CAS  Google Scholar 

  206. Schuhmacher, B, Ehlers, KD, Floßdorf, FJ, Hagler, J, Metzner, C, Scheffel, B, Steffen, R, “Novel Coating Systems Based on PVD for Steel Sheet.” Vakuum in Forschung und Praxis, 13 (4) 233–235 (2001)

    Article  CAS  Google Scholar 

  207. Schiller, S, Metzner, C, Zywitzki, O, “New Coatings on Metal Sheets and Strips Produced Using EB PVD Technologies.” Surf. Coat. Technol., 125 (1–3) 240–245 (2000)

    Article  CAS  Google Scholar 

  208. Halpern, BL, “Fast Flow Deposition of Metal Atoms on Liquid Surfaces: Gold Sol Formation and Surface Lifetime.” J. Colloid Interface Sci., 86 (2) 337–343 (1982)

    Article  CAS  Google Scholar 

  209. Schmitt, JJ, “Method and Apparatus for the Deposition of Solid Films of a Material from a Jet Stream Entraining the Gaseous Phase of Said Material.” Google Patents, 1988

  210. Halpern, BL, Schmitt, JJ, Golz, JW, Di, Y, Johnson, DL, “Gas Jet Deposition of Thin Films.” Appl. Surf. Sci., 48 19–26 (1991)

    Article  Google Scholar 

  211. Adamson, TC, Jr, Nicholls, JA, “On the Structure of Jets from Highly Underexpanded Nozzles into Still Air.” J. Aerosp. Sci., 26 (1) 16–24 (1959)

    Article  Google Scholar 

  212. Smirnov, BM, Strizhev, AJ, “Kinetics of Clustering Processes in Expanding Vapor.” Physica Scr., 49 (5) 615 (1994)

    Article  CAS  Google Scholar 

  213. Ma, TP, “Gate Dielectric Properties of Silicon Nitride Films Formed by Jet Vapor Deposition.” Appl. Surf. Sci., 117 259–267 (1997)

    Article  Google Scholar 

  214. Rechsteiner, R, Ganiere, JD, “Calculation of Homogeneous Nucleation for a Source of Clusters with Thermalizing Carrier Gas.” Surf. Sci., 106 (1–3) 125–130 (1981)

    Article  CAS  Google Scholar 

  215. Komarenko, P, Drago, M, Gorski, M, Tamagawa, T, Halpern, B, “Jet Vapor Deposition.” Handbook of Deposition Technologies for Films and Coatings, pp. 881–901. Elsevier, 2010

  216. Schmitz, B, Colin, R, Economopoulos, M, “‘Jet Vapor Deposition’, A Novel Vacuum Coating Technique with Superior Properties.” Revue de Métallurgie, 97 (7–8) 971–978 (2000)

    Article  CAS  Google Scholar 

  217. Kawafuku, J, Katoh, J, Toyama, M, Ikeda, K, Nishimoto, H and Satoh, H, “Properties of Zinc Alloy Coated Steel Sheets Obtained by Continuous Vapor Deposition Pilot-line.” SAE Technical Paper, 1991

  218. Münz, R, Wolf, GK, Guzman, L, Adami, M, “Zinc/Manganese Multilayer Coatings for Corrosion Protection.” Thin Solid Films, 459 (1–2) 297–302 (2004)

    Article  Google Scholar 

  219. Nam, KH, Kim, SJ, Ko, KP, Kim, TY, Eom, MJ, “Vacuum Deposition Device for High-Speed Coating.” Google Patents, 2019

  220. Volovitch, P, Vu, TN, Allély, C, Aal, AA, Ogle, K, “Understanding Corrosion via Corrosion Product Characterization: II. Role of Alloying Elements in Improving the Corrosion Resistance of Zn-Al-Mg Coatings on Steel.” Corros. Sci., 53 (8) 2437–2445 (2011)

    Article  CAS  Google Scholar 

  221. Pinto, G, Silva, FJG, Porteiro, J, Miguez, JL, Baptista, A, Fernandes, L, “A Critical Review on the Numerical Simulation Related to Physical Vapour Deposition.” Procedia Manuf., 17 860–869 (2018)

    Article  Google Scholar 

  222. Bouzakis, KD, Gerardis, S, Skordaris, G, Bouzakis, E, “Nano-Impact Test on a TiAlN PVD Coating and Correlation Between Experimental and FEM Results.” Surf. Coat. Technol., 206 (7) 1936–1940 (2011)

    Article  CAS  Google Scholar 

  223. Chen, J, Ji, R, Khan, RHU, Li, X, Beake, BD, Dong, H, “Effects of Mechanical Properties and Layer Structure on the Cyclic Dynamic Loading of TiN-Based Coatings.” Surf. Coat. Technol., 206 (2–3) 522–529 (2011)

    Article  CAS  Google Scholar 

  224. Jensen, KF, Rodgers, ST, Venkataramani, R, “Multiscale Modeling of Thin Film Growth.” Curr. Opin. Solid State Mater. Sci., 3 (6) 562–569 (1998)

    Article  CAS  Google Scholar 

  225. Kapopara, JM, Mengar, AR, Chauhan, KV, Rawal, SK, “CFD Analysis Of Sputtered TiN Coating.” Mater. Today Proc., 4 (9) 9390–9393 (2017)

    Article  Google Scholar 

  226. Kapopara, JM, Mengar, AR, Chauhan, KV, Patel, NP, Rawal, SK, "Modelling and Analysis of Sputter Deposited ZrN Coating by CFD." Proc., 2016

  227. Śliwa, A, Mikuła, J, Gołombek, K, Tański, T, Kwaśny, W, Bonek, M, Brytan, Z, “Prediction of the Properties of PVD/CVD Coatings with the Use of FEM Analysis.” Appl. Surf. Sci., 388 281–287 (2016)

    Article  Google Scholar 

  228. Śliwa, A, Dobrzański, LA, Kwaśny, W, Sitek, W, “The Computer Simulation of Internal Stresses on the PVD Coatings.” Arch. Comput. Mater. Sci. Surf. Eng., 1 (3) 183–188 (2009)

    Google Scholar 

Download references

Acknowledgments

The authors thankfully acknowledge the financial support obtained from Research and Development Division of Tata Steel, India. AD thanks Dr. Atanu Banerjee and Dr. Atanu Ranjan Pal, R&D Division, Tata Steel for their valuable suggestions.

Author information

Authors and Affiliations

  1. Research and Development Division, Tata Steel, Jamshedpur, 831007, India

    Atasi Dan, Pavan Kumar Bijalwan, Abhishek Subhas Pathak & Amar Nath Bhagat

  2. Department of Physics, RCU Government Post Graduate College, Uttarkashi, 249193, Uttarakhand, India

    Pavan Kumar Bijalwan

Authors
  1. Atasi Dan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Pavan Kumar Bijalwan
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Abhishek Subhas Pathak
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Amar Nath Bhagat
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Atasi Dan.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Dan, A., Bijalwan, P.K., Pathak, A.S. et al. A review on physical vapor deposition-based metallic coatings on steel as an alternative to conventional galvanized coatings. J Coat Technol Res 19, 403–438 (2022). https://doi.org/10.1007/s11998-021-00564-z

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11998-021-00564-z

Keywords

Search

Navigation