Search
Search Results
-
Free Vibration Analysis of Jute-Epoxy Polymer as Skin Layers and Tea Waste/Epoxy as a Core Layer-Based Sandwich Plate Through Experimental and AI Approach
The current research work addresses the free vibration analysis of the sandwich plate with jute-reinforced composite skins and tea-waste epoxy mixed...
-
-
Study on the Precipitation Strengthening Mechanism of Mg–10Zn–5Al–0.2Sc Alloy
The Mg–10Zn–5Al–0.2Sc (wt%) alloy was fabricated through gravity casting and subsequent heat treatment. The microstructure and precipitates of the...
-
Experimental evidence and analysis of memory in liquid crystal materials
In the present work, three thermotropic liquid crystal materials comprising of 4—butyl benzoic acid and various alkyloxy benzoic acids are prepared....
-
Comprehensive Study on the Microstructural Characterization and Strengthening Mechanism of (α + β) Based Ti-6Al-7Nb Alloy Processed Via Mechanical Alloying and Spark Plasma Sintering
This study investigates the severe plastic deformation of Ti–6Al–7Nb alloy synthesized through mechanical alloying (MA, 0–120 h) and subsequently...
-
Constructing three-dimensional hydrogen-bonding network and porous film from chitosan enables high-performance silicon@carbon anode
Anodes based on silicon@carbon (Si@C) composites are expected to be used in the next generation of commercial lithium-ion batteries due to their high...
-
Deep learning for electrolysis process anode effect prediction based on long short-term memory network and stacked denoising autoencoder
The anode effect is a common failure in the aluminium electrolysis industry. If the anode effect cannot be accurately predicted, it will cause...
-
Switchable p–n–p conduction and thermoelectric properties of selenium-doped tellurium crystal
Switchable conductivity in elementary semiconducting materials has a high potential for the design of diodes, transistors and energy conversion...
-
Programming an efficient technique for designing smart C-doped MIC with dual self-protection for information and high-energy
Constructing self-protected metastable intermolecular composites (MICs) enables the regulation of microstructures towards boosting controllable...
-
Aqueous Black Seed (Nigella sativa L.) Extract-Mediated Corrosion Inhibition in Mild Steel Exposed to 3.5% NaCl: Effect of Temperature, pH, Time, and In Situ Analysis Using Atomic Force Microscopy
Atomic force microscopy (AFM)-based analysis on the corrosion inhibition properties of aqueous black seed extract for mild steel exposed to 3.5% NaCl...
-
Role of Grain Boundary Strength on Yielding Behavior and Uniaxial Tensile Properties in Ferritic Steels
The yield-point phenomenon in recrystallized ferritic steels is often associated with the dislocation multiplication mechanism, wherein the yield...
-
Additive manufacturing and mechanical analysis of multi-material polymer parts combining thermosets and thermoplastics
Multi-material additive manufacturing (AM) represents one of the most promising solutions to target the contemporary demand for complex products with...
-
Comparative analysis of the effect of magnesium and zinc on the structure and mechanical properties of hot-rolled and cold-rolled alloy Al–2%Cu–1.5%Mn sheets
In this study, using an example of cold-rolled sheets, the separate effect of magnesium and zinc in an amount up to 2% upon the structure and...
-
Growth Kinetics and Development of the Solid–Liquid Interface in Low-Carbon and High-Alloy Steel Castings Enabled by Confocal Microscopy
High-Temperature Laser Scanning Confocal Microscopy (HT-LSCM) is an in situ technique that can be used for direct observation of the microstructure...
-
Refinement Mechanism of the Hypoeutectic Al–7Si Alloy by Adding a Novel La-Rich Rare-Earth Grain Refiner
Refining the grain size of the as-casted hypoeutectic Al–Si alloys is an established technique for improving their mechanical properties. This work...
-
The effect of nanoclay (NC) on mechanical, thermal, and morphological properties of wood plastic composite (WPC) based on recycled polyethylene (rPE) and kenaf fiber
This development contributes to the effects of nanoclay (NC) on mechanical, thermal, and morphological properties of wood plastic composites (WPC)....
-
-
Real-Time Dust Monitoring in Occupational Environments: A Case Study on Using Low-Cost Dust Monitors for Enhanced Data Collection and Analysis
A worker’s personal exposure to respirable dust in occupational environments has traditionally been monitored using established methodologies which...
-
Process Mechanisms and Variables Affecting Shock-Consolidation of Diamond Powders
Shock consolidation was utilized to compact diamond powders for fabrication of 10 mm diameter by 1 mm thick wafers for possible electronic...
-
NOx treatment’s photocatalytic activity using the Ag/SnO2/polypropylene
Environmental and materials scientists are becoming more interested in catalytic materials for use in filtration and remediation of contaminated...
